25 g, Bottle, Plastic
-
Sodium chloride, 99.999% trace metals basis
BeanTown ChemicalCAS: 7647-14-5 EC No: 231-598-3 MDL No: MFCD00003477 RTECS: VZ4725000 Solid Linear Formula: NaCl MW: 58.44 Melting Point: 801° Boiling Point: 1413° Density (g/mL): 2.165 Refractive Index: 1.544
-
Potassium carbonate, ACS, 99.0% min.
BeanTown ChemicalCAS: 584-08-7 EC No: 209-529-3 MDL No: MFCD00011382 RTECS: TS7750000 Granular Linear Formula: K2CO3 MW: 138.21 Melting Point: 891° Density (g/mL): 2.43
-
Titriplex® VI
MilliporeSigmaSynonyms 3,6-Dioxaoctamethylenedinitrilotetraacetic acid, Ethylenedioxybis(ethylenenitrilo)tetraacetic acid, Bis(aminoethyl)glycolether-N,N,N,N'-tetraacetic acid, Ethylene glycol-bis (ß-amino ethyl ether)-N,N'-tetraacetic acid Hill Formula …
-
Sodium 1-pentanesulfonate monohydrate, HPLC, 99% min.
BeanTown ChemicalCAS: 207605-40-1 EC No: 245-208-4 MDL No: MFCD00007541 Crystalline Molecular Formula: C5H11NaO3S·H2O MW: 192.21
-
Hydroxylamine sulfate, 99%
BeanTown ChemicalCAS: 10039-54-0 EC No: 233-118-8 MDL No: MFCD00044869 RTECS: NC5425000 UN No: UN2865; Haz Class: 8; Packing Group: III Crystalline Linear Formula: NH2OH·0.5H2SO4 MW: 164.14 Melting Point: 170° (decomposes) Density (g/mL): 1.88
-
Uridine 5'-monophosphate, disodium salt, 99%
BeanTown ChemicalCAS: 3387-36-8 EC No: 222-211-9 MDL No: MFCD00006525 RTECS: YU7975000 Solid Molecular Formula: C9H11N2O9P MW: 368.14 Melting Point: 209° (decomposes)
-
Thiamine Hydrochloride
MP BiomedicalsThiamine (Vitamin B1) is one of the essential vitamins and is required for carbohydrate metabolism. Thiamine hydrochloride is used as a food-additive to add a brothy/meaty flavor to gravies or soups. It is also used as food supplement. Used in fluorometric determination of mercury.
-
Cholesterol
MP BiomedicalsCholesterol is the principal sterol of the higher animals, found in all body tissues. It is the main constituent of gallstones and all biological membranes. Approximately 25% of total brain lipid is cholesterol. Cholesterol is suitable for use in liposome preparations.
-
Iron nanopowder, APS 10-30nm, 99.9% trace metals basis
BeanTown ChemicalCAS: 7439-89-6 EC No: 231-096-4 MDL No: MFCD00010999 RTECS: NO4565500 UN No: UN3089; Haz Class: 4.1; Packing Group: II Powder, FeO layer 0.5-1.5nm Molecular Formula: Fe MW: 55.85 Melting Point: 1535° Boiling Point: 2750° Density (g/mL): 7.86
-
12-Molybdophosphoric acid hydrate, ACS
BeanTown ChemicalCAS: 51429-74-4 EC No: 234-713-5 MDL No: MFCD00149913 UN No: UN3085; Haz Class: 5.1 (8); Packing Group: III Granular Linear Formula: H3PO4·12MoO3·xH2O MW: 185.25 Density (g/mL): 3.15
-
Quercetin dihydrate, 97%
BeanTown ChemicalCAS: 6151-25-3 EC No: 204-187-1 MDL No: MFCD00149487 RTECS: LK8950000 UN No: UN2811; Haz Class: 6.1; Packing Group: III Powder Molecular Formula: C15H10O7·2H2O MW: 338.28 Melting Point: 310-315°
-
Vanadium(V) trifluoride oxide, 99%
BeanTown ChemicalCAS: 13709-31-4 EC No: 237-250-7 MDL No: MFCD00042555 UN No: UN3290; Haz Class: 6.1 (8); Packing Group: II Powder Linear Formula: VOF3 MW: 123.94 Melting Point: 300°
-
Agarose
MP BiomedicalsAgarose is a purified linear galactan hydrocolloid isolated from agar or agar-bearing marine algae. Allows recovery of active DNA after separation, with minimal inhibition of restriction and ligation enzymes Suitable for both analytical and preparative electrophoresis procedures Good…
-
Benzalkonium Chloride
MP BiomedicalsBenzalkonium Chloride is a quaternary ammonium salt. It is a cationic surface active agent and germicide. It is not effective against gram-negative bacteria or picornaviruses and it is not recommended for treatment of sanitizing critical or semicritical medical instruments. It has been reported…
-
Cesium Chloride
MP BiomedicalsCesium chloride , an inorganic compound, is an important source of cesium ions in a variety of applications. Its crystal structure forms a major structural type where each cesium ion is coordinated by 8 chlorine ions. Cesium chloride occurs naturally in mineral waters and as an impurity in…
-
Dolomite, naturally occurring mineral, grains, approximately 1.5-4.8mm
BeanTown ChemicalCAS: 12001-27-3 MDL No: MFCD03613593 Solid Linear Formula: CaMg(CO3)2 MW: 184.40
-
Chromium(III) oxide, 99.95% trace metals basis
BeanTown ChemicalCAS: 1308-38-9 EC No: 215-160-9 MDL No: MFCD00010949 RTECS: GB6475000 -22 Mesh Powder Molecular Formula: Cr2O3 MW: 151.99
-
Gallium(III) oxide, 99.999% trace metals basis
BeanTown ChemicalCAS: 12024-21-4 EC No: 234-691-7 MDL No: MFCD00011020 -50 Mesh Powder Molecular Formula: Ga2O3 MW: 187.44 Melting Point: 1900° Density (g/mL): 5.88
-
ß-D-Glucose
MP Biomedicalsβ-D-Glucose is a main source of energy for living organisms. It is combined into glucosides, disaccharides, oligosaccharides, the polysaccharides (cellulose and starch), and glycogen. β-D-glucose may contain up to 10% of α-isomer.
-
Tetra-n-butylammonium hexafluorophosphate, 98%
BeanTown ChemicalCAS: 3109-63-5 EC No: 221-472-6 MDL No: MFCD00011748 Solid Molecular Formula: C16H236F6NP MW: 387.44 Melting Point: 244-246°
-
Sodium 1-octanesulfonate hydrate, HPLC, 99.0% min.
BeanTown ChemicalCAS: 5324-84-5 EC No: 226-195-4 MDL No: MFCD00007544 Crystalline Molecular Formula: C8H17NaO3S·xH2O MW: 216.28 (anhydrous) Melting Point: >300°
-
N-Acetyl-L-cysteine, 98%
BeanTown ChemicalCAS: 616-91-1 EC No: 210-498-3 MDL No: MFCD00004880 RTECS: HA1660000 Powder Molecular Formula: C5H9NO3S MW: 163.20 Melting Point: 106-108°
-
Bis-Tris
MP BiomedicalsBis-Tris is a zwitterionic buffer; an amine buffer similar to Tris Hydrochloric acid that exhibits only a very small shift in dissociation constant with respect to temperature. It is structurally analogous to the the Good buffers that were developed to provide buffers in the pH range of 6.15 - 8.35…
-
Bisphenol A diglycidyl ether
BeanTown ChemicalCAS: 1675-54-3 EC No: 216-823-5 MDL No: MFCD00080480 RTECS: TX3800000 Liquid Molecular Formula: C21H24O4 MW: 340.41 Density (g/mL): 1.16
-
Molybdenum slug, 6.35mm dia. x 12.7mm length, 99.95% trace metals basis
BeanTown ChemicalCAS: 7439-98-7 EC No: 231-107-2 MDL No: MFCD00003465 Solid Molecular Formula: Mo MW: 95.94 Melting Point: 2617° Boiling Point: 4612° Density (g/mL): 10.3
-
Potassium dihydrogen phosphate, 99.999% trace metals basis
BeanTown ChemicalCAS: 7778-77-0 EC No: 231-913-4 MDL No: MFCD00011401 RTECS: TC6615500 Solid Linear Formula: KH2PO4 MW: 136.09 Melting Point: 253° Density (g/mL): 2.338
-
D-(+)-Mannose
MP BiomedicalsMannose is a sugar monomer of the aldohexose series of carbohydrates. Mannose is a C-2 epimer of glucose. Mannose is important in human metabolism, especially in the glycosylation of certain proteins. Several congenital disorders of glycosylation are associated with mutations in enzymes involved in…
-
Ammonium molybdate, 99.99% trace metals basis
BeanTown ChemicalCAS: 13106-76-8 EC No: 236-031-3 MDL No: MFCD00011596 RTECS: QA4900000 Powder/Lump Linear Formula: (NH4)2MoO4 MW: 196.01
-
L-Methionine
MP BiomedicalsMethionine is one of the common sulfur-containing amino acids. Methionine is a common methyl-group donor to various substrates, such as creatine, epinephrine, ergosterol, and choline. L-Methionine is used as an essential amino acid for human development and therapeutically acts as an antidote…
-
Lithium nitrate, anhydrous, 99%
BeanTown ChemicalCAS: 7790-69-4 EC No: 232-218-9 MDL No: MFCD00011094 UN No: UN2722; Haz Class: 5.1; Packing Group: III Crystalline Molecular Formula: LiNO3 MW: 68.95 Melting Point: 264°
-
2-Phenoxyethyl bromide, 98%
BeanTown ChemicalCAS: 589-10-6 EC No: 209-634-4 MDL No: MFCD00000234 Crystalline Molecular Formula: C8H9BrO MW: 201.06 Melting Point: 31-34° Boiling Point: 144°/40 mmHg Flash Point: 65°C (149°F)
-
Aluminum oxide, gamma-phase, 99%
BeanTown ChemicalCAS: 1344-28-1 EC No: 215-691-6 MDL No: MFCD00003424 20nm APS Powder, S.A. 100-200 m2/g Molecular Formula: Al2O3 MW: 101.96 Melting Point: 2040°