Thermo Scientific Nalgene, Ready to Ship, Supplies
-
Nalgene™ Griffin Low-Form Beakers, PPCO
Thermo Scientific NalgeneNalgene beakers won’t chip, crack or shatter and can last for years. No sharp edges lurking in the dishpan. Great for general laboratory use, these beakers, with and without handles are strong and durable. Excellent compatibility with a wide range of chemicals Eliminate…
-
Autoclavable Ungraduated Round Bottom Centrifuge Tubes
Thermo Scientific Nalgene2602F40 is translucent Usable to 50,000 x g in refrigerated or non-refrigerated centrifuges *2610D22 and D30 with lip
-
Oak Ridge™ Centrifuge Tubes
Thermo Scientific NalgeneIdeal for high-speed centrifugation of aggressive chemicals. Excellent for chloroform and phenol extractions. Resists any acid, base or solvent. Autoclavable tubes withstand temperatures from -100°C to +150°C. For use in refrigerated and non-refrigerated centrifuges up to 50,000 x g. Before…
-
Conical Bottom Centrifuge Tubes
Thermo Scientific NalgenePolycarbonate open-top tubes have outstanding mechanical strength. Excellent for whole cell separations. For use up to 6,000 x g in refrigerated or non-refrigerated centrifuges. Translucent polypropylene copolymer has excellent chemical resistance. For low-speed centrifugation up to 6,000 x g. Both…
-
Polypropylene Buchner Funnels
Thermo Scientific NalgeneLightweight and durable Bottom and top can be separated for easier cleaning Autoclavable
-
Unwire Polypropylene Test Tube Racks
Thermo Scientific NalgeneReady-to-use No assembly required Provides an unrestricted view of tubes Available in 2 sizes: 13 and 16 mm and four colors: white, blue, green and red. Do not autoclave.
-
Mr. Frosty Cryo Freezing Container
Thermo Scientific NalgeneNalgene™ Mr. Frosty containers provide a simple-to-use system designed to achieve a rate of cooling very close to -1°C/minute, the optimal rate for cell preservations. Three sizes to accommodate volume range from 1-5mL Hold 12 to 18 tubes and has profile height of 86 or 151 mm…
-
Packaging Bottle, Wide Mouth - HDPE 4 oz / 125 ml 38-415
Thermo Scientific NalgeneThermo Scientific™ Nalgene Wide-Mouth Packaging Bottles. Made of high-density polyethylene with polypropylene closures are injection blow-molded for strength and uniform wall thickness. Durable, leakproof chemical resistant bottles designed for shipping and storage
-
Polymethylpentene Graduated Cylinders
Thermo Scientific NalgeneWith blue polypropylene base No meniscus, so reading is easier Non-wetting, deliver all contents (calibrated to contain/to deliver at 20°C) Autoclavable All sizes have generous pour spout Compatible with any chemical for typical brief use; can be chemically sterlized or autoclaved;…
-
Polypropylene Utility Trays
Thermo Scientific NalgeneUsed to carry test tube racks, blood bags, saline bags, etc. Autoclavable Excellent for use in clean room environment where everything needs to be sterilized Molded-in center division with handle; overall L 14 7/8” x W 9 1/2” x H 4 1/2”. Meets OSHA Standard 29 CFR Part…
-
MF75™ Series Bottle Top Filters
Thermo Scientific NalgeneNalgene filters have the Rapid-Flow multi-column membrane-support system. This proprietary system provides a uniform, consistent separation between touchpoints with the membrane, minimizing gap stress to maintain optimal flow. Polystyrene housing 90mm Supor®* machV PES membrane …
-
Nalgene Wide-Mouth Natural HDPE Bottles
Thermo Scientific NalgeneHDPE container with leak-proof polypropylene closure Leak-proof guaranteed Certified to meet EPA Performance Based Specifications for trace metal and water quality parameter analyses Caps assembled onto containers Wide mouth for easy filling and emptying Recommended for…
-
Polycarbonate Rectangular Carboys With Spigots
Thermo Scientific NalgeneNalge 2322 With polypropylene spigot and screw closure High-impact strength Leakproof Autoclavable Window-clear Sturdy handgrips Space-saving rectangular shape. All sizes feature molded-in graduations. Good for cold room use. Autoclave only when empty. Before autoclaving, set cap or…
-
Polypropylene Jugs
Thermo Scientific NalgeneNalge 2221 series Rigid bottles for smooth pouring Large molded handle accommodates gloved hand Excellent chemical resistance Autoclavable and leakproof Dimensions: 1 gallon jugs measure 11 3/4” high and take size 38-430 caps. 2 gallon jugs measure 15” high and take size 53B caps.…
-
Polyethylene Jerricans
Thermo Scientific NalgeneLightweight and chemically resistant Nalge 2240 series HDPE For storing, carrying, and dispensing liquids, handle and pouring spouts are integrally molded onto stable, rectangular container Spout sealed by captive leakproof polypropylene screw cap, size 53B Molded…
-
115 mL PS Filter Units
Thermo Scientific NalgeneLow-profile design; polystyrene Three membrane materials available: Cellulose Nitrate (CN), Surfactant Free Cellulose Acetate (SFCA) and Polyethersulfone (PES) Membrane diameter 50 mm with surface area 17.3 cm 2 Provide fast flow rates Graduations on upper and lower chambers, padless…
-
Round Floating Microtube Racks
Thermo Scientific NalgeneFor incubating in baths or vessels at elevated or reduced temperatures (-70° to +100°C) White, polypropylene racks that float, but suspend entire microtube in liquid Built-in handle and legs for easy handling in bath or on bench Autoclavable racks take 1.0, 1.2, 1.5 and 2.0 mL tubes. 2591C36…
-
Oak Ridge™ PSF Centrifuge Tubes
Thermo Scientific NalgeneStrong and tough like polycarbonate but much more acid- and base-resistant. Can be used up to 50,000 x g in refrigerated or non-refrigerated centrifuges. Before autoclaving, just set closure on top of the tube without engaging the threads. Must be filled to at least 80% of the total capacity.
-
Unwire Polypropylene Test Tube Racks with Handles
Thermo Scientific NalgeneNon-scratching Empty racks can be stacked Tube-centering depressions in bottom shelf are perforated. The hole rows have molded-in numbers and letters. Not autoclavable. All racks are 115 mm wide x 95 mm high.
-
Polyethylene Jugs
Thermo Scientific NalgeneSuitable for corrosive liquids Nalge 2220 series Low-density polyethylene jugs have polypropylene screw caps Neck is offset for easy and accurate pouring Large, molded handle accommodates gloved hand Leakproof Closure size for 1732M10 jug is 38-430 mm; dimensions are 11 3/4” high,…
-
Nalgene™ LDPE Buckets with Lids
Thermo Scientific NalgeneStore specimens in formalin and other preservatives with Thermo Scientific Nalgene LDPE Buckets with Lids, featuring air-tight lids meeting OSHA standards for storage of bloodborne pathogens. These low density polyethylene buckets are excellent for no-splash transport around the lab and are…
-
Plastic Utility Funnels
Thermo Scientific NalgeneReplace glass lab funnels with Thermo Scientific™ Nalgene™ Utility Funnels, which are an excellent shatter-proof alternative. 5207H70 and 5207H78 are made from shatter-proof, autoclavable polypropylene 5207H86 has a large throat opening for faster transfer of materials…
-
Safety Wash Bottles
Thermo Scientific NalgeneWith color closure Nalge 2422 Leakproof; 500 mL capacity Molded in translucent LDPE with polypropylene color closure
-
2009 Amber Rectangular Bottles
Thermo Scientific Nalgeneamber high-density polyethylene amber polypropylene screw closure These space-saving bottles help protect light-sensitive liquids or dry materials. NALGENE amber bottles comply with U.S. Pharmacopoeia 23, 661 requirements for maximum light transmission. Excellent chemical resistance to…
-
Square PETG Media Bottles with Closure: Nonsterile, Shrink-Wrapped Trays
Thermo Scientific NalgenePackage and ship liquid media, buffers and sera using Thermo Scientific™ Nalgene™ PETG Square Media Bottles with Closures. Heavy-walled, durable bottles offer excellent gas barrier properties and are specifically designed for storing media and sera. Heavy-walled and durable …
-
Hand Pumps
Thermo Scientific NalgeneCompact, lightweight, light duty hand pumps Useful for numerous small volume vacuum or pressure requirements in the laboratory or field Provides vacuum of 25 inches Hg (85 kPa) Pumping rates of 15 or 36 cc per stroke Pumps are molded of polyvinyl chloride, with finger grips in squeeze-type…
-
Polypropylene Mason Jars
Thermo Scientific NalgeneNalge 2115 Autoclavable leakproof With 70 mm neck which fits fixtures or closures having Mason jar threads, such as Osterizer blending assemblies. Molding ring in polypropylene cap seals against mouth of jar to prevent breakage.
-
PETG Square Media Bottles with Closures, Sterile
Thermo Scientific NalgeneNALGENE PETG square media bottles are specifically designed for packaging and shipping liquid medias, buffers and sera. These heavy-walled, durable, square PETG bottles save space, are shatter-resistant and provide excellent gas barrier properties. These sterile, non-pyrogenic bottles save you time…
-
Narrow Mouth Amber HDPE Lab Quality Bottles
Thermo Scientific NalgeneStore, ship and package light-sensitive liquid using Thermo Scientific™ Nalgene™ Narrow Mouth Amber HDPE Lab Quality Bottles. Featuring excellent chemical resistance to most acids, bases and alcohols, these high density polyethylene bottles are guaranteed leakproof. Features: …
-
Large, Round, High-Density Polyethylene Jars
Thermo Scientific NalgeneNalge 7142 jars with covers Chemical and temperature resistant Stackable, with easy-grip handles For storing and transporting dry and solid material, specimens and general lab supplies. Positive lock lids assure a tight seal. Capacity and o.d. x height given in listings.
-
Wide Mouth Translucent Amber HDPE Packaging Bottles
Thermo Scientific NalgeneProtect light-sensitive products with Thermo Scientific™ Nalgene™ Wide-Mouth Translucent Amber HDPE Packaging Bottles. These translucent, high-density polyethylene bottles meet USP requirements for light-resistant containers. Features: Translucent amber HDPE bottle with…
-
Polypropylene Lowboys With Spigots
Thermo Scientific NalgeneNalge 2324 Excellent chemical resistance Low profile design fits easily in tight spaces, on shelves or in refrigerators Leakproof Can be autoclaved repeatedly Polypropylene spigot and screw closure, size 63 mm; tubing same as 1753L30 series Dimensions: 8 liter Lowboys…