Syringe-type for easy, one-handed control of filling and delivery from conventional pipets Knurled thumbwheel is rotated to raise or lower plunger by rack-and-pinion drive For rapid delivery, plunger can be pressed directly Tapered socket grips mouth end of pipet Quick release lever on side of…

Contamination-free stirring-price justifies single use Four convenient sizes Disposable price Resistant to virtually all chemical attacks High-quality stirring bars molded with strong magnets permanently coated with white PTFE. Available in the four most popular sizes to…

Leakproof, rigid and translucent narrow mouth Polypropylene lab bottles can be autoclaved, have excellent chemical resistance and are ideal for storage and sampling of liquids or solids. Bulk packed bottles come with closures included but not attached.

Permanent magnet sealed in shell with triangular cross-section

Polyethylene bottles and spouts come with sealer caps Spout openings standard .030 inches, can be enlarged by cutting with scissors Sealer snaps on easily after using and gives tight seal 15 mL bottles are furnished with size 15 caps; 30 and 60 ml bottles with size 18 caps; 120, 180 and 240 ml…

This bottle is supplied with polypropylene screw closures. Unbreakable, convenient design. For storage, packaging and other uses. Maximum temperature for LDPE is 80°C.

These low density polyethyelene dispenser bottles  feature a graduated clear PMP measuring cup that slides  up and down on the vertical polyethylene tube for  easy adjustment. The variation in height determines  the volume to be dispensed. The cup is filled by squeezing…

Plastic powder funnels feature a wide stem and are autoclavable. Powder funnels are translucent and allow for the passage of larger particles. Economical, fast and efficient powder funnels. Set contains 2 each sizes: 65, 100, 150. All sizes of 342555 series powder funnels except…

High density polyethylene, DOT-2E Type Good chemical resistance Easy to fill and dispense FDA and DOT approved Bottles have wide mouth for ease of filling with dry or liquid materials. Molded pour lip for easy, no-spill pouring. Sturdy, translucent heavy-duty walls are manufactured…

Stir Bar Micro, 1.5X15 mm ( 1210C97 ) Product Dimensions (l x w x h) : 0.591x0.073x0in 15 mm length. For stirring  test tubes, micro-beakers, etc... Covered with polytetrafluoroethylene white resin. Stir Bar Micro, 1.5X8 mm ( 1210C98 ) Product Dimensions (l x w x h) :…

Product Dimensions (l x w x h) : 26.25x5x4.25in Graduated 2 Pour Spouts PVC Hand Grip 500 ml capacity dippers, 18" handle length. High density polyethylene dipper for removing samples from large tanks. Lightweight but extremely durable.

Our stir bars feature ALNICO V magnetic cores which are one of the most powerful permanent magnet alloys available. Stir bars should not be stored in a random mass, or dropped on a hard surface especially steel. Stir bars should be stored in pairs to maintain magnetic strength.

Leakproof, rigid and amber wide mouth polypropylene lab bottles can be autoclaved, have excellent chemical resistance and are ideal for storage and sampling of liquids or solids.

Micro Color-Coded Stirring Bars come in 3 different colors (red, yellow and blue) and various Polytetrafluoroethylene lengths. Colored stir bars may leach in harsh chemicals.

Stir Bar Egg-Shaped 3/8X3/4" (1210D76 ) Product Dimensions (l x w x h) : 0.785x0.397x0.4in PTFE 20 mm length   Stir Bar Egg-Shaped 1/2X1" (1210D77 ) Product Dimensions (l x w x h) : 1x0.511x0.515in PTFE 25 mm length Stir Bar…

Stirring rods are available in two versions: Pure PTFE solid stirring rod with tapered end, and pure PTFE stirring rod with mild steel core. The stirring rod version with steel core can be bent into a permanent shape. Inert and will not scratch, use up to 280°C.

Use Polycarbonate Graduated Bottles with polypropylene closures with biologicals, liquids, reagents, media, buffers and aqueous solutions. Manufactured in Class 10K cleanroom. Narrow mouth Autoclavable and leakproof Glass clear, durable and highly break resistant Graduated in metric…

Unbreakable high-density polyethylene construction Ideal for shipping and storing liquid and solid chemicals and pastes Convenient square design saves space Positive leakproof seal Hole in closure for attachment of tag

Excellent chemical resistance Easy-to-fill Autoclavable Leakproof Bottles and lids are constructed of translucent, rigid polypropylene. Unique closure design eliminates closure back-off. Easy pour container finish permits no-spill pouring.

Cross head magnetic stir bars made of polytetrafluoroethylene. Greater mixing action at bottom, side, and top of container, even at low stirring speeds. No splashing, less noise. For test tubes, round bottom or flat bottom labware. Polytetrafluoroethylene resin with cross-shaped fins and…

Leakproof, rigid and translucent these high-density Polyethylene narrow mouth lab bottles have excellent chemical resistance. Ideal for storage and handling of liquids or solids. Made with FDA approved resin for non-contaminating storage of chemicals and food grade products.  

Test Tube Supports for 10, 13, 16 mm tubes. Acrylic units have clear shelves with white sides and bases.

Leakproof bottles are ideal for a wide range of liquids and solids High performance polypropylene bottle with polypropylene screw cap Autoclavable Wide mouth for easy filling Wide mouth bottles, constructed of high-clarity polypropylene, are available in a full range of sizes…

Heavy wall, wide mouth air tight 1ml Polytetrafluoroethylene bottles with screw closure have machine finish for ease in cleaning.  Virtually immune to chemical attack, only attacked  by some fluorine containing compounds at high temperature  and molten alkalis metals. Working…

Economical, translucent, rigid polypropylene bottles are autoclavable, leakproof and can withstand temperatures up to 121°C. Specially designed polypropylene closure provides leakproof seal and has hole for tagging.

Graduated Plastic Dipper 2 Pour spouts PVC hand grip on 1" diameter HDPE rod 500mL & 1000mL beaker welded to the rigid handle at a 45º angle High density polyethylene dipper for removing samples from large tanks. Made in the USA, these plastic dippers are lightweight…

Product Dimensions (l x w x h) : 3.31x1.09x0.5in Spot Plate LDPE. These spot plates have three depressions 21mm x 7mm deep. Tray is 28mm x 85mm. Made of low density polyethylene and will withstand temperatures to 80º C.

This sturdy stand is fabricated of 3/8" clear  acrylic adding style and function to a normally wall mounted rack. The 4.5 lb stand includes all hardware needed to attach to the 5918-0000 drying rack and also comes with a 5' section of our 1085-0012 vinyl laboratory tubing. Further,…

High-density polyethylene bowl with securely welded solid handle Handy for sampling and dispensing corrosive liquids Available in a variety of sizes

Safe and convenient method of carrying bottles Carrying handle 1” in diameter 1784M50 is non-compartmentalized; overall dimensions: 14” x 6 7/8” x 6”. 1784M52 has six compartments measuring 4 1/2” x 3 3/8” x 6” each. 1784M54 has two compartments…

These low density polyethylene bottles are supplied with a bellow-type dropping pipette. Pipettes are graduated for nominal indication of amount of liquid being drawn. Bellows-shaped bulb makes use easy and provides excellent drop formation.

Product Dimensions (l x w x h) : 6x0.17x0.687in Double Spatula. These polyamide spatulas are glass fiber reinforced and are available in double  spatula or a spatula spoon combination style. Polyamide  is a very strong material with good chemical resistance  against solvents,…