Autoclavable Plastic Containers

Compare Tool

Select up to 3 products

Autoclavable Plastic Containers
1 - 32 of 72
Sort
View
Show
  • Cellulose Nitrate Membrane Filters, Type WCN

    GE Healthcare

    …techniques using aqueous solutions In clear, plastic boxes containing two plastic dispensers of 50 filters each Filters are interleaved with paper separators Each dispenser is labeled with pore size and filter diameter and has clear, plastic slip-on lid. White, Gridded, Sterile…

  • Polypropylene Wide Mouth Containers

    DWK Life Sciences (Wheaton)

    With attached polypropylene cap Durable container with good chemical resistance 30 to 1000 mL sizes Pre-attached caps available lined or unlined Autoclavable General storage containers are suitable for use with powders and solids.  The large surface area on these jars makes it easy to label,…

  • Chemware Teflon® PFA Wide Mouth Jars

    Saint Gobain

    …construction. Autoclavable with wide temperature range of -270°C to 250°C. Walls are translucent with ribs on four sides. Knurled cap has molded inner ring which seals against mouth of jar. Stackable. When heating or autoclaving, top should be removed or loosely set upon the container to avoid…

  • Wide Mouth Polypropylene Bottles

    Dynalon

    Excellent chemical resistance Easy-to-fill Autoclavable Leakproof Bottles and lids are constructed of translucent, rigid polypropylene. Unique closure design eliminates closure back-off. Easy pour container finish permits no-spill pouring.

  • Nalgene™ 50 Platinum-Cured Silicone Tubing

    Thermo Scientific Nalgene

    High-purity, translucent tubing contains no phthalate plasticizers or peroxides to leach out into transported fluid. Tasteless, odorless, noncytotoxic, nonpyrogenic, and nonhemolytic Autoclavable; also can be sterilized by gamma radiation, EtO and chemical procedures Durometer…

  • Large Cylindrical Polycarbonate Jars

    Thermo Scientific Nalgene

    Nalge 5300 jars with covers Completely transparent, multipurpose containers with high-impact strength Excellent for use as water baths, aquaria, terraria or freeze-drying chambers Autoclavable Usable at temperatures up to +135°C Walls are 3 mm thick; can be…

  • QuickTRAP™ Vacuum Protection System

    C.B.S. Scientific

    …disconnect fittings. Hydrophobic PTFE filter with PP housing stops overflow into vacuum source.  Heavy duty Nalgene polyethylene bottle liquid storage containers, chemically resistant and autoclavable.  Closures hvae TPE gaskets. All plastic construction eliminates implosion hazard. 

  • Borosilicate N-51a Glass Tissue Culture Tubes

    DWK Life Sciences (Kimble)

    …and are sold in cases containing 4 shelf packages of 250 tubes. 9215D65 Tube takes size 18-415 cap and is sold in cases containing 2 shelf packages of 250 tubes. 9215E18, E26 and E34 caps are of black phenolic plastic with cemented rubber liner and are autoclavable. 9215E52 caps are polypropylene,…

  • Scienceware® Poxygrid® Bench-Top Biohazard Bag Holder Kit

    Bel-Art Products

    … Snug fitting polypropylene plastic cover helps hold the bag securely in place Reusable; can be cleaned by hand or in automated dish washers; autoclavable. Cover provides compliance with 29 CFR 1910.1030(d)(2)(xiii)(A), which requires a cover on any container used to store, transport, or ship…

  • Diamond PRO Pipette, Fixed Volume

    Globe Scientific

    …year warranty. High accuracy and precision guaranteed Streamlined tip ejector designed for access to narrow necked containers and tubes Autoclavable tip cone and lower section assembly Ergonomic, lightweight and soft plunger movement minimizes fatigue Two step plunger operation…

  • Sharps-A-Gator™ General Purpose Sharps Containers

    Covidien

    …Safe and efficient sharps disposal Nestable, easy to assemble Safe to incinerate or autoclave plastics and pigments. Secure and convenient container mounting for space efficient storage. Containers available in a wide variety of sizes with clear, locking tops and horizontal load openings.

  • DiamondPRO™ Adjustable Volume Pipettor

    Globe Scientific

    …year warranty. High accuracy and precision guaranteed Streamlined tip ejector designed for access to narrow necked containers and tubes Autoclavable tip cone and lower section assembly Ergonomic, lightweight and soft plunger movement minimizes fatigue Two step plunger operation…

  • Multi-Purpose Containers with Rotor & Hinged Opening Lid

    Covidien

    … Nestable containers save valuable storage space Available holders and brackets secure containers wherever needed Plastics and pigments are safe to autoclave or incinerate For use on countertops or mounted on the wall Economical horizontal drop maximizes container volume Large…

  • Biohazard Disposal Can

    Bel-Art Products

    …benchtop or floor. All plastic parts are molded of polypropylene for durability, puncture resistance and to ensure sterility. The one piece hinged lid protects users from contact with the contents, helps to retain odors and contains airborne contaminants. 14 x 19" autoclave bags fit perfectly over…

  • Thomas PP Narrow Mouth Bottles

    Thomas®

    … Thomas polypropylene (PP) narrow mouth bottles are ideal for lab applications requiring excellent chemical resistance. Bottles can be autoclaved at 121°C for 20 minutes with or without contents. Before autoclaving, set closure on top of the container without engaging the threads.

  • Poretics Polyester Membrane Filters

    GVS Filter Technology

    …except for strong bases. Naturally hydrophilic, they contain no wetting agents, plasticizers or other extractables. Neither cytotoxic nor bacteriocidal so cell studies can be perfromed by simply adding appropriate cell nutrients. Repeatedly autoclavable and no damage has been observed with sustained…

  • Tri-Stir Beakers

    Dyn-A-Med

    …graduated polypropylene construction Flat bottom for magnetic stirring (not for use on hot plates) Chemically resistant Autoclavable Constructed with sloping sides that allow nesting for storage Unique triangular flanged rim with notches forms three spill-resistant…

  • Cryo-Lazr-Tag™ Cryogenic Labels for Laser Printers, 1.28" x 0.5"

    GA International

    …a sheet format for printing with desktop laser printers. The plastic waterproof labels are specifically designed to permanently adhere to vials, microtubes, microplates, glass tubes, freezer boxes, plastic bags and other containers that will undergo long-term deep-freeze storage. The cryogenic…

  • Bio-Bin® Waste Disposal Containers

    Dynalon

    …Bio-bin Autoclavable. Use with #202065 Autoclave Sterility Tape Supplied with 2 x 2” Biohazard Waste Labels Reorder information printed on the Bio-bin Bio-bins are a new cost effective and convenient alternative to rigid plastic waste collection and disposal containers. Ideal…

  • TH Tissue Homogenizers

    Omni

    …soft or hard (frozen) tissue analysis Omni Tips™ are economical and can be disposed of after use or autoclaved up to 7 times No need to order multiple items, everything is contained in one package Omni TH Motor has a variable speed controller that allows for speeds of 5,000 to 35,000…

  • Elliptical (Egg-Shaped) Spinbar® Magnetic Stirring Bars

    Bel-Art Products

    …vessel contour. Particularly well suited for round bottom flasks; shape ensures complete mixing Offers minimal contact when used in plastic containers Egg shape provides pivot point without a separate ring or abrupt change in contour Magnet itself is egg-shaped encapsulated in FDA…

  • Transparent 6 Gallon PET Carboys

    Dynalon

    …gas permeability are important, ask for the Dynalon 6 Gallon PET carboy. Made from 100% pure food grade PET resin, the product contains no plasticizers or BPA. A wide 4 inch mouth provides easy access for cleaning, sanitizing and filling. Molded graduations mark the 5 and 6 gallon levels.…

  • Cryo-Lazr-Tag™ Cryogenic Labels for Laser Printers, 0.94" x 0.75"

    GA International

    …a sheet format for printing with desktop laser printers. The plastic waterproof labels are specifically designed to permanently adhere to vials, microtubes, microplates, glass tubes, freezer boxes, plastic bags and other containers that will undergo long-term deep-freeze storage. The cryogenic…

  • Square Bottle, PC With Blue PP Screw Closure

    Dynalon

    …unequaled in design or performance. The octagonal square shape provides and "Easy-Grip" for pouring. Transparent and autoclavable. Perhaps the best design of any plastic lab bottle. Use with aqueous solutions, storage of media- short term or for space saving (square) storage. The cap is…

  • Bio-bin® Spill Containment Trays

    Dynalon

    Ideal spill trays for autoclaving waste disposal containers such as the Dynalon Bio-bins Autoclave tray for other plastic or glass laboratory items Help contain accidental chemical spills in the laboratory Material: Polypropylene (PP) 3/16" double-welded construction Tested in…

  • Multi-Purpose Sharps Containers

    Covidien

    … Nestable containers save valuable storage space Available holders and brackets secure containers wherever needed Plastics and pigments are safe to autoclave or incinerate For use on countertops or mounted on the wall Economical horizontal drop maximizes container volume Large…

  • Scienceware® 28-Piece Fittings Kit

    Bel-Art Products

    …are polyethylene and not autoclavable or FDA grade Kit contains: 6 Straight Tubing Connectors, 7 Stepped Tubing Connectors, 5 Wye (Y) Tubing Connectors, 3 "T" shaped Tubing Connectors, 5 Quick Disconnects and 2 flow control Plastic Tubing Clamps Plastic organizer box has room for…

  • Autoclavable Biohazard Bags, 2mil

    TufPak

    …The most widely used container of such waste is plastic bags. State regulations demand the proper handling and disposal of such waste. Within these regulations are clear specifications for the film from which such bags are made. In all cases, proper containment of hazardous infectious…

  • E-Cube Culture System

    Corning

    …plugs; 2 interlink injection sites; 1 sleeve of blunt plastic cannulas and 3 1.0” ID x 1.25” OD, 1/8” thickness O-rings. 45 mm Polypropylene cap is autoclavable and comes with two 15.24 cm stainless steel tubes. Cap fits Corning glass and plastic vessels with GL45 mm threads.

  • Cylindrical Spinbar® Magnetic Stirring Bars

    Bel-Art Products

    …bar to the vessel, reduces friction and lessens marring of plastic containers Alnico magnet encapsulated in FDA Grade, USP Class VI Teflon® PTFE low friction coating; durable and inert Manufactured in a registered ISO 9001:2008 facility, as verified by SGS certification Autoclave safe

  • Graduated Polycarbonate Erlenmeyer Flasks With Screw Cap

    Thermo Scientific Nalgene

    …are autoclavable, but polycarbonate shows some loss of mechanical strength after repeated autoclaving Closure size (mm): 50 mL has size 24; 125 mL has size 33; 250 mL has size 38; 500 mL has size 43; 1,000 mL has size 53. NOTE: before autoclaving, set cap or closure on top of the container

  • Syringe Type Membrane Filters

    Thermo Scientific Nalgene

    … Units are especially useful in critical applications requiring low contamination levels. Nylon membrane is inherently hydrophilic, contains no plasticizers or wetting agents and has low levels of extractables. Non-sterile Cellulose Acetate - Surfactant-free (4618R53) 25 mm diameter…

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.