Replacement part for the Millipore stainless steel membrane filter holder, (XX45 047 00). Support Screen, 47 mm

Advanced protection against airborne contaminants for storage tanks of Milli-Q® CLX 7000 series systems

Provides fast sample processing, high sample recovery This Amicon Ultra 15 mL centrifugal filter enables the concentration of proteins with a membrane NMWL of 50 kDa. Amicon Ultra centrifugal filters are ideal for protein purification, protein concentration & desalting. The…

MILLIFLEX OASIS® 100 mL funnel is a ready-to-use, sterile filter unit that combine a funnel and a gridded membrane filter in a single device offering a complete solution for bioburden testing. The filter unit is made of Styrene butadiene copolymer and the membrane is made of mixed cellulose esters…

A 33 mm diameter sterile syringe filter with a 0.22 µm pore size hydrophilic Polyethersulfone (PES) membrane. Color Code: Green Connections, Inlet/Outlet: Female Luer-Lok/Male Luer slip Maximum Inlet Pressure, bar (psi): 10 (145) Sterilization: Gamma irradiation

A 33 mm diameter sterile syringe filter with a 0.22 µm pore size hydrophilic Polyethersulfone (PES) membrane. Color Code: Green Connections, Inlet/Outlet: Female Luer-Lok/Male Luer slip Maximum Inlet Pressure, bar (psi): 10 (145) Sterilization: Gamma irradiation

Synonyms: filter bottles Legal Information: TPP is a registered trademark of TPP Techno Plastic Products AG

Millipore filters with binder resin have superior wet strength and are excellent for qualitative analysis and prefiltration, especially for heavily contaminated liquids. They are also widely used for clarification of aqueous solutions. Type AP15 Lowest dirt-holding capacity …

Provides fast sample processing, high sample recovery This Amicon Ultra 0.5 mL centrifugal filter enables the concentration of proteins with a membrane NMWL of 3 kDa. Amicon Ultra centrifugal filters are ideal for protein purification, protein concentration & desalting. The…

No matter what application you're working with, Millipore has a plate developed to meet your specific needs. MultiScreen plates have a long history as a reliable tool for the advancement of drug discovery and life science research. HTS Filter Plates - MultiScreenHTS plates are specifically…

Millex® sterile syringe filters are ideal for sterilizing organic solvents, aqueous solutions or air/gas. Many sample preparation methods specify Millex filters because of their unsurpassed quality and consistency. Millex filters not only feature minimal hold-up volume and faster flow rates, but…

AMICON ULTRA-4 CENTRIFUGE FILTER UNIT, 4ML - 10 KDa cutoff. Available in 3 pack sizes.UFC801008D - 8 packUFC801024D - 24 packUFC801096D - 96 packHigh recovery Ultracel regenerated cellulose membrane in a range of molecular weight cut-offsHigh retentate recovery of greater than 90%Vertical membrane…

Polypropylene prefilter constructed of 100% virgin polypropylene media. This filter is ideally suited for general clarifying & prefiltration applications including solvents, deionized water & bioburden reduction.

Applications Vacuum-filter air or other gases from open atmospheres or from closed systems for particulate contamination analysis. Standard holder Closed system connection, with inlet dispersion chamber and 11 mm O.D. inlet/outlet connections. Open-type holder Full-area inlet…

Replacement part for Millipore's ZHE (Zero Head Space Extractor) system (1211J58). 90 mm Support Screen Stainless steel

The Isopore membrane is a polycarbonate, track-etched screen filter recommended for all analyses in which the sample is viewed on the surface of the membrane. Isopore membrane offers distinct advantages for the analysis of airborne contaminants and other particles using optical or electron…

STERIFLIP® FILTERS Compatible with 50 mL centrifuge tubes, Steriflip® filters eliminate the liquid transfer step by integrating directly into the sample tube. To filter, attach the unit to the 50 mL centrifuge tube containing your sample, flip, and apply vacuum. The filtrate…

With their vertical membrane design, Amicon Ultra 0.5 mL filters deliver great performance and lower spin times. This Amicon Ultra 0.5 mL centrifugal filter enables the concentration of proteins with a membrane NMWL of 50 kDa. Amicon Ultra centrifugal filters are ideal for protein…

MultiScreen-HV Filter Plates 0.45 µm clear non-sterile

Provides both ultra-fast spin times and ultra-high recoveries This Amicon Ultra 15 mL centrifugal filter enables the concentration of proteins with a membrane NMWL of 30 kDa. Amicon Ultra centrifugal filters are ideal for protein & nucleic acid purification, concentration & desalting.…

STERILE MILLEX® SYRINGE FILTERS Applications include sterilizing cell culture reagents such as cell culture media, antibiotics, supplements, sera, viruses for infection, and other biological solutions Fast flow and low binding for cell culture media preparation with Millipore…

Vacuum filtration apparatus for HPLC solvent purification, particulate analysis, bacteriological studies, radiochemical determinations, quantitative gravimetric analysis, and similar applications. Clamp seals filter membrane between flanges on funnel top and funnel stem.Includes: Funnel top, funnel…

A ready-to-use and disposable filtration unit for microbiological analysis of beverages and in-process water Convenient and easy to use Sterilized, ready to use devices saves time and expense Test beverages and other liquids faster and easier with 55-Plus monitors from Millipore. These…

Millipore Swinnex™ Filter Holder, 13 mm. Use to ultraclean or sterilize small volumes of liquids dispensed by syringe Made of polypropylene with silicone gasket These filter holders accept 13mm membrane filters of your choice Autoclavable with filter in place for sterile…

STERILE MILLEX® SYRINGE FILTERS Applications include sterilizing cell culture reagents such as cell culture media, antibiotics, supplements, sera, viruses for infection, and other biological solutions Fast flow and low binding for cell culture media preparation with Millipore…

Provide both high sample recovery and fast sample processing This Amicon Ultra 15 mL centrifugal filter enables the concentration of proteins with a membrane NMWL of 100 kDa. Amicon Ultra centrifugal filters are ideal for protein purification, protein concentration & desalting. …

Steritop bottle top filter units provide a large filter area for rapid sterile filtration of aqueous fluids into narrow-mouth (33 mm) or wide-mouth (45 mm) bottles. A small tab inside the funnel secures an optional prefilter in-place during filtration. For added protection against contamination,…

For contamination analysis Transparent, disposable filter holders made from Tenite® plastic and pre-assembled with MF-Millipore filters (effective filtration area is 9 cm 2 ). A thick cellulose pad, 34 mm diameter, between the monitor sections seals the filter to distribute sample flow…

Provide both high sample recovery and fast sample processing. This Amicon Ultra 15 mL centrifugal filter enables the concentration of proteins with a membrane NMWL of 10 kDa. Amicon Ultra centrifugal filters are ideal for protein purification, protein concentration & desalting. …

This 25 mm syringe filter with a Hydrophobic PTFE membrane, for non-sterile filtration, has a 0.45 µm pore size used in clarification of organic solvents. For removing particulates, reducing signal-to-noise ratios and maintaining flat baselines Hydrophobic PTFE Membrane is…

Polycap TF filter devices are among the finest disposable encapsulated filters. These capsules are made with durable, hydrophobic polytetrafluoroethylene (PTFE) membranes in a polypropylene housing and are designed for use with organic solvents and chemically aggressive solutions. Polycap…

Overview Cellulose support pads are used to reinforce filters in Millipore's monitors for contamination analysis. When saturated with growth medium, they can also be used for culturing microorganisms on membranes. Woven mesh spacers are placed between filters in serial filtration to…