70% IPA - 30% DI Water, White
-
PROSAT® Sterile™ Polynit Heatseal LE Wipes are made of 100% knitted polyester Polynit Heatseal, presaturated with a blend of 70% isopropanol and 30% water for injection (WFI). Each lot is tested before release and low endotoxin certified to less than <1EU/wipe. The sealed edge…
-
Contec's PROSAT® Sterile™ Polypropylene wipes are presaturated with 70% denatured ethanol and 30% deionized water. The meltblown polypropylene wipes provide a consistent release of solvent to thoroughly remove surface contaminants in critical environments. The PROSAT®…
-
PROSAT® Polynit Heatseal Wipes are manufactured from 100% knitted textured polyester with laser-cut sealed edges for very low levels of particles and fibers. Polyester wipes are chemically resistant and exceptionally low in particles and fibers. An interlock knit creates a durable fabric, the…
-
TechniSat incorporates a pre-wetted fabric blend of nonwoven hydroentangled 55% cellulose and 45% polyester. This fabric combines the highly absorbent properties of a natural fiber with the cleanliness and strength of a synthetic fiber. It offers low particle counts, low extractable levels and…
-
TekniCleanTM LX Polyester Knit Wipers Available in cleanliness levels for ISO 3 and higher cleanrooms with edge finishes suitable for a wide range of applications, Teknipure™ LX is made via an Ultra-Clean proprietary manufacturing process that reduces the potential for shedding while e…
-
PROSAT® Sterile™ Polynit Heatseal Wipes are made of 100% knitted polyester that is laser cut to bond the fibers at the edges of the wipe. This creates a very clean nonabrasive edge that allows full utilization of the wipe surface. The wipe is chemical resistant and exceptionally low in…
-
TekniClean ™ LX Polyester Knit Wipers Available in cleanliness levels for ISO 3 and higher cleanrooms with edge finishes suitable for a wide range of applications, Teknipure™ LX is made via an Ultra-Clean proprietary manufacturing process that reduces the potential for shedding…
-
Sterile SatPax 1000 combines Durx 670 nonwoven wipers composed of a hydroentangled nonwoven blend of 55% cellulose and 45% polyester with a high saturation level of 70% IPA and 30% DI water. This pre-wetted format provides a cost effective and easy to use solution versus traditional bulk…
-
Combining the benefits of validated sterility, a clean nonwoven and the all-purpose concentration of 70% IPA, these wipes are versatile and dependable. Packaged in a convenient resealable pouch, a range of wet wiping tasks that require validated sterility become more cost effective and efficient.…
-
Process2wipe IPA70 Zip-Lock Style Packaging
Veltek AssociatesProcess2Wipe saturated wipes are designed for aseptic and non-aseptic wipe downs of filling and packaging machinery, stainless steel surfaces, Lexan, polycarbonate, glass, and any critical surfaces that require cleaning. The 100% continuous polyester fiber is clean and absorbent
-
AlphaWipe is constructed from 100% continuous-filament polyester in a double-knit, no-run interlock pattern. Cleanroom laundered and packaged, AlphaWipe is an ultraclean and highly sorbent wiper ideal for critical environments. AlphaWipe has a laundered cut edge. It exhibits low particle and fiber…
-
PROSAT® Sterile™ Polywipe-C Heatseal Wipes are made from a standardweight 100% knitted polyester that is laser cut to bond the fibers at the edges of the wipe. The wipe is chemical resistant and exceptionally low in particles and extractable residue making it ideal for critical cleaning.…
-
MiraSAT™ 70/30 Wipers
Foamtec InternationalMiraSAT™ 70/30 is pre-saturated with 70% Semiconductor Grade IPA & 30% Ultrapure Water(UPW) & incorporates Foamtec’s industry-leading MiraWIPE™ Microfiber sealed edge wiper. The unique woven microfiber wiper wetted with only 7.2mL of fluid enables scrubbing like cleaning…
-
With the benefits of a critically clean nonwoven and the all-purpose concentration of 70% IPA, these wipes are versatile and dependable. Packaged in a convenient resealable pouch, a range of wet wiping tasks become more cost effective and efficient. Recommended for ISO 5-8 controlled environments. …
-
70% Isopropyl Alcohol Presaturated Wipes in Canister
FG Clean WipesPerfect for on-the-go cleaning and maintenance, these critically clean polyester cellulose wipes are presaturated with 70% IPA / 30% DI water and packaged in convenient canisters. Spring-closed lids help keep wipes from drying out prematurely. Recommended for ISO 5-8 critical environments. …
-
PHARMA-SAT PLUS™ 70% IPA Sterile Polyester/Cellulose Wipers
Acute Care PharmaceuticalsPharma-Sat Plus™ wipers are low endotoxin, ISO Class 5, non-woven, 45% polyester / 55% cellulose blended wipers that are sterile. Our economical, non-shedding, pre-saturated wipers can be used throughout your cleanroom for cleaning, disinfecting, spill control and wipe down of products.…
-
Tekniclean microfiber wipes are constructed with mixed weave yarn, as fine as 0.1 decitex, knitted extremely tight to ensure durability. The structure of the yarn (30% Nylon / 70% Polyester) provides hydrophilic properties of nylon, loipophilic polyester properties, and the capillary effect of the…
-
FREE-SAT™ ULTIMATE 70™ Pre-Saturated Polyester Wipers
High Tech ConversionsSealed edges Cleanroom Class 10 (ISO Class 4) 100% Polyester Pre-saturated in 70% IPA/30% DI Water FREE-SAT ULTIMATE 70™ pre-saturated wipers are made of 100% polyester. These wipes have heat sealed edges. A laser beam cuts and melts each fiber along the edges, eliminating…
-
Kimtech™ W4 Pre-Saturated Wipers
Kimberly-Clark ProfessionalDo you require a wiper for a sterile environment, like clean rooms, medical equipment manufacturing or the biotech industry? Kimtech™ Pure W4 Sterile PreSat Alcohol Wipers could be right for your business. The 100% polypropylene sterile wipers come pre-saturated with 70% isopropyl alcohol…
-
TekniZorb ™ LXS Meltblown Polypropylene TekniZorbTM LXS offers a very low-shedding wiping solution to deposit IPA while effectively removing residue from the surface in your controlled environment. APPLICATIONS Ideal for efficient surface cleaning and sanitization between…
-
Contec's PROSAT ® Sterile ™ Polypropylene wipes are presaturated with 70% USP grade isopropanol and 30% deionized water. The meltblown polypropylene wipes provide a consistent release of solvent to thoroughly remove surface contaminants in critical environments. The PROSAT…
-
9" x 9" 70% IPA Presat Polypropylene Pouches
FG Clean WipesValidated sterile for the most exacting standards, these wipes feature extremely soft polypropylene and pure IPA for wiping delicate, scratch-sensitive surfaces. With high resistance to acids and many chemicals, these wipes are excellent for removing residues from surfaces and general wet wiping.…
-
Pre-Wetted Wipers
ValutekValutek’s pre-wetted spunlace non-woven wiper is composed of a hydro entangled, nonwoven blend of 55% cellulose and 45% polyester pre-wetted with a blend of isopropyl alcohol and DI water. The pre-wetted format enhances the wipers absorbent capacity, effectiveness, and reduces airbone…
-
Pre-Wetted Wipers
ValutekValutek’s pre-wetted pressure-heat sealed polyester wiper is composed of 100% continuous-filament polyester fabric pre-wetted with a blend of isopropyl alcohol and DI water. The pre-wetted format enhances the wipers absorbent capacity, effectiveness, and reduces airborne contamination from…
-
TechniCloth wipers pre-wetted with 70% isopropyl alcohol and sterilized Sterile TechniSat is constructed from a hydroentangled polyester/cellulose blend that is pre-wetted with 70% isopropyl alcohol and packaged in a resealable flexpack. Each package is gamma irradiated to 10‰ÛÒ6 Sterility…
-
Pre-Wetted Wipers
ValutekValutek’s pre-wetted polyester wiper is composed of 100% continuous-filament polyester fabric pre-wetted with a blend of isopropyl alcohol and DI water. The pre-wetted format enhances the wiper’s absorbent capacity, effectiveness, and reduces airborne contamination from traditional…
-
These PROSAT® Sterile™ Theta™ Wipes are manufactured from a lightweight hydroentangled cellulose/polyester and saturated with a solution of 70% USP grade IPA and 30% deionized water. A cost effective wipe ideal for transfer disinfection and general cleaning, PROSAT®…
-
TekniClean ™ LX Polyester Knit Wipers Available in cleanliness levels for ISO 4 and higher cleanrooms with edge finishes suitable for a wide range of applications. TekniClean™ LX is made via an Ultra-Clean proprietary manufacturing process that reduces the potential for shedding…