Weakly basic secondary and tertiary ammonium polymeric anion exchanger for SPE Features Base material spherical PS/DVB copolymer, pore size 55–65 Å, particle sizes 45 µm or 85 µm (standard) very large specific surface 850 m2/g, pore volume 1.2–1.4 cm3/g, pH…

CHROMABOND® SPE products Features More than 50 different sationary phases available e.g., silica gel based: unmodified, C8, C18, NH2, CN; Polyermic material: HR-X, HLB, PA; mixed-mode, special combinations, aluminum oxide, kieselguhr (XTR) etc. NP, RP, ion exchanger and for special…

Features More than 50 different sationary phases available e.g., silica gel based: unmodified, C8, C18, NH2, CN; Polyermic material: HR-X, HLB, PA; mixed-mode, special combinations, aluminum oxide, kieselguhr (XTR) etc. NP, RP, ion exchanger and for special applications Different…

Kieselguhr phase for liquid-liquid extraction Features Base material coarse-grained kieselguhr (also known as diatomaceous earth, hydromatrix, celite) large pore size, high pore volume, constantly high batch-to-batch quality pH working range 1–13 Application: …

VarioPrep (VP) columns for preparative HPLC Features Column system for preparative HPLC manufactured from stainless steel with two adjustable end fittings, e.g., for frequent use of backflushing techniques Allows compensation of a dead volume, which could result at the column inlet…

Special silica phase for SPE of THC and derivatives acidic analytes from biological fluids (urine, blood ...) Features Base material silica, pore size 60 Å, particle size 45 µm, specific surface 500 m2/g, pH stability 2–8 special bifunctional modification – C8 /…

Octadecyl modified silica phase for SPE of polar analytes Features Base material silica, pore size 60 Å, particle size 45 µm, specific surface 500 m2/g, pH stability 2–8 Special octadecyl phase for polar analytes, not endcapped, carbon content 15 % Recommended…

Features More than 50 different sationary phases available e.g., silica gel based: unmodified, C8, C18, NH2, CN; Polyermic material: HR-X, HLB, PA; mixed-mode, special combinations, aluminum oxide, kieselguhr (XTR) etc. NP, RP, ion exchanger and for special applications Different…

Special silica phase for determination of pesticides in food samples Features Base material silica, pore size 60 Å, particle size 45 μm, specific surface 500 m2/g, pH stability 2–8 Primary and Secondary Amine functions (PSA), 5 % C Removes polar compounds (e.g.,…

NUCLEODUR® is a fully synthetical type B silica (silica of 3rd generation) offering highly advanced physical properties: Totally spherical particle shape Outstanding surface microstructure High pressure stability Low metal content NUCLEODUR® as a state-of-the-art silica…

Dimethyl modified silica phase for SPE, not endcapped Features Base material silica, pore size 60 Å, particle size 45 µm, specific surface 500 m2/g, pH stability 2–8 Dimethyl phase, not endcapped, carbon content 4 % Similar to C4 Recommended application: e.g.,…

NUCLEODUR® is a fully synthetical type B silica (silica of 3rd generation) offering highly advanced physical properties: Totally spherical particle shape Outstanding surface microstructure High pressure stability Low metal content NUCLEODUR® as a state-of-the-art silica…

NUCLEOSIL® is a family of totally porous spherical silicas with a very pure and uniform SiO2 structure Wide acceptance as routine packings for very different fields of chromatography One of the first spherical silicas used in HPLC Developed in the early seventies, it became a…

Cyanopropyl modified silica phase for SPE Features Base material silica, pore size 60 Å, particle size 45 µm, specific surface 500 m2/g, pH stability 2–8 cyanopropyl phase, carbon content 5.5 %, polar to mid-polar In addition to weak hydrophobic interactions…

Combination phase for SPE of hydrocarbons from water acc. to DIN H53 / ISO DIS 9377-4 Features Special combination phase of sodium sulfate and Florisil® Recommended application: hydrocarbons from drinking, surface and waste waters

NUCLEOSIL® is a family of totally porous spherical silicas with a very pure and uniform SiO2 structure Wide acceptance as routine packings for very different fields of chromatography One of the first spherical silicas used in HPLC Developed in the early seventies, it became a…

VarioPrep (VP) columns for preparative HPLC Features Column system for preparative HPLC manufactured from stainless steel with two adjustable end fittings, e.g., for frequent use of backflushing techniques Allows compensation of a dead volume, which could result at the column inlet…

Hydrophobic reversed phase with distinct polar selectivity for special PFAS analysis. Suitability for PFAS analysis is assured through qualified batch analysis. This HPLC phase is made of high purity NUCLEODUR HPLC silica gel and is extensively endcapped. Due to a low bleeding characteristics these…

OPTIMA® 1 Capillary columns for GC Features 100 % dimethylpolysiloxane · USP G1 / G2 / G38 Nonpolar phase Separation of components according to boiling points Thick film columns ≥ 3 µm film are expecially recommended for solvent analysis. Low bleed…

NUCLEOSIL® is a family of totally porous spherical silicas with a very pure and uniform SiO2 structure Wide acceptance as routine packings for very different fields of chromatography One of the first spherical silicas used in HPLC Developed in the early seventies, it became a…

Magnesium silicate for SPE Features Matrix magnesium silicate (MgO – SiOH 15:85), high purity, particle size 150–250 µm Recommended application: organic tin compounds, aliphatic carboxylic acids, PCBs, PAHs

Polymer-based SPE phases for RP and ion chromatography Features Base material: high purity polystyrene-divinylbenzene copolymers (PS/DVB), pore size 100 Å, particle size 100 µm very low degree of swelling, thus very well suited for chromatography reliable function…

NUCLEODUR® is a fully synthetical type B silica (silica of 3rd generation) offering highly advanced physical properties: Totally spherical particle shape Outstanding surface microstructure High pressure stability Low metal content NUCLEODUR® as a state-of-the-art silica…

NUCLEODUR® is a fully synthetical type B silica (silica of 3rd generation) offering highly advanced physical properties: Totally spherical particle shape Outstanding surface microstructure High pressure stability Low metal content NUCLEODUR® as a state-of-the-art silica…

Ideal for Flash separations from 10 mg up to 33 g Features For convenient operation and reliable upscaling the complete program of ready-to-use Flash cartridges for the Isco Companion® and other Teledyne Isco CombiFlash® systems, or as stand-alone version for all…

NUCLEOSHELL® core-shell silica phases for HPLC NUCLEOSHELL® Core-shell technology provides Better resolution at lower back pressure and shorter retention time Solid core of silicon dioxide Homogeneous shell of porous silica Highest efficiency compared to traditional…

Hydrophilic-lipophilic balanced N-vinylpyrrolidone-divinylbenzene resin for SPE Features Hydrophilic-lipophilic balanced N-vinylpyrrolidone-divinylbenzene copolymer pH stability 1–14 Spherical particles 30 μm or 60 μm (standard) Pore size 65 Å Specific surface…

VarioPrep (VP) columns for preparative HPLC Features Column system for preparative HPLC manufactured from stainless steel with two adjustable end fittings, e.g., for frequent use of backflushing techniques Allows compensation of a dead volume, which could result at the column inlet…

NUCLEODUR® is a fully synthetical type B silica (silica of 3rd generation) offering highly advanced physical properties: Totally spherical particle shape Outstanding surface microstructure High pressure stability Low metal content NUCLEODUR® as a state-of-the-art silica…

NUCLEOGEL® RP Polymer-based reversed phase HPLC phases, USP L21 Properties / Key Features Polystyrene resin cross-linked with divinylbenzene Higher background hydrophobicity compared to silica phases Available particle sizes 5 μm and 8 μm; pore sizes 100 Å and 300…

HPLC columns for analysis of inorganic anions NUCLEOGEL® Anion I: strongly basic polymer-based anion exchanger, particle size 10 µm pH stability: 1–14 eluent in column 4 mmol/L salicylate buffer pH 7.8 contrary to the silica-based phase also suited for fluoride analysis