Dropping Bottle

Compare Tool

Select up to 3 products

Dropping Bottle
1 - 32 of 113
  • PYREX Dropping Bottles


    Recommended for use in preventing contamination by solubility or pH change With dropping bulb and pipet, Standard Taperground-glass stopper Stopper for 30 mL size is not standard Standard Taper. IMPORTANT: stopper is not covered by Standard Taperspecifications, but ground to an…

  • Dropping Bottles

    DWK Life Sciences (Wheaton)

    Bottle made of low density polyethylene Manufactured to strict quality control standards to ensure the best product for your application Available in 1, 3, 6, 7, 10, 15, 30, 60, or 120mL Packaged in cases of 100 or 1000 Dropper tip caps and tips sold separately

  • Dropping Bottle Closures

    DWK Life Sciences (Wheaton)

    CLEARANCE SALE! Original Price: $ 406.27 WHEATON dropper tip caps are available in radiation grade polypropylene in a variety of colors. * Sale price valid only on current stock. Additional units may be available for purchase at original price. Sales are on a first…

  • Clear Dropping Bottles with Standard Taper Pipet

    DWK Life Sciences (Kimble)

    The dropper bottle is designed for general purpose use and for determining the oil absorption of pigments (ASTM D281). Provided with a medium length Standard Taper pipet dropper and a rubber nipple The 30 and 60 mL sizes are designed from Federal Specification A-A-5134 requirements The…

  • Percoll

    GE Healthcare

    …a mixing of the bottle before use. Preformed gradients can be stored for weeks without a change in gradient shape, provided that the gradient remains unfrozen. Percoll can be buffered within the pH range 5.5 to 10.0 without any changes in properties. If the pH is dropped below 5.5, gelling…

  • Dropping Bottle, Barnes

    DWK Life Sciences (Wheaton)

    Wheaton 400 borosilicate glass Size: 30 mL Autoclavable Average drop size: 46 µL Lower portion of the included rubber bulb forms a tightly fitting stopper. Glass meets USP Type I standards. Dimensions: 35 mm cross section x 70 mm height. Please note: Replacement droppers…

  • Labware Dropper Bottles

    Thermo Scientific Nalgene

    bottle and dispensing tip permit easy content identification and the colored closures permit easy reagent identification, while the white dispensing bottles are ideal for UV light-sensitive products. Available in three convenient sizes. Dropper control tip snaps into place for a secure fit. Drops

  • Dropping Bottles in Vial File®

    DWK Life Sciences (Wheaton)

    Contains 40 - 3mL LDPE (Low Density Polyethylene) bottles Assembled with dropper tip and cap attached to bottle Average drop size is 44uL +/- 6uL Packaged in a reusable plastic case Extended controlled dropper tip dispenses one drop at a time Alphanumerical indexing of contents…

  • Dropping Bottle, Long Spout, Low-Density Polyethylene


    An ideal bottle  for water and oils as there are no shoulders to restrict  flow. They are graduated and can be used as rough measures. Molded in area for tag to allow for easy identification. Conforms to DlN 13316 and 168.

  • Amber Dropping Bottles

    DWK Life Sciences (Kimble)

    Designed to protect contents from UV rays and ideal for light-sensitive products. Supplied with 20-400 GPI screw cap, bulb and plastic or glass dropper assembled on the bottle Manufactured from soda-lime glass conforming to USP Type III and ASTM E438, Type II requirements

  • Squeeze Type Dispensing Bottles


    bottles and spouts come with sealer caps Spout openings standard .030 inches, can be enlarged by cutting with scissors Sealer snaps on easily after using and gives tight seal 15 mL bottles are furnished with size 15 caps; 30 and 60 ml bottles with size 18 caps; 120, 180 and 240 ml bottles with…

  • Droppers With Screw Cap

    Glass pipet with rubber bulb For use with bottles listed below or with bottles having similar dimensions

  • Bottles, Dropping Polytetrafluoroethylene


    Heavy wall, wide mouth Polytetrafluoroethylene screws closure with machine finish for ease in cleaning. Virtually immune to chemical attack, only attacked by some fluorine containing compounds at high temperature and molten alkalis metals. Working temperature range is from cryogenic to 260°C.…

  • Drop-Dispenser Bottles

    Thermo Scientific Nalgene

    Always dispense just one drop at a time Nalge 2411 Of low-density polyethylene Captive spout in center of screw cap with closure Leakproof

  • Glass Dropping Bottles

    DWK Life Sciences (Wheaton)

    Clear or amber with channeled glass stopper Clear glass bottles are of borosilicate glass; amber bottles are flint glass Available in 50 mL and 100 mL sizes Glass bottles with projecting lug on flat, channeled glass stopper deliver contents drop by drop.

  • Natural Dropping Bottles with Tip & Cap

    DWK Life Sciences (Wheaton)

    Bottle made of LDPE (Low Density Polyethylene) Tip dispenses a stream of liquid or non-controlled drop Bottle is not autoclavable Dropper bottles, tips and caps are packaged separately

  • Scienceware® Dispensing/Drop Bottles

    Bel-Art Products

    Low-density polyethylene Cap snaps on easily and continues to hold a tight seal even after repeated use Tip opening is 0.76mm (0.030")

  • Phosphate Standard Solution, 500 mg/L as (NIST)


    Phosphate Standard Solution, 500 mg/L, 100 mL Marked Dropping Bottle.

  • Bottles, Low Density Bellows Dropping


    These low density polyethylene bottles are supplied with a bellow-type dropping pipette. Pipettes are graduated for nominal indication of amount of liquid being drawn. Bellows-shaped bulb makes use easy and provides excellent drop formation.

  • Dropping Bottles with Tips and Caps

    DWK Life Sciences (Wheaton)

    Bottle made of LDPE (Low Density Polyethylene) Extended controlled dropper tip dispenses one drop at a time Average drop is 44µL ±6µL Radiation grade polypropylene screw caps and tips packaged separately Dropping bottles, natural tips, and white caps are packaged…

  • Dropping Bottles, LDPE


    Dropping bottles made of low-density polyethylene (LDPE) with screw-on dropper cap.

  • 15mm Extended Controlled Dropper Tips

    DWK Life Sciences (Wheaton)

    Tip made of LDPE (Low Density Polyethylene) Extended controlled dropper tip dispenses one drop at a time Average drop size is 44uL

  • Scienceware® Acid Pump / Reagent Dispenser

    Bel-Art Products

    bottles with GPS No. 38-430 or 38-400 threads This dispenser fits many 2.5 & 4 liters, 5 pint (80 fl. Oz), ½ gallon & 1-gallon jugs and bottles. To use, squeeze the smaller bottle and depress the top button to immediately stop dispensing. Use the two included adapters for short neck bottles.

  • Scienceware® Measure-Matic™ Dispenser

    Bel-Art Products

    …By Squeezing the Bottle Squeezing forces the desired volume of liquid through the tube and into the cup. When pressure is released, excess fluid returns into the bottle for spill free pouring. Measure liquids from 5ml to 25ml just by squeezing the bottle Polypropylene dispensing…

  • Teflon™ FEP Drop-Dispensing Bottles

    Thermo Scientific Nalgene

    …Nalgene™ Teflon™ FEP Drop-Dispensing Bottles, featuring excellent chemical resistance for dispensing virtually any chemical. Tethered spout cap snaps securely into place and won't pop off or leak when the closed bottle is squeezed. Usable over a wide temperature range…

  • Automatic Self Zeroing Titrating Burettes


    …with Category B (tolerances according to DIN ISO 385); no stopcock; exact dispensing via spring activated discharge jet or drop via micro screw; left or right hand operation for ease of use; sturdy & easily removable support stand; includes 500mL LDPE chemically resistent squeeze bottle.

  • One Drop Ind. 1.0-11.0

    Micro Essential

    … Each kit contains one(1) polyethylene dropper bottle with 24 ml. of pH indicator solution, one(1) capped 4 ml. sample tube, and a laminated color chart, packed in a polypropylene protective case. Product Directions : Place one drop of the indicator solution into 4 ml. of sample solution.…

  • Ethidium bromide dropper bottle


    …Ethidium Bromide solution in dropper form makes dispensing safer and convenient to use. Each drop contains about 25µg of Ethidium Bromide and is perfectly suited for a 50ml agarose gel. Simply add one drop of the Ethidium Bromide solution per 50ml gel solution (before gelation) and cast your…

  • Kartell Pump Dispensing Bottle


    Supplied with PP closure, this 500mL Pump Dispensing Bottle is highly suitable for dispensing liquids and creams. Wide surface area is easily labeled with contents. Pump Dispensing Bottle is suitable for food grade products. Dimensions: 3" diameter x 9" height

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.