SP Bel-Art, Bottles
-
Octagon Spinbar® Magnetic Stir Bars
SP Bel-ArtOctagon magnetic stirring bars with integral pivot ring are the most commonly used shape. Alnico magnet encapsulated in FDA Grade, USP Class VI Teflon® PTFE low friction coating; durable and inert Interrupted profile provides greater surface area and added turbulence when compared to…
-
MCT/PCR Rack
SP Bel-ArtPerfect for benchtop use or freezer storage, this compact, double-sided polypropylene rack accommodates 0.2ml thin-walled PCR tubes on one side while the opposite side holds 1.5ml to 2.0ml microcentrifuge tubes. 80 wells on each side keep tubes upright in a 5 x 16 array and are numbered for …
-
Right-to-Know Safety-Labeled Wash Bottles feature a wide mouth 53mm (2") for easy refilling. Bottles are pre-printed with the Chemical name and formula, the National Fire Protection Association (NFPA) Section 704 Four-color Diamond, health hazards, Chemical Abstract System (CAS) number, and…
-
Scienceware® Floating Cryotube Rack
SP Bel-ArtPolypropylene Autoclavable 20 places Rack accepts 12mm tubes Rack can be used for holding cryotubes during work or incubation. It floats in water and can be used for quickly thawing frozen cells in a water bath. Rack has handle for easy handling. The filled rack unloads easily by…
-
Scienceware® Sample Thief
SP Bel-ArtThis hand controlled tool allows users to take liquid samples at specific depths. Simply place thumb over top hole, insert to desired depth, remove thumb to allow liquid to enter the tube, place thumb back over tube to prevent liquid from moving in or out, and remove. Polyethylene plastic…
-
Scienceware® Flowmi™ Cell Strainers
SP Bel-ArtScienceware® Flowmi™ Cell Strainers provide fast and efficient filtering of small volume samples (up to 1000µl) and are unmatched at preserving sample volume. These sterile, 40µm or 70µm porosity strainers remove cell aggregates and create uniform single cell suspensions…
-
Scienceware® Economy Dippers
SP Bel-ArtFor convenient sampling from tanks, vats, streams, ponds, lakes, etc., these economy dippers are lightweight, easy to use and portable. Thread on 500mL (16 oz.) polypropylene cup can be exchanged to reduce cross contamination Two pouring spouts on cup allow left or right pouring …
-
Bel-Art® Poxygrid Test Tube Racks
SP Bel-ArtChoice of Four Colors and Multiple Sizes Chemical and corrosion-resistant steel wire racks are coated with heat-cured epoxy. Orange racks can be used for biohazard warning, yellow for radioactive warning. Epoxy coatings are unaffected by organic solvents, salts, weak acids and weak…
-
Heavy duty bars for use in stirring large volumes of fluid in vessels on large magnetic stirring machines such as the Cool Stir Large Volume Stirrer, H37028-0001 or other large machines. Will fit into vessels with a minimum neck diameter of 32 mm Multifaceted surface adds turbulence…
-
Scienceware® Microtube Rack
SP Bel-ArtRound-holed Stackable, autoclavable White, polypropylene rack takes 72 centrifuge tubes in 6 rows of 12. Molded cutouts in end panels form handles. 2591C58 and C60 hold 400-500 µL tubes and are 9” L x 4 3/8” W x 4 3/8” H. 2591C62 and C64 hold 1.5 mL tubes and are…
-
Scienceware® Pipette Pump III
SP Bel-ArtSuperior design for better pipette visibility and more precise dispensing User-friendly shape for maximum comfort Lightweight for easy, one-handed use Compact design is ideal for working in hoods or glove boxes Ergonomically designed for comfort and simplicity, the Pipette Pump III has a…
-
Sterileware Cross-Sectional Liquid Samplers
SP Bel-ArtThe integrated valve of this sterile tool closes as it is pushed against a container bottom securing the sample for withdrawal. Sample can then be poured from the top of the tool into your sample container. Provides effective cross-sectional sampling of liquids and light creams Reaches…
-
Scienceware® Hydrometer Racks
SP Bel-ArtPolypropylene racks Top and middle plates have 25 mm diameter holes; bottom plate has wells tapering from 25 to 9 mm to hold hydrometer bulb Overall height is 251 mm Steam autoclavable at 121°C 6040A10 has top plate of 143 mm high for short hydrometers
-
Scienceware® Spinbar® Restrainer
SP Bel-ArtHolds on to magnetic stirring bar Easily retrieve magnetic stirring bars from vessels with the handheld Spinbar® Restrainer. Don’t lose magnetic stir bars down lab drains and eliminate the splashing hazard when pouring out of mixing containers. The tool fits comfortably…
-
Translucent flexible bottles with leakproof design and matched polypropylene closures offer greater visibility than HDPE bottles. Perfect for sampling and general storage of liquids, powders or viscous fluids Bottles 250mL (8oz) and larger feature recycling code molded into base
-
Spectro Cell Rack
SP Bel-ArtWells hold standard cells with a 12.5mm cross-section; however, some plastic cells may not fit. Steam autoclavable at 121º C (250º F). Overall dimensions 209 x 70 x 35mm (8 1/4" x 2 3/4" x 1 3/8 "). Polypropylene rack holds twenty 10mm lightpath Spectrophotometer cells in numbered wells The…
-
Precisionware® Wide Mouth HDPE Bottles
SP Bel-ArtRigid high-density polyethylene, laboratory/pharmaceutical grade bottles have matched polypropylene closures and leakproof design. FDA compliant material Wide mouth design simplifies packaging and storing of liquids and powders Bottles 250ml (8oz) and larger feature recycling code molded…
-
Scienceware® Safety Acid/Caustic Samplers
SP Bel-ArtExcellent for sampling from tank cars, tank trucks and barges, these samplers are well suited for sodium hydroxide, potassium hydroxide, hydrochloric acid, acetic acid, formaldehyde, sulfuric acid, etc. Constructed of a 500cc (16oz) polyethylene bottle screwed onto a 10cm (4") long,…
-
Scienceware® Round Bottom Flask Support
SP Bel-ArtRound-bottom flasks of any size up to 10 liters are cradled securely in the stepped concentric rings of this holder. Can be stacked together for convenient storage Polypropylene plastic rack; not affected by spilled acids, alkalis or other corrosive liquids Steam autoclavable at…
-
NMR Sample Tube Rack
SP Bel-ArtPolypropylene rack is steam autoclavable at 121°C (250°F). Dimensions: 21cm x 11cm x 22cm H (8 3/8" x 4 ½" x 8 ¾"). Rugged and stable polypropylene rack is made specifically to support and safely store Nuclear Magnetic Resonance tubes. Upper deck has holes; lower deck has hemispherical wells to…
-
Triangular Scraper
SP Bel-ArtNo Metal, No Scratching, No Bending This plastic scraper has a rigid, chisel-edged, triangular blade that is tapered and fans out to a width of 11.1cm (4-3/8"). Handle is shaped for a comfortable and secure grip Made from white polypropylene that complies with FDA requirements…
-
Scienceware® Stainless Steel Spoons
SP Bel-ArtDouble-Ended with Two Bowl Sizes These double-ended, 304 stainless steel sampling spoons have a solid, rounded shaft. Available in plain polished stainless steel or coated with Fluo-Kem® Teflon® FEP FEP complies with FDA regulations governing direct food contact applications
-
Scienceware® Stack Rack® Test Tube Racks
SP Bel-ArtMatch Rack Material to Lab Use These sturdy, rigid racks feature interlocking end plates with handles for secure stacking when loaded with tubes up to 10cm (4") long. Rows are numbered and lettered for easy tube identification. All racks are steam autoclavable at 121°C (250°F). …
-
Vacuum Aspirator 1.0gal
SP Bel-ArtFor easy and continuous aseptic vacuum aspiration of a variety of liquids, including tissue culture media, supernatants, and chemical wastes. To use, simply insert a pipette tip, Pasteur pipette or serological pipette into the collection tube and connect vacuum line to vacuum source. …
-
Scienceware® Slide Mailer
SP Bel-ArtChemically inert, polyethylene container has a deep screw cap to provide maximum protection against breakage. Once cap is removed slides project 12.7mm (½") out of the jar for easy grip and clean handling. Internal grooves accept 5 to 10 microscope slides 25 x 75mm (1 x…
-
Constructed of a special blend of polypropylene, these autoclavable racks will sink in a water bath Interlocking feet allow racks to be stacked while not in use Racks feature end plates for labeling. Rows are numbered and lettered for tube identification. Outside dimensions: 9.7” x…
-
Adjustable Microplate Tilting Stand
SP Bel-ArtMinimize Pipetting Errors Make precise additions of liquid components to microplate wells by adjusting plates to the most convenient angle. The angular presentation of the plate and clear acrylic platform beneath allows you to easily judge which wells have received liquid addition by…
-
Spinvane® Triangular Magnetic Stirring Bars
SP Bel-ArtSpinvane® Magnetic Stirring Bars triangular shape is designed for small conical-shaped tubes and micro vials. Triangle shaped vane is made of solid FDA grade, USP Class VI Teflon® and has a cross-mounted, molded-in Alnico magnet Each size is manufactured for a specific size tube;…
-
Sterileware Powder Thief
SP Bel-ArtAvailable in two lengths each with four tip volumes, these sterile powder thieves easily sample from targeted locations within bulk powders. Used by pharmaceutical, food, cosmetic and chemical companies. Made from FDA and EU conforming materials; safe for food, drug and cosmetic use High…
-
Spinbar® Capsule Magnetic Stirring Bars
SP Bel-ArtThe Capsule Magnetic Stirring Bar is a polystyrene capsule containing a 30 x 8mm (1.18 x 0.31") polygon magnetic stirring bar that spins freely inside the capsule while being prevented from spinning off center and ‘wandering’ on the base of a vessel. Containment of the…
-
Double Spinfin® Magnetic Stirring Bars
SP Bel-ArtDouble Spinfin® Magnetic Stirring Bars agitate liquids in round bottom vessels such as test tubes, cylinders and flasks, where other stirring bars cannot be used. Fins on top and bottom ensure complete agitation Maintains its position in a vessel and will not wobble Alnico magnet…