Stirring Rods

Compare Tool

Select up to 3 products

Stirring Rods
1 - 32 of 114
  • Plastic Stirring Rod

    United Scientific Supplies

    Stirring rods made of polypropylene, with both ends rounded.

  • Stirring Rods

    Globe Scientific

    Suitable for stirring even the most corrosive liquids Will withstand 260°C PTFE covered with plain ends 6mm diameter

  • KIMAX Brand Glass Stirring Rods

    DWK Life Sciences (Kimble)

    With both ends rounded Designed from Federal Specification NNN-R-560, Type 1 Length x diameter in mm are shown in listings

  • Electric Laboratory Stirrers

    Arrow Engineering

    … Overload protection-a manually resettable circuit breaker for total safety Each model comes complete as shown including aluminum support rod, 9/16” diameter x 10” long and 6 ft. 3-wire cord with grounded plug. Shaft and propeller are made of stainless steel to resist most acids…

  • Stir Bar Retrievers

    Globe Scientific

    Magnet permanently embedded in PTFE rod Ideal for retrieving magnetic stirrer bars from particularly sensitive or corrosive liquids

  • Borosilicate Glass Rods

    Friedrich & Dimmock

    Popular sizes in convenient packages Lengths are approximately 4', in packs of 10 lbs. Assortment pack contains each size glass rod, in the following quantities.

  • Overhead Stirrer Accessories, Stands and Paddles

    Techne (Bibby Scientific US)

    …overhead stirrer.   Paddle Rods Made from high grade stainless steel, there is a choice of five paddle heads and two lengths of 8mm diameter paddle rod. The heads screw on and off the rods, so they can be mixed and matched depending upon stirring requirements. This gives maximum…

  • Glass Stirring Rod

    United Scientific Supplies

    Soft Glass Stirring Rod, both ends round.

  • Borosil® Reusable Solid Stirring Rods

    Foxx Life Sciences

    In collaboration with Borosil® Glass Works, India, Foxx Life Sciences is proud to bring the outstanding quality of Borosil®’s USP Type 1 Borosilicate glassware to North America for the first time. Manufactured from the same low-expansion, chemically resistant Borosilicate glass North…

  • Stirring Bar Retievers


    … Product Dimensions (l x w x h) : 13.875x0.418x0in PTFE Stirring Bar Retriever 300 mm length for use with all stirring bars. Permanent powerful magnet encapsulated in PTFE and supplied with flexible PTFE rod.   Stir Bar Retriever Polypropylene 18" (1212V71 ) Product…

  • Stir-Pak® General-Purpose Mixers


    …shafts from 5/16" to 3/8" (8 to 10 mm) dia. Mixer includes: 3/8" (9.5 mm) dia x 12" (305 mm) L, 316 stainless steel shaft; 1-1/2" (38 mm) dia propeller; 6" (152 mm) mounting rod; and 6-ft (1.8 m) grounded cord with power supply. Complete system adds: double clamp and support stand.

  • LCD & LED Digital Overhead Stirrers & Accessories


    …control is displayed on the LED display High torque for viscous medium stirring Over torque protection automatically stops the motor A through-shaft design allows for easy adjustment of the impeller position Large chuck diameter for many shaft types Pass through stirrer rods accepted

  • Saint-Gobain Chemware® PTFE Fluoropolymer Stirring Rod

    Saint Gobain

    Inert to corrosives Easy to clean Bendable into shapes These Saint-Gobain Chemware ® PTFE Fluoropolymer Stirring Rods contain a fully enclosed steel insert for stiffness, yet can bend into various shapes for use with powders. Heat resistant to 550° (288°C) and completely inert to highly…

  • Stirring Rods


    Rod Solid PTFE 10" (1212Z20) Product Dimensions (l x w x h) : 9.875x0.335x0in Stirring Rods: flat ends 250 MM length. Pure Polytetrafluoroethylene solid rod with tapered end. Inert and will not scratch, use up to 280ºC. Approximately 1/2" O.D. (8mm). Stirring Rod

  • Labtools Stainless Steel Agitators, Shafts, and Propellers


    Stainless Steel Stirring Rods Blades riveted onto 1/4” shafts Blade pitch can be adjusted to control agitation 18” and 24” lengths recommended for Hollow Spindle Stirrers Stainless Steel Stirring Shafts Stainless Steel Shaft with fatted section for securing…

  • Mini Mixer and Stirring Rods

    Sper Scientific

  • Talboys Hot Plates


    …allow users to dial in adjustments. Rear housing features an integral support rod holder with locking knob to accept the optional support rod and clamp kit. Hotplate is supplied with a 1.5" (3.8cm) PTFE coated stir bar. Hotplate is also supplied with a probe kit which includes an 8"…

  • Rubber Policeman

    United Scientific Supplies

    Natural Rubber Rubber Policeman for stirring rods.

  • Stirring Rods, Polytetrafluoroethylene 4"


    Product Dimensions (l x w x h) : 4.127x0.25x0in Stirring Rods: rounded ends, steel core 100 MM length. The steel core can be bent into a permanent shape. Polytetrafluoroethylene IS inert and will not scratch, use up to 280ºC. Approximately 1/2" O.D. (8mm).

  • Solid Stirring Rods


    Stirring Rod Solid Polytetrafluoroethylene 4" (1210D73 ) Product Dimensions (l x w x h) : 3.865x0.323x0in Stirring Rods: flat ends 100 MM length. Pure polytetrafluoroethylene solid rod with tapered end. Inert and will not scratch, use up to 280ºC. Approximately 1/2"…

  • Magic Wands

    Electron Microscopy Sciences

    …performance plastic, with excellent chemical resistantance and withstands high temperatures (up to 300ºC). Magic wand is ideal for use for electronic high-tech areas to laboratories, from preparation of samples to applying adhesives, using it as a stirring rod, or evendosing samples etc.

  • Stirrer Accessories

    Arrow Engineering

    Support Stand Steel base; legs have rubber pads to cut vibration Support rod is made of stainless steel. Height is 29”; available in two models. Jacob's Chuck, Adjustable Fits 3/8 ” (10 mm) diameter motor shafts Keyless Chuck, Nylon-bodied …

  • Plastic Stirring Rod


  • RT Med Touch Stirs and Plate cover

    Thermo Scientific

    …our low profile digital display stirrer, ideal for routine stirring applications where visible stir speed is required. FEATURES Digital control Gradual start-up stirring to prevent splashing Designed for stir rod support Low profile lightweight design with small footprint…

  • Cimarec Basic Stirring Hot Plates

    Thermo Scientific

    …and alkali Rugged cast aluminum body provides stability and durability Adjustable stirring speed range from 100 and 2500 rpm Stirring models include a TFE-coated stir bar Integral ring-stand holder accommodates 0.5” (1.3 cm) diameter support rod All models come with a 24-month warranty

  • Borosilicate Glass Stir Rods

    GSC International, Inc.

    Borosilicate Glass with Fire Polished Ends

  • Stirring Shaft, Unground, 9mm

    Ace Glass

    Unground, 9mm OD stirring shaft design for use with our 9528 vacuum and debris free stirrer assembly. 380mm straight section, 416mm overall length. Use our 9530-08 blade.

  • Scienceware® SpinBar Flexible Magnetic Stirring Bar Retrievers

    Bel-Art Products

    Flexible, Teflon® rod with a powerful Alnico Teflon® coated magnet for retrieving magnetic stirring bars from containers or non-magnetic sink drains and traps. Flexible white rod is 33cm (13") long Autoclavable

  • Scienceware® Stirring Bar Retrievers

    Bel-Art Products

    Easily recover stirring bars from containers using the Spinbar® Magnetic Retriever. Offered in two different lengths (12" and 18"), each retriever has a polyethylene rod, 9.5 mm diameter, with Alnico magnet sealed in one end and loop on opposite end.

  • Stirring Rods for PerkinElmer Lambda 10/20/40


    Set of 15 pieces for stirring in the cuvette. For use with Research Peltier System - 6 Position (PTP-6), (L6310011) and 13-Cell Changer System (B0185210), and Magnetic Stirrer Accessory (B0507355).

  • Stirring Rods for PerkinElmer Lambda 10/20/40


  • Stir Rod Dairyware Acidity Test 10ml

    DWK Life Sciences (Kimble)

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.