Glass, Supplies, 50 mL
-
Gay-Lussac With capillary glass stopper ground to flat-sided point for take-off of overflow 10 mL and 25 mL sizes are for ASTM Standard D 369 and Barrett test H-8; AASHTO standard T-74 *min order of 10 each
-
PYREX Graduated Cylinder
CorningLifetime Red™ Graduated Cylinders Capacity control is the most important specification for graduated cylinders. Class B tolerances. Corning assures accuracy through precision-drawn tubing and precise calibrations. All cylinders are manufactured to ASTM E 1272 which describes standard…
-
PYREX Boiling Flasks
CorningCarefully designed and manufactured from borosilicate glass Wall thicknesses are carefully controlled to provide the proper balance between thermal expansion and mechanical strength for greater shock resistance Excellent chemical durability provides contamination-free results and long life…
-
Short neck Heavy wall PYREX round bottom boiling flasks have full-length outer Standard Taper joints, but with shorter necks. They are manufactured from No. 7740 borosilicate glass. Wall thicknesses are carefully controlled to provide the proper balance between thermal expansion and…
-
Calibrated "to contain" at 20°C Accuracy tolerances approximately twice those specified for Class A
-
Full length 24/40 joint on all sizes except 50 mL, which has Standard Taper 19/38 joint Graduated scale indicates approximate volumes Extra large marking space
-
These PYREX® graduated cylinders are calibrated “to contain” (TC) and are equipped with a 24/40 Standard Taper outer joint. These cylinders are particularly useful as distilling receivers. Graduations are in durable white enamel. Supplied without stoppers. For hollow glass Standard…
-
PYREX® VISTA volumetric flasks provide precise volume measurement. The necks are tooled for Standard Taper glass stoppers. The graduation line is sharp and permanent and large blue block letters make the inscription easy to read. The 1 mL and 2 mL sizes are test tube shaped. These Class A…
-
PYREX Polyethylene Bumper Guard
CorningBumper guard is a polyethylene shock absorbing ring designed to reduce the breakage of cylinders. For best results, slide the ring toward the top to absorb shock should the cylinder be accidentally upset.
-
Specific Gravity Bottles, Pycnometers, Medium Length
DWK Life Sciences (Kimble)Special medium length Ts 10/18 thermometer with a range of 14 to 38°C in 0.2° Accuracy within ±0.2°C Cap for the side tube is Standard Taper 5/12 and has small vent near the top Each flask body is numbered for easy identification The 50 mL size is used to obtain the specific gravity of…
-
-
Calibrated to Class A ASTM E-542 and E-288 Supplied with a certificate of identification Traceable to NIST standards The graduation line is sharp and permanent. Large white block letters make it easy to read. Supplied with a Standard Taper stopper.
-
Low Form, Heavy Duty Glass Beakers
United Scientific SuppliesHeavy duty beakers are ideal for tough handling conditions including mechanized washing. Beakers feature a double graduated metric scale and a marking area. Tolerance is approximately ± 5%.
-
Weighing Bottles, Low Form With Glass Stopper
DWK Life Sciences (Kimble)Low Form, KIMAX® Brand (Kimble 15165) Of borosilicate glass, with Standard Taper glass stopper. Bottom part of stopper is sealed. Designed from Federal Specification NNN-B-1493. Dimensions indicated in table are i.d. x height without cap.
-
PYREX Low Weighing Bottles
CorningShort length Standard Taper joints Capacities from 35 to 82 mL These PYREX low form weighing bottles have a Standard Taperjoint style opening that accepts a closed bottom, hollow pennyhead style stopper.
-
Shake Flasks
DWK Life Sciences (Wheaton)For use with orbital or reciprocating shakers Baffles improve aeration and mixing for microbial and bacterial cultures Break resistant lip for use with stopper, cotton plug or film cover Pinched neck design to reduce splashing on flasks with 4 baffles Autoclavable borosilicate…
-
Flask 50ml
DWK Life Sciences (Kimble)Kontes™ flask with three angle necks for heating, stirring and solvent stripping without impairing ease of liquid and solid transfer. Three-neck heavy wall round-bottom flask with Standard Taper outer joints Side necks are angled Manufactured from 33 expansion, low extractable…
-
Calibrated "to contain" Tolerances ±5% Inexpensive, designed for those institutions performing many laboratory procedures PYREX® glass has proven itself to be tough and reliable for over 75 years of demanding use in the laboratory environment. The PYREX® name…
-
-
These Class A PYREX® volumetric flasks have machine-blown bodies to which are sealed heavy-beaded, heavy-tubing necks, tooled for No. 9 PTFE color-coded keyhole stoppers. For replacement stoppers see No. 7630. The graduation line is sharp and permanent. Large white block letters make the…
-
Jacketed Double Sidearm Celstir® Spinner Flasks
DWK Life Sciences (Wheaton)The Double-Sidearm Celstir with water jacket allows precise temperature control of its contents when operated with a recirculating water bath. The hose connectors accept 1/4 in (6.35 mm) ID tubing. This unit is made from Wheaton 33 low extractable borosilicate glass that conforms to USP Type I and…
-
With barrel-shaped Standard Taper glass stopper Calibrated to contain at 20°C
-
Airless-Ware Kjeldahl Schlenk Flasks
DWK Life Sciences (Kimble)With a unique design for the manipulation of air-sensitive and moisture-sensitive compounds Features a modified Kjeldahl shape that facilitates heating, stirring and solvent stripping without impairing ease of liquid and solid transfer The bottom of the flask is shaped to fit Kontes oil…
-
PYREX® Media Storage Bottles
CorningHeavy-duty media bottle can be used for storage as well as mixing and sampling. Includes linerless, one-piece autoclavable polypropylene plug seal cap with drip free pouring rings. Optional red PBT caps and red ETFE pouring rings are available for dry heat sterilization (180°C). New glass…
-
Specially designed for use in low tissue culture hoods or other confined enclosures The 1, 5 and 10 mL sizes of these pipets are almost 3” shorter than comparable disposable serological pipets The 25 mL size is 5” shorter than most comparable reusable pipets All sizes have…
-
Glass Beaker, Low Form
United Scientific SuppliesOur beakers are made from low-expansion borosilicate glass. Beakers feature heavy and uniform wall thickness, spouts designed for easy pouring, and beaded tops. The 20ml and larger sizes also have white printed graduations and a marking area. Tolerance for beakers is approximately +- 5%.
-
Fused, fritted glass disc Polished ends Pore size: coarse, 40-60 µm, medium, 10-15 µm, fine 4-5.5 µm 30 mL disc diameter: 30 mm; fits tube i.d. 36 mm, 50 mL disc diameter: 40 mm; fits tube i.d. 42 mm.
-
FORTUNA® Optima glass syringes
MilliporeSigma•Interchangeable barrels and plungers •Flanges flat on two sides to prevent syringe rolling •Colored ring on plunger ends for easy volume measurement •Conformity certified by H markGlass Luer - standard Luer hubLuer lock - metal Luer lock tip on glass syringe, easy twist locks Luer needle onto…
-
Serological Pipets, Shorty Glass Pipets
DWK Life Sciences (Kimble)Ideal for use in tissue culture work and other procedures performed under a fume hood or in other confined areas Calibrated to deliver with blow-out Reverse and negative calibrations Sterile Plugged Disposable serological pipets are packaged in color-coded, paper/plastic…
-
Double Sidearm Celstir® Spinner Flasks
DWK Life Sciences (Wheaton)With Cell Suspension Stirrer, Celstir® Entire flask assembly can be autoclaved Offered in six sizes, working capacities 25 to 1,000 mL Easy access through side arms Of Wheaton “200” borosilicate glass Cylindrical with screw neck and polypropylene cap …
-
PYREX® Griffin Low-Form Beakers
CorningUniform wall thickness Large marking spot Spout Standard Griffin Beakers with spout, manufactured with uniform wall thickness, offer optimum balance between thermal shock resistance and mechanical strength. For convenience, the 250 through 4000 mL beakers have a double graduated…
-