Polypropylene, Bottles
-
Sol-M® Syringe without Needle
Sol-MillenniumSol-M 3-Piece Syringes accurately measure liquid medications and are available in a wide range of sizes. Sterile, and Individually wrapped in blister packaging. High-transparency barrel to easily visualize contents. Silicone lubrication ensures smooth plunger movement. …
-
MCT/PCR Rack
SP Bel-ArtPerfect for benchtop use or freezer storage, this compact, double-sided polypropylene rack accommodates 0.2ml thin-walled PCR tubes on one side while the opposite side holds 1.5ml to 2.0ml microcentrifuge tubes. 80 wells on each side keep tubes upright in a 5 x 16 array and are numbered for …
-
Polypropylene Utility Trays
Thermo Scientific NalgeneUsed to carry test tube racks, blood bags, saline bags, etc. Autoclavable Excellent for use in clean room environment where everything needs to be sterilized Molded-in center division with handle; overall L 14 7/8” x W 9 1/2” x H 4 1/2”. Meets OSHA Standard 29 CFR Part…
-
Autoclavable Rows are numbered and lettered Base plate has rounded wells with drain holes. Molded cutouts in end panels form handles. 9259L10 and L20 are 213 x 110 x 111 mm high; 9259L30 through L50 are 213 x 110 x 127 mm high.
-
Heavy Duty Vacuum Bottles
Thermo Scientific NalgeneThick-walled polypropylene Nalge 2126 Wide mouth Polypropylene bottle and closure TPE gasket for leakproof vacuum Sizes range from 1 to 5 liters Durable bottle for extra-rugged service. Polypropylene bottle with white polypropylene closure and TPE gasket provide…
-
Scienceware® Microtube Rack
SP Bel-ArtRound-holed Stackable, autoclavable White, polypropylene rack takes 72 centrifuge tubes in 6 rows of 12. Molded cutouts in end panels form handles. 2591C58 and C60 hold 400-500 µL tubes and are 9” L x 4 3/8” W x 4 3/8” H. 2591C62 and C64 hold 1.5 mL tubes and are…
-
Multi-Use Universal Vial Rack™ System
J.G. FinneranIncreased spacing allows the user to pipet samples or attach caps without removing the vials from the rack. Available 5 per case.
-
Dispenser packs of non-sterile syringes make sense. They're more economical and easier on the environment. Available in both luer slip and luer lock styles. Convenient dispenser cartons Reduced waste No wrappers to remove Require less storage space These all polypropylene…
-
No-Wire Test Tube Grip Racks
SP Bel-ArtTest Tubes ‘Hang in There’ in Any Position, Even Inverted! Retainer fingers hold tubes firmly in the rack plates with no fear of dislodging, making them perfect for both decanting and water bath work. • Fingers allow simultaneous decanting to save valuable…
-
Reversible With lids Designed to hold 0.2 mL 8-strip PCR tubes as well as 0.5, 1.5 or 2.5 mL reagent vials on one side, this reversible rack is for any researcher using strip tubes for PCR. When using only 0.5 mL tubes, flip the rack over for 96 alphanumeric labeled 0.5 mL wells for easy…
-
Open-Top Polypropylene Screw Thread Closures with Red
Chase ScientificConvenient assembly of caps and liners Available with standard or pre-slit septa Autoclavable and used for multiple injections
-
Interlocking 20-Place Tube Racks
Heathrow ScientificAttach several racks for large experiments Heavy polypropylene construction Glove friendly Hold 1.5/2.0 mL tubes Racks slide together on both sides. Internal ribbing make racks stable and sturdy. The “Hold-It” finger slot on the front of the racks allows racks to…
-
15-415 Dropper Tip Caps
DWK Life Sciences (Wheaton)Screw cap made of radiation grade polypropylene Variety of colors Packaged in a case of 100 or 1000
-
Closure 15-415 0
DWK Life Sciences (Kimble)Closed top, linerless screw thread caps. Made of Polypropylene Economical, one-piece construction Unique design provides exceptional sealing properties Color: Natural GPI finish: 15-415 Autoclavable
-
Scienceware® Floating Cryotube Rack
SP Bel-ArtPolypropylene Autoclavable 20 places Rack accepts 12mm tubes Rack can be used for holding cryotubes during work or incubation. It floats in water and can be used for quickly thawing frozen cells in a water bath. Rack has handle for easy handling. The filled rack unloads easily by…
-
The 4-Way Flipper benchtop storage system combines four racks in one. Designed to support a variety of tube sizes and styles, each rack can be rotated to any of the four sides to support different size centrifuge tubes. Their rugged polypropylene construction allows them to be autoclaved, placed in…
-
Unwire Polypropylene Test Tube Racks
Thermo Scientific NalgeneReady-to-use No assembly required Provides an unrestricted view of tubes Available in 2 sizes: 13 and 16 mm and four colors: white, blue, green and red. Do not autoclave.
-
Polypropylene Racks for 12mm and 16mm OD Vials
DWK Life Sciences (Kimble)Disposable polypropylene vial rack Lettered and numbered for indexing individual tubes Corners interlock for convenient stacking
-
Bulk White Closures
I-ChemLDPE foam-lined white polypropylene cap Bottles sold separately: 013-series and 012-series Recommended for general purpose sampling where cleaning and certification is not required, or ready for your own cleaning and certification procedures Economically bulk packed Includes:…
-
Microcentrifuge Tube Racks
Caplugs Evergreen®Microcentrifuge tube racks are reversible 96-well racks that hold tubes in an 8 × 12 format. One side of the reversible rack holds 96 1.5 mL, 1.8 mL or 2.0 mL microcentrifuge tubes while the other side holds 96 0.5 mL tubes. Autoclavable racks are alpha-numerically…
-
Replacement closed-top polypropylene closures and PTFE liners are sold separately and unassembled except for 1709B73, which is a 24-414 size that comes with a bonded-in PTFE-lined silicone liner.
-
50 Position Vial Rack
DWK Life Sciences (Wheaton)50 Position rack 12.5 mm Open ID sized vials Racks are manufactured from polypropylene and can be easily cleaned in an automatic washer or autoclaved. The racks are sturdy and can be stacked, even when the vials are in place. Each well has an opening in the bottom to facilitate drainage.…
-
CryoSure® & MST™ Vial Processing Racks
Caplugs Evergreen®Racks are designed for our CryoSure® vials & MST™ tubes, holding up to fifty vials/tubes in alpha-numerically labeled holes. The racks are autoclavable and stackable. Tubes and vials sold separately.
-
Polypropylene Test Tube Racks
BrandTech®Polypropylene racks snap together for easy assembly, sturdy construction, stackable, and are available in four colors. Will not float in waterbath. Alphanumerical positions for clear sample identification. Wide spaces between positions. Operating temperature -20 to 90°C. Autoclavable at 121°C.
-
ThermalSeal® A™ Sealing Films for PCR and Storage
Excel ScientificThermalSeal® A™ sealing films are an advanced version of Excel Scientific's classic ThermalSeal® sealing films for PCR. ThermalSeal A films consist of 50 µm polyester film with a 41 µm layer of acrylic adhesive formulated for improved protection against…
-
Scienceware® Round Bottom Flask Support
SP Bel-ArtRound-bottom flasks of any size up to 10 liters are cradled securely in the stepped concentric rings of this holder. Can be stacked together for convenient storage Polypropylene plastic rack; not affected by spilled acids, alkalis or other corrosive liquids Steam autoclavable at…
-
Constructed of a special blend of polypropylene, these autoclavable racks will sink in a water bath Interlocking feet allow racks to be stacked while not in use Racks feature end plates for labeling. Rows are numbered and lettered for tube identification. Outside dimensions: 9.7” x…
-
Closure 18-415 0
DWK Life Sciences (Kimble)Closure of one-piece construction with a seal achieved due to a unique inner sealing ring. Intended for use with 73750, 73760 and 73770 disposable culture tubes and 73785 disposable centrifuge tubes. Natural polypropylene Autoclavable Designed from ASTM Specification E982
-
Blue Threaded Luer Lock Hub; 22 gauge 1.25 inch High Precision Taper Tip- id inch:0.017(0.420mm) polypropylene plastic threaded tapered dispensing tip.
-
The Flipper microtube rack is designed to hold either 96 0.5 mL or 96 1.5/2.0 mL style microcentrifuge tubes. Rack is reversible with one side suitable for larger tubes and the other side for smaller tubes. The Flipper is fitted with a clear polypropylene lid and both sides are labeled in…
-
Unwire Polypropylene Test Tube Peg Racks
Thermo Scientific NalgeneAutoclavable Consists of an array of pegs spaced to hold tubes while allowing full view of contents Pegs convenient for holding inverted tubes for drying When racks are inverted, ribs keep tubes off base to allow drainage through holes 9260B01 and B13 are 13 mm with an array of 8 x…