Media Bottles

…is autoclavable, universally interchangeable with all bottles in series. Bottles include clear pour ring for easy, drip-free dispensing and linerless, autoclavable blue polypropylene cap. An assortment of popularly sized media bottles from our 14395 series, which is ideal for general laboratory…

Corning® Nu-Serum™ IV Growth Medium Supplement is a low-protein alternative to newborn calf, fetal bovine, and other sera routinely used for cell culture. Replaces fetal bovine and other sera on an equivalent volume basis. Quality Tested at a concentration of 10%…

Corning® Nu-Serum™ Growth Medium Supplement provides a low-protein alternative to newborn calf, fetal bovine, and other sera routinely used for cell culture. Replaces fetal bovine and other sera on an equivalent volume basis. Quality Tested at a concentration of…

Heavy-duty media bottle can be used for storage as well as mixing and sampling. Includes linerless, one-piece autoclavable polypropylene plug seal cap with drip free pouring rings. Optional red PBT caps and red ETFE pouring rings are available for dry heat sterilization (180°C).  New glass…

…prevent pH changes 45mm screw thread, wide mouth finish Graduated with writing patch Special pour lip facilitates easy pouring Bottles, caps and pour rings are autoclavable Manufactured from USP Type I borosilicate glass Cap has a built-in wedge shaped sealing ring, eliminating…

…culture media, serum, and buffers. The polystyrene bottles are optically clear, have low extractable substances and have good alcohol compatibility. They are available radiation sterilized and are an ideal choice for storage of liquids used in tissue culture. Each Autofil™ bottle has…

…resistance. Square bottles are easy to handle, take up less space (13-20%) on the shelf or autoclave and are ideal for mixing, sampling and storage. Features include white enamel graduations, large marking spot and a molded-in glass ring to indicate full capacity. Bottle includes one-piece…

…materials, amber media / solutions bottles are autoclavable, with permanent white imprinted graduations and marking spots. The supplied GL 45 cap is liner-less and both the cap and drip free ring are polypropylene and autoclavable to 140°C. Maximum use temperature of bottles is 450°C.

… Large area for bottle marking/identification Autoclavable, reusable and breakage resistant Five cap colors hybex™ reusable media bottles are manufactured from high quality, borosilicate 3.3 glass. With their superior chemical resistance, these bottles are ideal for storage…

Caps fit Corning media bottles, Erlenmeyer flasks and spinner flasks with standard GL threads. Standard Plug Seal Caps are autoclavable and use a linerless plug seal design for efficient sealing. Pouring Rings fit on the lips of bottles for drip-free pouring. Autoclavable Vented Caps…

…labels. Bottle Tags The colorful silicone GL 45 Bottle Tags can be easily and securely attached around the neck of the YOUTILITY bottle. The Bottle Tags are available in several distinct colors for easy customization and unambiguous bottle identification. The elastic Bottle Tags will fit…

Suitable for mixing and storage of culture media Borosilicate glass has a low-alkali content helping to prevent changes of pH and maintain purity of contents Easy-pour lip with graduation lines indicating approximate volumes Supplied with deep-form rubber-lined caps. 1742E62…

These borosilicate glass, general purpose media bottles are autoclavable with permanent white imprinted graduations and marking spots. The screw thread opening has an ID of approximately 30mm. The supplied cap is liner-less and both the cap and drip free ring are polypropylene autoclavable to 140…

…polyethylene (HDPE) with supplied polypropylene (PP) caps Screwcaps feature non-stick feature and open and close in less than 1-1/2 turns Heavy duty and extremely durable Ideal for a wide range of liquid storage, media preparation and sampling applications Good chemical resistance

Plastisol coating for safety USP Type I clear borosilicate glass Provided with graduations and writing patch 33-430 screw cap can be purchased separately Autoclavable

Space-saving, square shaped borosilicate glass, general purpose media bottles are autoclavable with permanent white imprinted graduations and marking spots. The screw thread opening has an I.D. of approximately 30mm. The supplied GL 45 cap is liner-less and both the cap and drip free ring are…

…bottles Wide opening for easy access Polypropylene pour rings included The RAY-SORB® process provides a shield to protect light sensitive products. Less than 1% transmission below 400 nm and reduced (5%) from 400-600 nm as compared to untreated, clear, borosilicate glass. Bottles…

With attached polypropylene cap and pour ring USP Type I Borosilicate bottles Bottle, cap and pour ring are autoclavable Writing area and printed graduations 45 mm screw thread finish Wide mouth eliminates fluid surge during pouring. Stopping shoulders allow for easy…

The Vacuum Bottle Trap is a useful tool for easy and continuous liquid aspiration with vacuum when aspirating tissue culture media, wash solutions, supernatant fluids after centrifugation, chemical waste, etc. The Aspirator Bottle safely retains up to 1600 mL (54 oz) of fluids while the…

…been designed to support the DHFR selection/amplification system. This protein-free media has been successfully tested in a variety of culture systems including T-flasks, spinner and shaker flasks, roller bottles, and bioreactors. Highlights: Supports the DHFR selection/amplification…

Polycarbonate media bottles with PP closure are unequaled in design or performance. The octagonal square shape provides and "Easy-Grip" for pouring. Transparent and autoclavable. Perhaps the best design of any plastic lab bottle. Use with aqueous solutions, storage of media- short term or…

Nalge 2015 series Leakproof, autoclavable and reusable with temperature  range -135° to 135°C (-211° to 275°F) Polypropylene cap; square design allows maximizing storage space Graduated

Duran borosilicate glass, GL thread, lab bottles with graduations, retrace codes, red polybutylene terepthalate (PBT), PTFE lined caps. Red PBT pour rings to match caps or Blue Polypropylene caps and rings, or without caps and pour rings. Available in plain, safety coated, amber or netted pressure…

Provide excellent gas barrier properties for storage and shipping of liquid media, buffers and sera with Thermo Scientific™ Nalgene™ Square PET Media Bottles with Closures. These light-weight bottles are shatter-resistant, sterile and come in a space-saving square design. Features:…

Polyethylene terephthalate (PET) bottles are ideal for storage and sampling of media, biologicals, and other aqueous solutions PET resin makes the bottle lightweight and as transparent as glass Break-resistant bottles are an ergonomic and easy-to-handle alternative to glass Leakproof,…

…round bottles can be used for storage as well as mixing and sampling. They include an autoclavable red polybutylene terephthalate (PBT) GL45 threaded cap with PTFE faced silicone liner and ETFE pouring ring for dry heat sterilization (180°C). New glass bead indicates full capacity line. Bottles…

Chemically resistant and stable laboratory bottles, fabricated from borosilicate glass and safety coated for protection against mechanical damage and to prevent leakage of contents should the glass break. Supplied graduated with red plastic cap and removable pouring ring that allows drip-free…

Media Bottles are ideal for media prep and storage of laboratory reagents and biological buffers For use in stem cell, mammalian and bacterial culture applications Square design saves valuable shelf space Manufactured from medical grade virgin PETG which reduces gas permeability Flat…

KimCote® plastic-coated bottle has enhanced graduations and marking spot is permanent white enamel. This general use bottle is provided with a wide opening (approx. 30 mm ID) GL 45 screw thread and is supplied with linerless autoclavable (121 ºC max) polypropylene blue cap. Bottle design includes a…

NALGENE PETG square media bottles are specifically designed for packaging and shipping liquid medias, buffers and sera. These heavy-walled, durable, square PETG bottles save space, are shatter-resistant and provide excellent gas barrier properties. These sterile, non-pyrogenic bottles save you time…

TriForest Square / Octagonal PETG ergonomic media bottles are ideal for storage of media, laboratory reagents, and biological buffers. Bottles are radiation sterilized and come standard with a patented tamper evident closure system. They are also available with a standard cap. Graduation markings…