Humboldt, Nucleic Acid
-
Hook Clamp
HumboldtThe Clamp Hook locks into any position to support suspended thermometers, drying tubes and potash bulbs. The unit has an easy-adjusting check nut and has a 5-1/8" (130mm) maximum distance from center of muff to the hook. The minimum distance is set at 4-1/2" (114mm).
-
With heavy, rectangular base of plate steel, finished in hard enamel Zinc-plated steel rod is machined at lower end with U.S. National coarse thread 508 mm rod is 9.5 mm in diameter with 3/8-16 thread; 610 and 914 mm, 13 mm in diameter with 1/2-13 thread 8835B50 support is furnished…
-
Dovetail Clamp
HumboldtThis clamp can be instantly detached from vertical surfaces such as heaters. It is constructed of aluminum and incorporates a 5/16"-18 by 1-1/4" steel thumbscrew. The clamp is 1-3/16" wide by 2-15/16" (30mm x 59mm) long and measures 1-3/8" (35mm) from muff center to the dovetail.
-
Similar in design to our Screw Compressor Clamps except that the compression adjustment screw has a 1" (25mm) diameter serrated head for greater leverage. The clamps are constructed from brass and plated for corrosion resistance.
-
Center-flanged Pipe Stem Triangles protect glassware on hotplates and over burner flames.
-
Humboldt Test Tube Clamp
HumboldtThe Humboldt Mfg. Co test tube clamp is suitable for use in research facilities and chemical laboratories while conducting experiments. It is made of high quality material which ensures durability and long lasting usage.
-
Similar in design to our Screw Compressor Clamps except that the compression adjustment screw has a 1" (25mm) diameter serrated head for greater leverage. The clamps are constructed from brass and plated for corrosion resistance.
-
14ga Round, Nickel-Chrome Wire Triangles protect glassware on hotplates and over burner flames.
-
14ga Square, Nickel-Chrome Wire Triangles protect glassware on hotplates and over burner flames.
-
Universal Plasticol coated jaws Swivel jaws of stamped steel; forged steel shank Recommended for condensers and irregular shapes
-
Funnel Support
HumboldtThe Humboldt Funnel Support is designed to accept up to four funnels. The unit consists of a hard wood support with four slotted holes and a metal clamp with thumbscrew for support rod mounting.
-
Screw Compressor Clamps are used to control the flow in flexible tubing. The clamps have a machined adjustment screw to permit accurate regulation of the flow. All corners are rounded to prevent cutting of the tubing. The clamps feature brass construction that is plated for corrosion resistance and…
-
Combination Utility Burette Clamps
HumboldtTwo prong zinc-plated, stamped steel with aluminum alloy holder is adjustable by checknut to any angle Takes objects from 3/8” to 1 3/8” diameter. Fits rods up to 1/2” diameter. Length: 6 3/8”.
-
Platform Jacks
HumboldtThis highly stable jack can be adjusted to any height between 2-1/2" to 10" (64mm to 254mm). The jack will accept loads up to 10 lbs. (45.4 kg). The unit is constructed of aluminum top and bottom plates with a baked-enamel finish and plated steel cross members. Height adjustments are achieved by…
-
Hook Collars
HumboldtHook Collars are used for attaching pulleys, balances, cords, trusses, pendulums, and other apparatus to support rods. The collars are plated for corrosion resistance and are supplied complete with thumbscrew and hook.
-
Rod "Muff" Clamps
HumboldtThese Rod Clamps are otherwise known as the "muff" portion only and can be used to create custom clamps to satisfy a wide range clamping applications.
-
Swivel Clamp Holder
HumboldtFor attaching extension clamps to supports Aluminum construction Has swivel for rods up to 5/8” diameter
-
-
-
Screw Compressor Clamp, Standard Open-Jaw C-Clamp without side post. Jaw Opening: 0-7/8" (0-23mm) Max Height, 1-1/8" (30mm) Max Width
-
Multi Clamp
HumboldtManufactured from heavy die-cast aluminum, this clamp is designed for clamping two pieces of apparatus into any of the three following positions: right angles, parallel, or vertically. The clamp will accommodate attachments up to 1/2"(13mm) in diameter.
-
Humboldt Single Ring Tripod
HumboldtThe Humboldt Mfg. Co single ring tripod is suitable for use in research facilities and chemical laboratories while conducting experiments. It is made of high quality material which ensures long lasting usage.
-
Thermometer Clamps
HumboldtSimilar to the H-8950, this clamp has a phosphor-bronze spring clip attached to an aluminum rod-holding block for thermometers and 2 "v" notches designed to hold the H-1602 ring and stem assembly in an ASTM Softening Point Apparatus, but can be used to suspend other items, such as pitch cubes. The…
-
Clamp and Support Rods
HumboldtDesigned to allow users to mount rod vertically or horizontally. The clamp is cast iron with a black enamel finish. Supplied complete with a 3/8" x 20" (10mm x 508mm) rod (H-21350) or a 1/2" x 24" (13mm x 610mm) rod (H-21360).
-
Sturdy Tripods featuring adjustable openings through the use of detachable rings.
-
Humboldt Clamp Holder
HumboldtThe Humboldt Mfg. Co clamp holder is a critical item to have in any chemical laboratories to enhance the performance of various experiments and analysis.
-
Humboldt Clamp & Support Rod
HumboldtDesigned to allow users to mount rod vertically or horizontally. The clamp is cast iron with a black enamel finish.
-
Electrolytic Support
HumboldtThe "Hoffman Type" Electrolytic Support is used with associated glassware to demonstrate the electrolytic decomposition of water, hydrochloric acid, and other solutions. The unit consists of a cast iron base (H-21225) with insulated binding posts, support rod (H-21360), one burette clamp (H-8022),…
-
Threaded Base Plates
HumboldtDesigned to attach to a tabletop or inverted into a recessed hole for flush mounting. Models are available with either a threaded hole completely through the center or with an unthreaded thru-hole. These die-cast units are supplied without rod. Other sizes are available on request with threaded or…
-
Table Clamp
HumboldtThe Table Clamp is designed to support meter sticks and other round or square rods, either vertically or horizontally up to 1" (25mm) thick. The Vee's are milled at right angles and the clamp can be mounted on table edges up to 1-3/4" (45mm) thick. Each jaw can be adjusted separately. Heavy cast…
-
Smooth Pipe Stem Triangles protect glassware on hotplates and over burner flames
-
Screw Compressor Clamps are used to control the flow in flexible tubing. The clamps have a machined adjustment screw to permit accurate regulation of the flow. All corners are rounded to prevent cutting of the tubing. The clamps feature brass construction that is plated for corrosion resistance and…