Filtration Assembly

Compare Tool

Select up to 3 products

Filtration Assembly
1 - 32 of 74
Sort
View
Show
  • 47mm Filtration Assembly with Standard Taper 40/35 Joint Connection and Fritted…

    DWK Life Sciences (Wheaton)

    Ideal for HPLC solvent/sample filtrate recovery, as well as filtration of corrosive liquids for particulate contamination analysis The flask and fritted glass base are joined with a Standard Taper 40/35 ground joint, so liquids will only come in contact with borosilicate glass Vacuum…

  • ULTRA-WARE® Microfiltration Assembly with Fritted Glass Support and Ground Joint…

    DWK Life Sciences (Kimble)

    The 90 mm filtration assembly with fritted glass support is designed for large volume filtration analysis of corrosive liquids or samples with high particulate loads that would tend to clog a 47 mm diameter filter. This unit is also recommended for filtering large volumes of HPLC solvents. …

  • Sigma-Aldrich® vacuum filtration assembly

    MilliporeSigma

    … General description Same as Z290432 but with NS 40/35 jont (male on flask, female on funnel support) instead of rubber stopper. Vacuum filtration apparatus for HPLC solvent purification, particulate analysis, bacteriological studies, radiochemical determinations, quantitative gravimetric…

  • SYNTHWARE Filtration Apparatus

    Kemtech America

    …for filtering corrosive solutions, particulate removal from HPLC solvents, and filtration analysis with solid phase extraction disks. Support base has a sealed-in coarse porosity fritted disc. Complete assembly includes a 300mL graduated funnel, aluminum clamp, support base and l liter filtering…

  • 47mm Membrane Filtration Apparatus

    Ace Glass

    …glass filtration apparatus accomodates 47mm diameter membrane filters. The new design utilizes a nylon Ace-Thred adapter to join the glass funnel, filter flask and fritted disc together. This design eliminates the need for the clamping device, stopper and base piece. The unit is easy to assemble,

  • 25mm All-Glass Filtration Assemblies

    Advantec MFS

    …Borosilicate glass filter holder assemblies for the microanalysis of liquids for biological or particulate contamination under vacuum. The All-Glass design restricts contact with reactive surfaces such as steel or rubber to minimize contamination of filtrate. The 15mL filtration funnel mounts on the…

  • Funnel / PTFE Supp Assy 47mm

    DWK Life Sciences (Kimble)

    This 47 mm vacuum microfiltration assembly is used for autoclaving with the filter in place and is designed to handle up to 500 mL of sample liquids for the analysis of particulate or microbiological contamination. Supplied with a 40-60 micron porosity PTFE-faced fritted glass support base,…

  • 524 aPES Filter Unit

    Thermo Scientific Nalgene

    …housing 50 mm Supor® machV PES membrane 115 mL capacity The 524 is an economical asymmetric polyethersulfone filter unit that is suitable for small-volume benchtop filtration. Wide, stable base design. Pore size (0.2 µm) and membrane type are printed in easy-to-see Blue on the side of each unit.

  • Filterware™ Microfiltration Glassware

    Wilmad LabGlass

    These filter assemblies for FILTERWARE™ filtration system consist of an all-borosilicate glass funnel, fritted glass support base, aluminum clamp, and silicone stopper. Choose from 47mm or 90mm filter assembly sizes. Individual components are offered in various sizes for a customized unit. For…

  • 13mm Glass Vacuum Holder Assemblies

    Advantec MFS

    Filter small volumes  3 funnel sizes  Concentrate samples in small area Borosilicate glass filter holder assembly for microanalysis of small volumes of liquids under vacuum. Filter biological samples or organic solvents. The holder utilizes a 25mm filter membrane yet…

  • Vacuum Filter Assemblies

    DWK Life Sciences (Wheaton)

    …a coarse porosity fritted glass filter support base, an aluminum clamp and a 300 mL glass funnel Screen is removable in assemblies with stainless steel support screen. Assemblies with Teflon® faced bases and funnels allow the assembly to be autoclaved with the filter membrane in place.

  • 47mm All-Glass Filtration Assemblies

    Advantec MFS

    … Borosilicate glass filter holder assemblies for the microanalysis of liquids for biological or particulate contamination under vacuum. The All-Glass design restricts contact with reactive surfaces such as steel or rubber to minimize contamination of filtrate. The 300mL graduated funnel mounts on…

  • Microfil S Filtration Devices

    MilliporeSigma

    …funnel, protective lid, and filtration support so routine microbiological testing is fast and easy. No mem/pane handling prior to filtering. No filter holders, funnels and attachments to assemble and sterilize. No sterilizing the filter support after each filtration. Sterile, individually packaged…

  • SYNTHWARE Stainless Steel Filtration Apparatus

    Kemtech America

    …solutions, particulate removal from HPLC solvents, and filtration analysis with solid phase extraction disks. Support base has removable 47mm stainless steel support screen for use with viscous or proteinaceous solutions. Complete assembly includes a 300mL graduated funnel, aluminum clamp, support…

  • FlipMate 100

    Environmental Express

    …accepts two threaded SC490 sample cups (cups are sold separately) - one containing the sample to be filtered and an empty cup to receive the filtrate. The assembly is then "flipped" over and vacuum is applied. The sample is pulled through the filter into the empty cup. The filtered sample…

  • Filtration Assemblies & Flask

    DWK Life Sciences (Kimble)

    …funnels are graduated for accuracy Choose the Ultra-Ware microfiltration assembly that best fits your application Fritted Glass Support, 25 mm (4588A01) Used for general filtration. Supplied with a coarse fritted glass support base, 15 mL graduated funnel, anodized…

  • 47mm Phase/Fraction Collector Filtration Assemblies

    Advantec MFS

    Collect aliquots of filtrate during filtration Two mounting options: No.8 stopper or 40/35 joint Sintered glass, Stainless steel, or PTFE filter support Borosilicate glass filter holder assemblies for the microanalysis of liquids for biological or particulate contamination under…

  • 47mm Filtration Assembly with Fritted Glass Support

    DWK Life Sciences (Wheaton)

    Designed to collect the filtrate directly into a standard laboratory bottle Connection to the bottle is made with a polybutylene terephthalate (PBT) cap and a PTFE-faced silicone sealing ring Glass components are manufactured from Wheaton 33 low extractable borosilicate glass that conforms to…

  • Filtration Adapter Assembly

    DWK Life Sciences (Wheaton)

    Filtration adapter assembly makes it easier to connect standard 47 and 90mm filtration assemblies with stopper connections to a standard laboratory bottle with a GL45 thread Replaces the stopper to make the connection to the bottle A GL32 PBT cap with a PTFE faced silicone sealing ring makes…

  • Filtration apparatus assembly

    Ace Glass

    Filtration apparatus assembly. This apparatus differs from the standard units as it utilizes our Instatherm technology to evenly heat the upper 500mL filter funnel, thus keeping the viscous material such as polymers in the liquid state. The middle adapter and snap ring are PTFE. The interchangeable…

  • Microfil V Filtration Device

    MilliporeSigma

    With Microfil V filtration devices, there are no filter holders to assemble, no filter funnels to clean, and no filter support sterilization is needed after each filtration. Simply snap a Microfil V filtration device off the convenient carrying tray and you're ready to test. Place the device…

  • FilterMate™ Filtration System

    Environmental Express

    …of filtration requiring no transfer steps. The FilterMate fits directly into the digestion vessel and is pushed through the liquid being filtered to the bottom of the cup with a detachable plunger. After filtration is complete, the plunger is removed and discarded while the filter assembly remains…

  • Borosilicate glass filtration apparatus

    Ace Glass

    …glass filtration apparatus accomodates 75mm membrane filters. The new design utilizes a PTFE Ace-Thred adapter to join the glass funnel, filter flask and fritted disc together. This design eliminates the need for the clamping device, stopper and base. The unit is easy to assemble, disassemble…

  • Borosilicate Glass Filtration Apparatus

    Ace Glass

    …glass filtration apparatus accomodates 25mm membrane filters. The new design utilizes a nylon Ace-Thred adapter to join the glass funnel, filter flask and fritted disc together. This design eliminates the need for the clamping device, stopper and base. The unit is easy to assemble, disassemble…

  • Adapter Assembly with GL 45 Thread

    DWK Life Sciences (Kimble)

    This adapter assembly is designed to allow connection of a 47 mm or 90 mm filtration support base with a straight drip tip to a bottle or reservoir with a GL 45 thread. Filtrate is collected directly into a media-type bottle when using a standard membrane filtration assembly  

  • Solvent Filtration Disposable Vacuum Bottle Top Filters

    labForce (a Thomas Scientific Brand)

    The labForce Solvent Filtration Bottle Top Vacuum Filters offer a revolutionary approach to bulk solvent filtration. Safer, faster, and easier to use than conventional glass filtration assemblies, labForce’s Solvent Filtration funnels screw onto any vacuum-capable GL45 threaded bottle. Simply…

  • Whatman Autovial Syringeless Filters

    GE Healthcare

    …syringe-coupled sample filtration devices with a single, disposable unit. Autovial from GE Healthcare’s Life Science business combines Whatman quality membranes and devices with an all-in-one syringeless filter design. Streamlined sample filtration with autosampler vials Filtration involving…

  • Autofil® PP Bottle-Top Filters for Solvent Filtration

    Foxx Life Sciences

    Foxx Life Sciences' Autofil® PP bottle-top filters for solvent filtration are a revolutionary new way to purify solvents for analytical applications to obtain sterilized or purified extracts. Foxx has developed the world's first single piece polypropylene funnel, designed to withstand…

  • Accessories for Vacuum Holder and Filtation Assemblies

    Advantec MFS

    …Holder , see 1177G36 For accessories that work with   47mm All-Glass Filtration Assemblies , see  1177G77 For accessories that work with  47mm Phase/Fraction Collector Filtration Assemblies , see 1177G36,  1177G60,  1177G77, and 1177G84

  • 90mm Glass Vacuum Holder Assemblies

    Advantec MFS

    …glass or Stainless steel support Borosilicate glass filter holder assemblies for the microanalysis of liquids for biological or particulate contamination under vacuum. The 90mm holder offers an increased filtration area making it ideal for viscous samples and liquids with a heavy particle…

  • Minifold I System

    GE Healthcare

    …accessory plates or in conjunction with a complete system. The tension on the clamping is adjustable, permitting use of a variety of blotting and filtration media. Minifold I Spot-Blot System, 96 well Small volume required: Sample volumes as low as 25 µl can be applied so you use less of your…

  • 25mm Glass Vacuum Holder Assemblies

    Advantec MFS

    …glass frit support base can be used for general filtration, the 304 stainless steel screen(w/ PTFE gasket) is recommended for viscous or proteinaceous solutions to maximize flow rate and the screen ensures particles will not be shed into the filtrate. Available in three graduated funnel capacities…

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.