Glass, Bottles
Benchmark BenchPress 2024 - Promos & Lab Favorites
Shakers, Incubators, Centrifuges, Balances, Rotators,
Vortexers, Dry Baths, Rockers and MORE!
Download the promotional brochure below learn more.
Benchmark BenchPress 2024 Promotional Brochure
Offers expire July 31, 2024
-
Gay-Lussac With capillary glass stopper ground to flat-sided point for take-off of overflow 10 mL and 25 mL sizes are for ASTM Standard D 369 and Barrett test H-8; AASHTO standard T-74 *min order of 10 each
-
PYREX Low Weighing Bottles
CorningShort length Standard Taper joints Capacities from 35 to 82 mL These PYREX low form weighing bottles have a Standard Taperjoint style opening that accepts a closed bottom, hollow pennyhead style stopper.
-
FORTUNA® Optima glass syringes
MilliporeSigma•Interchangeable barrels and plungers •Flanges flat on two sides to prevent syringe rolling •Colored ring on plunger ends for easy volume measurement •Conformity certified by H markGlass Luer - standard Luer hubLuer lock - metal Luer lock tip on glass syringe, easy twist locks Luer needle onto…
-
300 mL BOD Bottles with Pennyhead Stoppers
DWK Life Sciences (Wheaton)BOD bottles are suitable for incubating diluted samples of sewage, sewage effluents, polluted waters, and industrial wastes to determine the amount of oxygen required during the stabilization of the decomposable organic matter by aerobic biochemical action. These 300 mL capacity bottles are…
-
60 mL BOD Bottles with Glass Pennyhead or Robotic Stoppers
DWK Life Sciences (Wheaton)BOD bottles are suitable for incubating diluted samples of sewage, sewage effluents, polluted waters, and industrial wastes to determine the amount of oxygen required during the stabilization of the decomposable organic matter by aerobic biochemical action. BOD bottles have a specially designed…
-
Glass Stoppered Bottles
CorningNarrow mouth PYREX® with glass stopper With ground neck With ground glass stoppers 125 mL and 250 mL bottles are furnished with a number 19 Standard Taper stopper; 500 mL bottles are furnished with a number 24 Standard Taper stopper; 1,000 mL and 2,000 mL bottles are…
-
Sterile, disposable, cotton-plugged, individually wrapped, shorty, PYREX® glass Same pipets as 7536N10 series, but individually wrapped in Corning Steri-View™ pouch Color-coded
-
PYREX Tall Weighing Bottles
CorningShort length Standard Taper joints Capacities from 7 to 85 mL These PYREX tall form weighing bottles have a Standard Taperjoint style opening that accepts a closed bottom, hollow pennyhead style stopper.
-
Glass Pennyhead Stopper, Standard Taper 24/40
DWK Life Sciences (Kimble)Hollow plug type With sealed bottom and vertical penny head
-
Two Liter B.O.D. Bottle
DWK Life Sciences (Wheaton)Large capacity With glass Robotic stopper This 2 liter BOD bottle is recommended for long-term BOD and ultimate BOD analysis. This bottle is manufactured from Wheaton 33 low extractable borosilicate glass that conforms to USP Type I and also ASTM E-438 Type I, Class A requirements…
-
Clear French Square Glass Bottles With Black Phenolic Cap with Poly-Seal Liner
DWK Life Sciences (Wheaton)With attached screw caps Ideal for field or general laboratory use
-
Clear Glass French Square Bottles
DWK Life Sciences (Kimble)Clear glass allows for easy viewing of contents Wide mouth design makes it easy to add or remove contents Square shape bottle maximize shelf storage space Type III soda-lime glass Six capacities: 0.5, 1, 2, 4, 8 and 16 ounces Choice of six liner styles
-
300 mL BOD Bottles with Robotic Stoppers
DWK Life Sciences (Wheaton)BOD bottles are suitable for incubating diluted samples of sewage, sewage effluents, polluted waters, and industrial wastes to determine the amount of oxygen required during the stabilization of the decomposable organic matter by aerobic biochemical action. These 300 mL capacity bottles are…
-
Pycnometer, 10 mL
DWK Life Sciences (Kimble)Thermometer with Standard Taper No. 10/18 ground joint serves as stopper Side arm is fitted with vented 5/12 cap Thermometer range 14° to 37°C in 0.2° divisions; tolerance ±0.2°C Capacities are within 10% of nominal capacities etched on flask 50 mL…
-
HTC PAL Liquid Injection Vials and Caps
Agilent TechnologiesAgilent provides a wide variety of vials and cap compatible with the HTC LC Injector listed in the Vials and Caps section. CTC recommends using Silicone/PTFE and PTFE/Silicone/PTFE septa for purity and penetration properties. Below are featured the most popular vials and caps used with the HTC. …
-
Cap Only 410-18
CorningThese standard 18-410 G.P.I. thread screw caps are replacement caps for the No. 5650 PYREX® volumetric flasks. Caps have a durable cone-shaped polyethylene liner Poly-seal cap insures a leak-resistant closure and no contamination when working with most common reagents
-
Serological Pipets, Shorty Glass Pipets
DWK Life Sciences (Kimble)Ideal for use in tissue culture work and other procedures performed under a fume hood or in other confined areas Calibrated to deliver with blow-out Reverse and negative calibrations Sterile Plugged Disposable serological pipets are packaged in color-coded, paper/plastic…
-
Pyrex® sterile multi-pack Designed for the larger volume user, these pipets are calibrated "to deliver" and are packed to permit easy access to several pipets at a time without contaminating the entire case Multi-packed plastic bags to ensure sterility Cotton-plugged …
-
Calibrated "to deliver" Large tip opening to allow more rapid intake and delivery of suspensions and viscous materials Color-coded by size for easy identification and sorting Accu-Red graduations are permanently fused into the glass Two rings at the top indicate the pipet…
-
Clear / Flint French Square Bottles provide maximum content visibility. The space saving design saves on shelf and storage space. The wide mouth opening is ideal for mixing, storing and sampling. Attached black thermoset (phenolic) caps with solid PE liners offer good chemical resistance and low…
-
Sub Surface Grab Sampler® II
DWK Life Sciences (Wheaton)Excellent for accessing fluid flow in deep manholes and hard to reach sub-surface sampling areas Helps meet EPA requirements for water and waste water sampling Available in lengths up to 18’ (5.5m) Each sampler consists of an inert polypropylene head with stainless steel fittings and an…
-
Disposable, sterile, PYREX® individually wrapped Calibrated "to deliver" Has negative graduations and fire-polished tips for burr-free, even flow rates Individually wrapped in Steri-View™ wrapping (one side paper, one side plastic) for easier identification and opening
-
For use with viscous fluids, semi-solid bitumens, emulsions, etc. For ASTM Standards D 70, D 115, D 234, and D 1963; also for AASHTO standards T-43, T-151, and M-125; and ANSI Methods A37.71 and K34.1 Standard taper 24/12 solid stopper, concave on the under side, with central opening 1.6 mm bore …
-
PYREX Dropping Bottles
CorningRecommended for use in preventing contamination by solubility or pH change With dropping bulb and pipet, Standard Taperground-glass stopper Stopper for 30 mL size is not standard Standard Taper. IMPORTANT: stopper is not covered by Standard Taperspecifications, but ground to…
-
Clear / Flint French Square Bottles provide maximum content visibility. The space saving design saves on shelf and storage space. The wide mouth opening is ideal for mixing, storing and sampling. Attached black phenolic (thermoset) rubber lined caps are autoclavable. The Liner is compliant with…
-
Contaminants such as loose dirt, carton lint, aerosols, and fine glass particles are removed by the Vacuum and Ionization process. V & I Cleaning Process: Compressed air passes through a condensate separator and coalescing filter to remove aerosols and fine dust particles. Next, the air passes…
-
Aspirator Bottles
DWK Life Sciences (Kimble)With white enamel marking spot Glass conforms to ASTM E438, Type 1, Class A Sizes 250 and 500 mL accept 5/16" I.D. flexible tubing, 1000 mL and larger accept 3/8: I.D. tubing. Kimax glass hose connection outlet is fused to the bottle. 250 mL bottle takes size 2 rubber stopper; 500 mL…
-
Bottle Weighing Tall Plug 30 X 60mm Cs18
DWK Life Sciences (Kimble)KIMAX bottle with a plug-style, closed bottom stopper that fits into an internally ground body. Designed from Federal Specification NNN-B-1493, Type I, Style I requirements Plug-style glass stopper with a closed base fits into the neck of the bottle and seals it to secure contents and…
-
Bottle Comp 350 C
CorningThese 350mL PYREX® gas washing bottles provide an inexpensive but effective method for washing and drying gases. Sidearm tubulations are 10mm O.D. The side inlet tube on this bottle has a rod sealed to the bottle near the top for extra strength. A 24/40 Standard Taper stopper is used to seal…
-
PYREX Gas Washing Bottles
CorningPYREX® Brand Drechsel Standard Taper stopper incorporates a plain dip tube as the distributor Large hexagonal base for stability Standard Taper stopper size 29/42
-
Wide Mouth Clear French Square Bottles provide maximum content visibility, space saving design saves on shelf and storage space. Wide mouth opening is ideal for mixing, storing, and sampling. Phenolic Solid PE Lined Cap.
-
BOD Bottle Accessories
DWK Life Sciences (Wheaton)BOD Bottle Racks are constructed of coated wire. 1215X63 is holds up to twenty 60 mL BOD Bottles and 1220C96 hold up to twelve 300 mL BOD Bottles. Rubber Leash For BOD Stopper (1234R64) ensures that the stoppers do not become lost when collecting samples in from the field. The 10 mm diameter…