Corning, Supplies, Tubes
-
These PYREX® culture tubes are supplied with phenolic caps to facilitate handling and sealing after autoclaving. Caps are fabricated from a special formula resistant to the effects of temperature and steam in autoclaving and are provided with a Polytetrafluorethylene (PTFE) interface firmly…
-
These disposable Corning® caps are made from phenolic resin and are autoclavable at 121°C. Caps are provided with a white rubber liner.
-
Falcon® Cell Strainers
CorningA faster and easier alternative to gauze filtration in procedures involving dissociation of cells from either clumps or primary tissues Consistently obtain a more uniform single-cell suspension Three nylon mesh pore sizes for optimal performance in a…
-
These 15mL PYREX® conical centrifuge tubes have white enamel graduations. The 15mL sizes are graduated upward from tip in 0.1mL divisions.
-
PYREX Goetz Centrifuge Tubes
CorningWithout stopper, pear shaped 58 mm o.d. x 159 mm long Lower stem graduations: graduated upward from 0 to 1 mL in .05 mL divisions Bulb graduations: from 1 to 5 mL in 1 mL from 5 to 50 mL in 5 mL from 50 to 100 mL in 10 mL divisions
-
Widely used and referenced in laboratory protocols Dual position snap-cap prevents sample loss with ease of handling Sterile, nonpyrogenicity tested to less than 0.1 EU/mL (Cat. No. 352008 nonsterile) The foundation for consistent research…
-
PYREX® Oil Centrifuge Tubes
CorningPear-Shaped In accordance with ASTM D 91, D 96; API Standard 2500 Capacity 100 mL Calibrated "to contain" Graduations: from 0 to 1/2 in 0.05 from 1/2 to 2 in 1/10 from 2 to 3 in 1/5 from 3 to 5 in 1/2 from 5 to 10 in 1 from 10 to…
-
These PYREX® culture tubes are supplied with phenolic caps to facilitate handling and sealing after autoclaving. Caps are fabricated from a special formula resistant to the effects of temperature and steam in autoclaving and are provided with a glued-in, white rubber liner. The white enamel…
-
Tube 40 ml
CorningThese heavy duty 40mL PYREX® conical centrifuge tubes are made with increased wall thickness for greater mechanical strength. In order to conform to outside diameter and overall length limitations imposed by centrifuge rotors and supports, it has been necessary to reduce the capacity these…
-
PYREX® Test Tubes
CorningWith lip Tubes 10 mm through 18 mm o.d. have marking spot. Listings indicate length x o.d. in mm.
-
Corning® 50mL Mini Bioreactor
CorningFeatures and Benefits Polypropylene tube with large marking spot to clearly identify tube contents and experimental parameters Polypropylene cap with 4 vents; hydrophobic membrane provides gas exchange Sterile, nonpyrogenic and RNase-/DNase-free .
-
These heavy duty 10mL PYREX® conical centrifuge tubes are made with increased wall thickness for greater mechanical strength. In order to conform to outside diameter and overall length limitations imposed by centrifuge rotors and supports, it has been necessary to reduce the capacity of these…
-
PYREX® Conical Centrifuge Tubes
CorningGraduated Capacity 50 mL Tube has white enamel graduations upward from tip to 10 mL in 0.5 mL divisions and from 10 to 50 mL in 1 mL divisions Tube length is 135 mm, o.d. 28 mm Round bottom tube with pour out spout for easy decanting Wall thickness approximately 1.5 mm; length…
-
Rated to 12,000 RCFPrinted graduations and writing area for sample identificationScrew caps can be closed with one hand. Sterile options are also available. RNase-/DNase-freeNonpyrogenic.
-
PYREX® VISTA Culture Tubes
CorningReusable PYREX rimless culture tubes offer greater convenience in plugging and rack storage. Ends are fire-polished. The 22 and 25mm o.d. tubes do not have marking spots.
-
These 50mL PYREX® conical centrifuge tubes have sharp, black enamel graduations and markings. The tubes are the same size and shape as our Nos. 8060 and 8080. They have precision formed tips and uniform walls throughout for a high degree of accuracy and mechanical strength.
-
Single use culture tubes are housed in easy-to-open, easy-to-use packaging. The three small sizes come in a dispenser arrangement while the larger sizes are bulk-packed. Culture tubes are made of borosilicate glass to reduce pH changes and contaminants that could potentially leach from…
-
Mini Tube Strip Caps
CorningAxygen® 1.1mL 96 well Mini tubes are designed to fit an ANSI/SLAS 1-2004: Microplates - Footprint Dimensions compatible rack and are designed to be sealed with 8-strip or 12-strip plug caps. Available in 0.65mL single MiniTube or 1.1mL single MiniTube and 8-tube or 12-tube strip…
-
Round bottom, with threaded neck; without marking spot Size 100 x 13 mm takes size 13-415 cap; other sizes take size 15-415 cap Cap is not supplied and must be purchased separately; see 9215F70 series Cases of 1,000 contain 4 packages of 250. Listings indicate length x o.d. in mm.
-
PYREX® Oil Centrifuge Tube
CorningGraduations etched in glass with broad red front In accordance with ASTM D 91, D96, D 893, D 1796; API Standard S01, S20, S27, 2500; ANSI Method Z11.8, Z11.16, Z11.30; Federal Test Method Standard No. 791, methods 310.4, 5412.2, 3003.5 Capacity 100 mL Graduations: from 0 to 1/2 in 1/20, from 1/2…
-
Unattached HDPE rim seal caps provide a tight secure seal Polypropylene Self-standing Sterile Withstands a maximum RCF of 20,000 xg
-
PYREX® Rimless Culture Tubes
CorningThese reusable PYREX® rimless culture tubes offer greater convenience in plugging and rack storage. Walls and bottoms are of uniform thickness. Ends are fire-polished.
-
Centrifuge Tube 15 ml
CorningThese 15mL PYREX® conical centrifuge tubes have white enamel graduations for durability. The 15mL size is graduated upward from the tip in 0.1mL divisions. The 50mL size is graduated upward from tip to 10mL in 0.5mL divisions, and from 10 to 50mL in 1mL divisions. The phenolic 15-415 GPI…
-
Graduated upward to 0.5 mL in divisions of 0.05 mL , from 0.5mL to 3mL in 0.1 mL divisions, from 3 mL to 5 mL in 0.5 mL divisions and from 5 mL to 100 mL in 1 mL divisions. Made with a 3 mm vent hole located 180° from the front of the tube. Tubes are for testing propane, butane and Isobutane mixtures.
-
Skirted, self-standing tubes with a conical bottom. Tubes are graduated at 1.0mL intervals and feature a large frosted writing area. Caps fit tubes securely for a leakproof seal. Sterile tubes come with caps attached. Transport tube comes with a blue cap Certified RNase, DNase, and…
-
These 40mL heavy duty PYREX® conical centrifuge tubes have durable white enamel graduations and are made to the same O.D. and length specifications as No. 8060, but with increased wall thickness for greater mechanical strength. In order to conform to outside diameter and overall length…
-
Centrifuge Tube 15 ml
CorningThese 15mL PYREX® conical centrifuge tubes have sharp, black enamel graduations and markings. The tubes are the same size and shape as our Nos. 8060 and 8080. They have precision formed tips and uniform walls throughout for a high degree of accuracy and mechanical strength.
-
Axygen® screw cap tubes feature a cap that provides a tight secure seal. Self standing screw top microcentrifuge tube with "O" ring cap Made of polypropylene Volume: 1.5mL Cap color: Red Pre-sterilized
-
These 50mL PYREX® round bottom, nongraduated centrifuge tubes have a No. 13 Standard Taper solid glass pennyhead stopper. Rockefeller Institute of Medical Research type.
-
PYREX® Replacement Inlet Tube
CorningThis specially designed PYREX® inlet tube is a replacement part for the PYREX® Cyanide Distilling Apparatus (No. 3350-C) Used in testing for soluble and insoluble cyanides in water. Cyanide as hydrocyanic acid (HCN) is released from cyanide complexes by means of a reflux-distillation…
-
Self-standing polypropylene transport tube comes with a blue cap Volume: 5mL; cap and tube material: virgin polypropylene Unassembled; non-sterile; autoclavable Provides a ‘leak-proof’ and reliable seal for critical sample storage Features a large, frosted writing area; …
-
Feature screw caps that provide a tight secure seal Sterile Attached cap with black silicone O-ring Withstands a maximum RCF of 20,000 x g