PROSAT® Sterile™ Polynit Heatseal LE Wipes are made of 100% knitted polyester Polynit Heatseal, presaturated with a blend of 70% isopropanol and 30% water for injection (WFI). Each lot is tested before release and low endotoxin certified to less than <1EU/wipe. The sealed edge…

MiraSAT™ 70/30 is pre-saturated with 70% Semiconductor Grade IPA & 30% Ultrapure Water(UPW) & incorporates Foamtec’s industry-leading MiraWIPE™ Microfiber sealed edge wiper. The unique woven microfiber wiper wetted with only 7.2mL of fluid enables scrubbing like cleaning…

Valutek’s pre-wetted spunlace non-woven wiper is composed of a hydro entangled, nonwoven blend of 55% cellulose and 45% polyester pre-wetted with a blend of isopropyl alcohol and DI water. The pre-wetted format enhances the wipers absorbent capacity, effectiveness, and reduces airbone…

AlphaWipe is constructed from 100% continuous-filament polyester in a double-knit, no-run interlock pattern. Cleanroom laundered and packaged, AlphaWipe is an ultraclean and highly sorbent wiper ideal for critical environments. AlphaWipe has a laundered cut edge. It exhibits low particle and fiber…

Valutek’s pre-wetted laser sealed polyester wiper is composed of 100% continuous-filament polyester fabric pre-wetted with a blend of isopropyl alcohol and DI water. The pre-wetted format enhances the wipers absorbent capacity, effectiveness, and reduces airborne contamination from…

Sterile SatPax 1000 combines Durx 670 nonwoven wipers composed of a hydroentangled nonwoven blend of 55% cellulose and 45% polyester with a high saturation level of 70% IPA and 30% DI water. This pre-wetted format provides a cost effective and easy to use solution versus traditional bulk…

PROSAT® Polynit Heatseal Wipes are manufactured from 100% knitted textured polyester with laser-cut sealed edges for very low levels of particles and fibers. Polyester wipes are chemically resistant and exceptionally low in particles and fibers. An interlock knit creates a durable fabric, the…

TekniClean ™ LX Polyester Knit Wipers Available in cleanliness levels for ISO 4 and higher cleanrooms with edge finishes suitable for a wide range of applications, Teknipure™ LX is made via an Ultra-Clean proprietary manufacturing process that reduces the potential for shedding…

PROSAT® Sterile™ Polywipe-C Heatseal Wipes are made from a standardweight 100% knitted polyester that is laser cut to bond the fibers at the edges of the wipe. The wipe is chemical resistant and exceptionally low in particles and extractable residue making it ideal for critical cleaning.…

Valutek’s pre-wetted polyester wiper is composed of 100% continuous-filament polyester fabric pre-wetted with a blend of isopropyl alcohol and DI water. The pre-wetted format enhances the wiper’s absorbent capacity, effectiveness, and reduces airborne contamination from traditional…

Combining the benefits of validated sterility, a clean nonwoven and the all-purpose concentration of 70% IPA, these wipes are versatile and dependable. Packaged in a convenient resealable pouch, a range of wet wiping tasks that require validated sterility become more cost effective and efficient.…

Sealed edges Cleanroom Class 10 (ISO Class 4) 100% Polyester Pre-saturated in 70% IPA/30% DI Water FREE-SAT ULTIMATE 70™ pre-saturated wipers are made of 100% polyester. These wipes have heat sealed edges. A laser beam cuts and melts each fiber along the edges, eliminating…

TekniCleanTM LX Polyester Knit Wipers Available in cleanliness levels for ISO 3 and higher cleanrooms with edge finishes suitable for a wide range of applications, Teknipure™ LX is made via an Ultra-Clean proprietary manufacturing process that reduces the potential for shedding while e…

With the benefits of a critically clean nonwoven and the all-purpose concentration of 70% IPA, these wipes are versatile and dependable. Packaged in a convenient resealable pouch, a range of wet wiping tasks become more cost effective and efficient. Recommended for ISO 5-8 controlled environments. …

TekniClean ™ LX Polyester Knit Wipers Available in cleanliness levels for ISO 4 and higher cleanrooms with edge finishes suitable for a wide range of applications. TekniClean™ LX is made via an Ultra-Clean proprietary manufacturing process that reduces the potential for shedding…

PROSAT® Sterile™ Polynit Heatseal Wipes are made of 100% knitted polyester that is laser cut to bond the fibers at the edges of the wipe. This creates a very clean nonabrasive edge that allows full utilization of the wipe surface. The wipe is chemical resistant and exceptionally low in…

Pharma-Sat Plus™ wipers are low endotoxin, ISO Class 5, non-woven, 45% polyester / 55% cellulose blended wipers that are sterile. Our economical, non-shedding, pre-saturated wipers can be used throughout your cleanroom for cleaning, disinfecting, spill control and wipe down of products.…

Validated sterile for the most exacting standards, these wipes feature extremely soft polypropylene and pure IPA for wiping delicate, scratch-sensitive surfaces. With high resistance to acids and many chemicals, these wipes are excellent for removing residues from surfaces and general wet wiping.…

Teknisat nonwoven wipes are made from a hydroentangled of 55% cellulose / 45% polyester which creates a strong, clean & absorbant wiper. Saturated with 70% Pure Isopropry Alcohol & 30% 18Mohm DI water in precise saturation level provide excellent wipe down/pick up with economy in mind. This…

TekniMax ™ EX Knitted Microfiber Heavy-weight and durable, TekniMax™ EX utilizes a proprietary weaving pattern to create pillowed loops of sweeping power to efficiently wipe away micro-contamination from even the roughest surfaces. APPLICATIONS Best choice for…

Sterile Presat Wiper Validated Sterile by Gamma Irradiation Nonwoven Polyester Fabric 9"x9" Double Bagged

Valutek’s pre-wetted pressure-heat sealed polyester wiper is composed of 100% continuous-filament polyester fabric pre-wetted with a blend of isopropyl alcohol and DI water. The pre-wetted format enhances the wipers absorbent capacity, effectiveness, and reduces airborne contamination from…

TekniMaxTM DX Nonwoven Microfiber Designed for frequent use on transparent or sensitive surfaces, TekniMax™ DX restores cleanliness by removing haze, fine particles, or oily residue build-up in a single swipe APPLICATIONS Optics & Sensor Cleaning Polishing Surfaces…

TekniClean ™ LX Polyester Knit Wipers Available in cleanliness levels for ISO 3 and higher cleanrooms with edge finishes suitable for a wide range of applications, Teknipure™ LX is made via an Ultra-Clean proprietary manufacturing process that reduces the potential for shedding…

Tekniclean microfiber wipes are constructed with mixed weave yarn, as fine as 0.1 decitex, knitted extremely tight to ensure durability. The structure of the yarn (30% Nylon / 70% Polyester) provides hydrophilic properties of nylon, loipophilic polyester properties, and the capillary effect of the…

SatPax 1000 combines Durx 670 nonwoven wipers composed of a hydroentangled nonwoven blend of 55% cellulose and 45% polyester with various saturation levels of isopropyl alcohol and DI water. This pre-wetted format provides a cost effective and easy to use solution versus traditional bulk handling…