The ideal solution for biohazard or non-hazardous waste. REDUCE Cost, Weight, Transport, CO2 Emissions, Storage Space. Space efficient, light weight fold-flat design Built-in lid and handles Temporary & permanent seals Stackable post use. UN 3291 Approved Printed user…

Our stir bars feature ALNICO V magnetic cores which are one of the most powerful permanent magnet alloys available. Stir bars should not be stored in a random mass, or dropped on a hard surface especially steel. Stir bars should be stored in pairs to maintain magnetic strength.

MultiCan® Barrier Containers offer a six-layer multilayer technology makes this container a perfect fit for oxygen-sensitive contents and for liquids tending to permeate, such as for example non-polar hydro-carbon compounds. MultiCans feature an Antistatic outer layer and has a recycling code…

Stir Bar Egg-Shaped 3/8X3/4" (1210D76 ) Product Dimensions (l x w x h) : 0.785x0.397x0.4in PTFE 20 mm length   Stir Bar Egg-Shaped 1/2X1" (1210D77 ) Product Dimensions (l x w x h) : 1x0.511x0.515in PTFE 25 mm length Stir Bar…

Plastic snap cap vials are molded of rigid-wall FDA compliant styrene with tight fitting polyethylene snap-on caps. Plastic snap cap container vials are excellent for storing dry materials, powders, tablets, etc. There are approximately 16 drams per fluid ounce. 7 dram size may be used with…

Polyethylene bottles and spouts come with sealer caps Spout openings standard .030 inches, can be enlarged by cutting with scissors Sealer snaps on easily after using and gives tight seal 15 mL bottles are furnished with size 15 caps; 30 and 60 ml bottles with size 18 caps; 120, 180 and 240 ml…

Straight Tubing Connectors. Excellent chemical resistance, autoclavable  polypropylene, serrated connecting surfaces to prevent  tubing slipping, and adapters allow for connecting different diameter tubing.

Micro Color-Coded Stirring Bars come in 3 different colors (red, yellow and blue) and various Polytetrafluoroethylene lengths. Colored stir bars may leach in harsh chemicals.

Shaft Stirrers/Blades Unaffected by virtually all chemicals PTFE construction Unbreakable and will not scratch vessels Usable to 260°C Of virgin PTFE, immune to most chemical attacks (except molten alkali metals). Excellent anti-adhesion properties promote thorough…

Holds a vacuum of 740 mm of Hg for 24 hours Lightweight and shatterproof vacuum desiccator; lid of transparent polycarbonate Removable pan holds calcium chloride or other drying agents; is non-corrosive Does not include desiccant or plate.

High-density polyethylene bowl with securely welded solid handle Handy for sampling and dispensing corrosive liquids Available in a variety of sizes

Test Tube Supports for 10, 13, 16 mm tubes. Acrylic units have clear shelves with white sides and bases.

Stirring rods are available in two versions: Pure PTFE solid stirring rod with tapered end, and pure PTFE stirring rod with mild steel core. The stirring rod version with steel core can be bent into a permanent shape. Inert and will not scratch, use up to 280°C.

These low density polyethyelene dispenser bottles  feature a graduated clear PMP measuring cup that slides  up and down on the vertical polyethylene tube for  easy adjustment. The variation in height determines  the volume to be dispensed. The cup is filled by squeezing…

This sturdy stand is fabricated of 3/8" clear  acrylic adding style and function to a normally wall mounted rack. The 4.5 lb stand includes all hardware needed to attach to the 5918-0000 drying rack and also comes with a 5' section of our 1085-0012 vinyl laboratory tubing. Further,…

Versatile 3/8" full gauge acrylic Beta shield provides enclosed three sided stand alone protection as well as convenient fold-away storage. May also be used as U-shaped shield. Combine with 1212V21 to create a full four sided enclosure. Dimensions: 16-1/2" H with 14" front and…

These low density polyethylene bottles are supplied with a bellow-type dropping pipette. Pipettes are graduated for nominal indication of amount of liquid being drawn. Bellows-shaped bulb makes use easy and provides excellent drop formation.

Lab Tissue Dispenser, Small (1212V42) Product Dimensions (l x w x h) : 5x5.125x3.375in For small Kimwipe boxes. Acrylic clear holder adds extra weight for one-hand dispensing of Tissue Wipes. Wall or bench mount with either two strips of double sided tape or mounting screws (not…

Product Dimensions (l x w x h) : 0x1x2.25in Vials. Hinged Snap Cap. General purpose 25ml low-density polyethylene container with push-in friction fit hinged lids. Dimensions:  55mm H x 30mm Ø. Withstands temperatures up to 80°C.

Check Valve ( 1211Z01 ) Product Dimensions (l x w x h) : 2.75x0.75x0in Polypropylene, large. Valve prevents the reverse flow of the liquid when the pressure is interrupted.  Useful for any tubing system on vacuum line. Large size valve will fit tubing 12-13-15 mm (7/16 " to…

Product Dimensions (l x w x h) : 7.625x1.072x1.349in Sampler/Ladle 10 mL. This sampler-ladle is made from pure polytetrafluoroethylene and is supplied with a fixed 6" (150mm)  handle. Totally inert. 10 mL capacity. Dimensions:  top ID 1" and bottom OD is 3/4".

Desiccator Plate 141 mm Product Dimensions (l x w x h) : 0x5.55x0.25in Polyproplene Desiccator plates fits item (3756D10).   Desiccator Plate 190 mm Product Dimensions (l x w x h) : 0x7.5x0.25in Polyproplene Desiccator plates fits item (3756D20).   Desiccator…

Equal Angle "Y" Tubing Connectors. Excellent chemical resistance, autoclavable polypropylene, serrated connecting surfaces to prevent tubing slipping, withstands flows to 20 p.s.i.

Plastic powder funnels feature a wide stem and are autoclavable. Powder funnels are translucent and allow for the passage of larger particles. Economical, fast and efficient powder funnels. Set contains 2 each sizes: 65, 100, 150. All sizes of 342555 series powder funnels except…

Leakproof bottles are ideal for a wide range of liquids and solids High performance polypropylene bottle with polypropylene screw cap Autoclavable Wide mouth for easy filling Wide mouth bottles, constructed of high-clarity polypropylene, are available in a full range of sizes…

General purpose  containers with push-in friction fit hinged lids.  Lightweight, wall thickness approximately 1MM. Withstands  temperatures up to 80° C.

Product Dimensions (l x w x h) : 0x10.75x5.25in Merit Water Still (3915N02) Replacement Condenser. 

"T" Tubing Connectors. Polypropylene . Excellent chemical resistance, autoclavable polypropylene, serrated connecting surfaces to prevent tubing slipping, withstands flows to 20 p.s.i.

Autoclavable, polypropylene, heavy-duty construction Stylish, octagonal square shape Choice of three sizes A new range of high performance, large bottles and carboys come in a choice of 5, 10 or 20 liters. The stylish, square octagonal shape provides for increased rigidity when…

Adhesive tape for use with dry heat sterilization. Use these tapes to enhance confidence that sterilization has occurred. Color changes from white to brown. Conforms with ISO 11140/2005

Contamination-free stirring-price justifies single use Four convenient sizes Disposable price Resistant to virtually all chemical attacks High-quality stirring bars molded with strong magnets permanently coated with white PTFE. Available in the four most popular sizes to…

Product Dimensions (l x w x h) : 6x0.17x0.687in Double Spatula. These polyamide spatulas are glass fiber reinforced and are available in double  spatula or a spatula spoon combination style. Polyamide  is a very strong material with good chemical resistance  against solvents,…