Nalgene Centrifuge Tubes

…and pelleting of a conical tube with the higher sealing capability of an Oak Ridge tube. Thermo Scientific™ Nalgene™ Conical Oak Ridge Graduated Polypropylene Centrifuge Tubes can spin up to 50,000 x g in a refrigerated or non-refrigerated centrifuge, conical tube adapter required. …

…Nalgene™ Oak Ridge Polysulfone Centrifuge Tubes, featuring an enhanced resistance to acids and bases. Features: Round bottoms fit high speed rotors Transparent, with straw-colored cast Can be used up to 50,000 x g in refrigerated or non-refrigerated centrifuges …

…Resists any acid, base or solvent. Autoclavable tubes withstand temperatures from -100°C to +150°C. For use in refrigerated and non-refrigerated centrifuges up to 50,000 x g. Before autoclaving, just set closure on top of the tube without engaging the threads. For proper performance…

2602F40 is translucent Usable to 50,000 x g in refrigerated or non-refrigerated centrifuges *2610D22 and D30 with lip

…than polycarbonate and can be autoclaved repeatedly. Contact-clear tubes allow easy view of contents. Can be used up to 50,000 x g in refrigerated and non-refrigerated centrifuges. Before autoclaving, just set closure on top of the tube without engaging the threads. Must be filled to at least 80% of…

…Scientific™ Nalgene™ High-Speed Round-Bottom PPCO Centrifuge Tubes, featuring uniform wall thickness and diameter. Tubes have excellent chemical resistance. Features Round bottoms that fit high-speed rotors in refrigerated or nonrefrigerated centrifuges Molding technique…

Strong and tough like polycarbonate but much more acid- and base-resistant. Can be used up to 50,000 x g in refrigerated or non-refrigerated centrifuges. Before autoclaving, just set closure on top of the tube without engaging the threads. Must be filled to at least 80% of the total capacity.

…and can be autoclaved repeatedly. Contact-clear tubes allow easy view of contents. Can be used up to 50,000 x g in refrigerated or non-refrigerated centrifuges with sealing cap closure option. Before autoclaving, just set closure on top of the tube without engaging the threads. Must be filled to at…

…Plastic Centrifuge Tubes from the centrifuge with a convenient pull tab. These autoclavable closures are designed to fit Nalgene™ round and conical centrifuge tubes. They may not be liquid-tight during high-speed centrifugation. 2602C55 stoppers fit non-lipped 50mL centrifuge tubes only.

…open-top tubes have outstanding mechanical strength. Excellent for whole cell separations. For use up to 6,000 x g in refrigerated or non-refrigerated centrifuges. Translucent polypropylene copolymer has excellent chemical resistance. For low-speed centrifugation up to 6,000 x g. Both tubes have…

…Nalgene High-Speed Round-Bottom Polypropylene Copolymer Tubes uniform wall thickness and diameter provides improved rotor fit and performance. Tubes have excellent chemical resistance. Designed with round bottoms to fit high speed rotors in refrigerated or non-refrigerated centrifuges …

Withstand up to 50,000 x g in refrigerated or non-refrigerated centrifuges. Before autoclaving, just set closure on top of the tube without engaging the threads. Must be filled to 80% of the total capacity. With polypropylene screw closure.

Withstand up to 50,000 x g in refrigerated or non-refrigerated centrifuges. With sealing cap closure option. Before autoclaving, just set closure on top of the tube without engaging the threads. Must be filled to at least 80% of the total capacity for proper performance. Polypropylene screw…

For high-speed centrifugation of aggressive chemicals Excellent for lipid and phenol extractions, as well as biomolecular applications using nucleic acids, proteins, and more Resists acids, bases or solvents Withstands temperatures from –100 to 150°C (–148 to 302°F) Withstands up to…

…store different buckets 4 liter capacity Centrifuge 5920 R accommodates standard 1 liter Nalgene ® bottles setting a new standard in the table top centrifuge segment. Compared to other custom-made 1 liter bottles the Nalgene bottle is narrow and allows for a better pellet compared…

…tubes up to 25 mm diameter. They have a 4 x 4 array and are molded of glass-reinforced polyketone. The racks’ thermal properties allow for both autoclaving and freezing. The three-tier design is molded in one-piece, and the lower tier is suitable for 28 and 30 mL Nalgene® Oak Ridge Centrifuge…

Fits 35 mL conical Oak Ridge tubes Polycarbonate Easily removed from rotors after use

…highest protein yields. Eliminates unneccesary transfer and minimizes contamination by filtering directly into a 50-mL centrifuge tube. The polypropylene centrifuge tube is supplied with an individually wrapped cap for storage. Funnel size is 150 mL. Case of 12 includes two centrifuge tube stands.

…conical tubes fit 20mm racks; 50mL conical fit 30mm racks. No assembly is required; rack is ready to use. Securely hold a full load of test tubes or centrifuge tubes for 13, 16, 20, 25 and 30mm diameter sizes with Thermo Scientific™ Nalgene™ Unwire™ Test Tube Racks.…

…rotors for high-speed molecular biology applications in tubes from 0.2mL to 50mL High centrifugation speed of up to 21,194 x g (13,700 rpm) Aerosol-tight Eppendorf QuickLock® caps and lids allow fast and ergonomic lid locking Centrifuge lid with soft-touch lid closure Quiet operation…

Constructed of polypropylene Baskets hold test tubes, centrifuge tubes and bottles Designed for autoclaving, washing and incubating Each basket comes with a permanently attached lid. Tapered sides allow baskets of the same size to nest for storage. Slotted to allow complete drainage and…

Full-size Unwire test tube racks securely hold a full load of test tubes or centrifuge. Up to 72 of the smaller diameter tubes can be held at once. Molded in six bright, permanent colors Resmer™ manufacturing technology makes these racks keep their bright colors longer. Useful in a wide…

Full-size Unwire test tube racks securely hold a full load of test tubes or centrifuge. Up to 72 of the smaller diameter tubes can be held at once. Molded in six bright, permanent colors Resmer™ manufacturing technology makes these racks keep their bright colors longer. Useful in a wide…

Fiberlite F14-6 x 250LE Rotor for 250 mL Nalgene Bottles Rotor Capacity   (places x volume, mL):  6 x 250 mL Maximum Tube  Dimensions  (Ø x L, mm):  62 x 125

Process tubes at their highest rated speed level (10,000 x g or greater) without leakage, even when full. Thermo Scientific™ Nalgene™ Sealing Cap Assemblies include a Viton™ fluoroelastomer o-ring. Also recommended when spinning hazardous materials compatible with centrifuge tube…

Autoclavable Two-part assembly For attachment to centrifuge tubes or bottles to prevent leakage during extremely high speed centrifugation. Two-part assembly consists of polypropylene screw closure and a retained silicone gasket. Caps can be written on for easy notation.

…from 50 to 1000 cc/L in 10 cc/L intervals. Paddle is 121 x 254 x 3 mm thick. Centrifuge tubes are graduated from 0 to 15 mL in 0.1 mL intervals; overall dimensions: 17 mm o.d. x 119 mm long. Tubes withstand forces of up to 6000x gravity. For replacement centrifuge tubes, see Thomas number 2610K11.