Chemglass, Clamps/Supports, Equipment
Benchmark BenchPress 2024 - Promos & Lab Favorites
Shakers, Incubators, Centrifuges, Balances, Rotators,
Vortexers, Dry Baths, Rockers and MORE!
Download the promotional brochure below learn more.
Benchmark BenchPress 2024 Promotional Brochure
Offers expire July 31, 2024
-
Lattice Support Shelf
ChemglassShelf can be attached to any lattice setup using the supplied CG-9250-01 clamp holder. Shelf is 9" wide x 10" deep and anodized green with a neoprene surface to prevent items from slipping off. The 1/2" square support rod is 7.5" long. Square support rod prevents shelf from…
-
Support Rings with Clamp
ChemglassSolid ring with built in clamp for attachment directly to support rod. Available in three sizes. Nickel plated zinc alloy.
-
Stainless Steel Support Stand
ChemglassFloor style stainless steel support stand made to accept 12 and 22 Liter CG-1539 half jacketed flasks. Stand is 67in overall height with a depth of 22in. Ring has a diameter of 8 1/2in I.D. and is 28in above floor level. Top of stand has a 39in reinforced riser to support overhead stirrers, clamps etc.
-
Support ring is constructed of 1/2" OD. PTFE coated stainless steel rod. Made with an opening for easy insertion of reactor with an 8in long rod for connection to lattice.
-
Benchtop Support Stand, Mobile
ChemglassFeatures 3/4" S.S. Pipe (1.050" OD) Uprights and Heavy Duty PTFE Coated Aluminum Fittings Provide Maximum Strength and Chemical Durability All S.S. Uprights are Passivated to Inhibit Corrosion Adjustable S.S. Shelf/Tray Supports Reactors from 250mL to 5L Single…
-
Support, Solid Tripod
ChemglassBase is made of cast iron with a baked black finish. Rod is 10mm O.D. x 600mm (24 ". Available in two sizes.
-
Clamps
ChemglassCLAMPS, BURET, Clamp will hold two burets from micro to 100mL. Spring loaded mechanism adjusts simply by squeezing, yet hold buret firmly in place. Mounts directly to standard support rod with built in hook connector. Constructed of epoxy coated aluminum with vinyl jaws. CHEMGLASS LAB CLAMPS,…
-
ChemRxnHub™ Dual Support Stand
ChemglassFeatures: S.S. Uprights and Heavy Duty PTFE Coated Aluminum Fittings Provide Maximum Strength and Chemical Durability. Supports TWO Reactors side by side from 300mL to 5L. Removable Polyethylene Spill Tray. Adjustable Middle Support Bracket is Vertically…
-
Pinch Clamps, Stainless Steel
ChemglassMade entirely of stainless steel. Part numbers CG-150-01 and CG-150-03 are supplied WITHOUT a screw type locking device. All other sizes have the screw type locking device.
-
PTFE Support Rings
ChemglassPTFE support ring used to support round bottom flasks or cylindrical reaction vessels.
-
Similar to CG-1947, support clamp is designed to fit just below the flange of all Chemglass Reactors and permits Reactor lid to be detached without removing the Reactor body from the support clamp. Improved clamp is hinged on one side to swing open and allow complete access to install/remove…
-
Flow control adapter for use with CG-1198 and CG-1199 chromatography columns along with CG-1200 reservoir. Adapter has a 0-4mm Chem-Cap® metering plug.
-
S.S. Clamps, ChemRxnHub™ Reactors
ChemglassReplacement S.S. reactor clamps for ChemRxnHub™ support stands.
-
Optional items are an 8” x 8” extension plate and a 18” high vertical support rod. PLEASE NOTE: ROD IS REQUIRED FOR ATTACHMENT OF EXTENSION PLATE.
-
-
Keck Clamps
ChemglassMade of Delrin®, the clamp is non-corrosive and will not scratch glass. Can be used to 140°C. Color coded for easy identification. SOLD IN PACKAGES OF 10.
-
Horseshoe Style Clamps
ChemglassHorseshoe shaped clamp used to connect CG-138 flat o-ring flange. Design allows clamp to be installed or removed easily. Made of cast aluminum with chemically resistant green epoxy coating. Three adjustable tension locking screws assure even clamping pressure.
-
Support, Chem-Jack, Lattice Mount
ChemglassLab Jack Features: Only support jack on the market that attaches directly to a 1/2" diameter vertical lab frame or lattice rod. Heavy gauge aluminum construction provides excellent rigidity and support. Fabricated to precise tolerances allowing smooth vertical adjustment. …
-
Safety Collars, Nylon
ChemglassDesigned to be placed on the stirrer shaft directly above the bearing. The collar provides protection against the stirrer shaft dropping and hitting the bottom of the vessel. The collar also acts as a dust cover and permits the stirrer to be positioned off the bottom of the vessel. Supplied…
-
Anodized Aluminum LabJacks
ChemglassLaboratory support jacks provide for stable height adjustment and support for items in the lab such as flasks, baths or hot plate stirrers. Top and bottom plates are constructed of anodized aluminum while the support mechanism is made of chrome plated steel.
-
Clamps, Sanitary, Heavy Duty, Single Pin
ChemglassSingle pin style heavy duty sanitary clamp made from 304 stainless steel. For use with our sanitary adapters.
-
ChemRxnHub™ Triple Support Stand
ChemglassFeatures: S.S. Uprights and Heavy Duty PTFE Coated Aluminum Fittings Provide Maximum Strength and Chemical Durability. Supports THREE Reactors side by side from 300mL to 5L. Removable Polyethylene Spill Tray. Adjustable Middle Support Bracket is Vertically…
-
Clamps, PTFE, Standard Taper Joints
ChemglassPTFE molded clamps with a steel core can withstand temperatures up to 250° C and are totally chemically resistant and inert.
-
Flask Support Ring, Rubber
ChemglassFlask support ring has a concave recess on top to support round bottom flasks from 250 to 500mL. 5-1/8" diameter.
-
Gaskets, Sanitary, PTFE/Elastomer Core
ChemglassGasket grafts a PTFE envelope to an EPDM elastomer core. Gasket will not creep or cold flow overtime so it maintians the integrity of its seal. Temperature range -73 to 177C.
-
Stainless Steel Springs
ChemglassStainless steel spring used to connect apparatus having hooks. All springs have an enlarged 1/4" ID loop at each end for easy connection to almost any size hook. Diameter of the coils on all sizes is 0.190". Length listed is the length between the loops.
-
Heavy Duty Clamp Holders
ChemglassHeavy duty epoxy coated alloy clamp has high tensile strength and corrosion resistance. Can be used to support stirrers, temperature monitors and condensers. Large hand knobs allow easy adjusment and secure clamping power. Useful wherever clamping at 90° is required.
-
Nylon Tubing Clamp Kit
ChemglassA great way to be prepared for your next clamping situation! Kit contains 5 each, of all 13 sizes, neatly organized in a polypropylene box with adjustable dividers.
-
Support Tubes, Stainless Steel
ChemglassThese support tubes are made of brilliant polished 304 stainless steel. They have good surface hardness and do not score from clamp binding screws. Tubes are 1/2" (13mm) in diameter, and are hollow, reducing weight to 1/2 of solid stainless steel rods while maintaining all the advantages of…
-
ChemRxnHub™ Support Stands
ChemglassFeatures: S.S. Uprights and Heavy Duty PTFE Coated Aluminum Fittings Provide Maximum Strength and Chemical Durability. Supports Reactors from 300mL to 5L. Removable Polyethylene Spill Tray. Adjustable Middle Support Bracket is Vertically Adjustable. It Accepts Our…
-
Support Rings, with Openings
ChemglassManufactured from steel wire and zinc plated, rings have an opening to permit items such as separatory funnels to be inserted without removing the support ring from the base. Available in three sizes.
-
Stainless Steel LabJacks
ChemglassSupport Jack provide for stable height adjustment and support for items in the lab such as flasks, baths or hot plate stirrers. Top and bottom plates are constructed of stainless steel while the support mechanism is made of chrome plated steel.