MilliporeSigma Chemicals Standards S
-
UN No.: 1824 pH: 13.5 (H2O, 20°C) Solubility: (20°C) not applicable Density: 1.022 g/cm3 (20°C) Ignition Point: 13.5 (H2O, 20°C)
-
UN No.: 3264 pH: 0.5 (H2O, 20°C) Solubility: (20°C) soluble Density: 1.02 g/cm3 (20°C) Ignition Point: 0.5 (H2O, 20°C)
-
CertiPUR® Copper ICP Standard, 1000 ppm
MilliporeSigmaFormula: Cu(NO3)2 in HNO3 2-3% Formula Weight: N/A Synonym(s): Copper nitrate in nitric acid Suprapur® 2-3% Description: Composition:
-
UN No.: 3264 pH: 0.5 (H2O, 20°C) Solubility: (20°C) not applicable Density: 1.013 g/cm3 (20°C) Ignition Point: 0.5 (H2O, 20°C)
-
di-Sodium Tetraborate Decahydrate
MilliporeSigmaSynonyms Borax, Sodium biborate decahydrate, Sodium borate decahydrate Hill Formula B4Na2O7*10H2O Chemical formula Na2B4O7*10 H2O HS Code …
-
UN No.: 3264 pH: 0.5 (H2O, 20°C) Density: 1.013 g/cm3 (20°C) Ignition Point: 0.5 (H2O, 20°C)
-
UN No.: 3264 pH: 0.5 (H2O, 20°C) Solubility: (20°C) soluble Density: 1.013 g/cm3 (20°C) Ignition Point: 0.5 (H2O, 20°C)
-
pH: 7 (H2O, 20°C) Density: 1.00 g/cm3 (20°C) Ignition Point: 7 (H2O, 20°C)
-
UN No.: 3264 pH: 0.5 (H2O, 20°C) Solubility: (20°C) soluble Density: 1.013 g/cm3 (20°C) Ignition Point: 0.5 (H2O, 20°C)
-
Silicon ICP Standard, 1000 ppm
MilliporeSigma1 mL = 1 mg Si (1,000 ppm Si) Si in 3% HNO3 / trace HF
-
Solubility: (20°C) soluble Density: 0.998 g/cm3 (20°C)
-
Standard Oil For Atomic Absorption Spectroscopy
MilliporeSigmaCAS No.: 8012-95-1 pH: (H2O) not applicable Solubility: (20°C) practically insoluble Vapor Pressure: 0.0001 hPa (20°C) Flash Point: 195°C Density: 0.85 g/cm3 (20°C) Ignition Point: (H2O) not applicable Saturation Concentration: >300°C Evaporation Number: 16 mm2/s (40°C)
-
UN No.: 2031 pH: (H2O, 20°C) Density: 1.031 g/cm3 (20°C) Ignition Point: (H2O, 20°C)
-
SOLu-Trypsin
MilliporeSigmaSOLu-Trypsin (EMS0004) is our exclusive, Advanced Proteomics Grade enzyme that is solution stable for mass spectrometry. Designed to be stable in solution when refrigerated, SOLu-Trypsin can be used immediately without preparation. Other forms of trypsin require thawing or reconstitution, and must…
-
CertiPUR® Sodium Carbonate Volumetric Standard
MilliporeSigmaSecondary reference material for acidimetry, traceable to NIST SRM Certipur® volumetric standards for reliable results in titration Proper titer determination is an important prerequisite for accurate and comparable analysis in the titration laboratory. Influential factors such as…
-
-
UN No.: 3264 pH: (H2O, 20°C) Density: 1.038 g/cm3 (20°C) Ignition Point: (H2O, 20°C)
-
Sulfide IC Standard
MilliporeSigmaThis certified reference material (CRM) is produced and certified in accordance with ISO Guide 34:2009 and ISO/IEC 17025:2005. All information regarding the use of this CRM can be found on the certificate of analysis. Values of analytes vary lot to lot. Some lots may not contain all analytes.
-
UN No.: 3264 pH: 0.5 (H2O, 20°C) Solubility: (20°C) soluble Density: 1.013 g/cm3 (20°C) Ignition Point: 0.5 (H2O, 20°C)
-
-
-
UN No.: 1824 pH: 13.5 (H2O, 20°C) Solubility: (20°C) not applicable Density: 1.022 g/cm3 (20°C) Ignition Point: 13.5 (H2O, 20°C)
-
UN No.: 3264 pH: 0.5 (H2O, 20°C) Solubility: (20°C) soluble Density: 1.013 g/cm3 (20°C) Ignition Point: 0.5 (H2O, 20°C)
-
UN No.: 1824 pH: 12.5 (H2O, 20°C) Solubility: (20°C) not applicable Density: 1.055 g/cm3 (20°C) Ignition Point: 12.5 (H2O, 20°C)
-
Certipur® Nickel ICP Standard
MilliporeSigmaTraceable to SRM from NIST, Ni(NO3)2 in HNO3, 2-3%, 10000 mg/l Ni
-
-
UN No.: 3264 pH: 0.5 (H2O, 20°C) Solubility: (20°C) not applicable Density: 1.013 g/cm3 (20°C) Ignition Point: 0.5 (H2O, 20°C)
-
UN No.: 3264 pH: Solubility: (20°C) not applicable Density: 1.018 g/cm3 (20°C) Ignition Point:
-
This stable-labeled internal standard is suitable for quantification of scopolamine levels by LC/MS or GC/MS for applications in clinical toxicology, food testing, and forensic analysis. Scopolamine, also known as hyoscine, is a naturally-derived medication used to treat postoperative nausea and…
-
UN No.: 3264 pH: 0.5 (H2O, 20°C) Solubility: (20°C) soluble Density: 1.013 g/cm3 (20°C) Ignition Point: 0.5 (H2O, 20°C)
-
Sirolimus-D3 sol. 100 mug/mL in acetonitrile, 1mL ampule
MilliporeSigmaA stable-labeled internal standard for the immunosuppressant sirolimus, an immunosuppressant and narrow therapeutic index drug used to prevent rejection in organ transplantation. This ertified calibration material is suitable for critical quantitative LC-MS/MS applications in clinical and…