Kemtech America, Ready to Ship
-
Synthware Inlet Adapters with Extended Length Lower Tubes
Kemtech AmericaSynthware inlet adapter with extended length lower tube. Allows for the introduction of reactants below the interior surface. Tube extends 153mm (6 inches) below the joint. Tubing has the same O.D. on both ends of the joint.
-
SYNTHWARE Stainless Steel Cannulas
Kemtech AmericaVarious lengths available, for the tranfer and handling of air sensitive materials.
-
SYNTHWARE Spin Vanes
Kemtech AmericaSpin Vane, Synthware, for 3.0 and 5.0 conical bottom mini vials, Magnet is encassed in PTFE.
-
SYNTHWARE Filtration Apparatus
Kemtech AmericaUsing 47mm membranes for filtering corrosive solutions, particulate removal from HPLC solvents, and filtration analysis with solid phase extraction disks. Support base has a sealed-in coarse porosity fritted disc. Complete assembly includes a 300mL graduated funnel, aluminum clamp, support base and…
-
SYNTHWARE West Condensers
Kemtech AmericaWest Condenser Joints: 14/20, 19/22, and 24/40 available Jacket Length: 110, 190, 200, and 300mm available Narrow annular space for fast collant speed thus high cooling efficiency.
-
Indentations at the bottom for supporting packing material. Jacket permits the column to be used as a condenser.
-
SYNTHWARE Clamp Bosshead
Kemtech AmericaClamp Bosshead, Synthware, For rods up to 15mm diameter, chrome plated finishwith plastic headed screws.
-
SYNTHWARE Double Vacuum/Inert Gas Manifolds
Kemtech AmericaGeneral purpose double bank manifold for use with vacuum and inert gas. Supplied with 0-4mm high vacuum valves for grease-free operation. Both banks are made from 22mm medium wall tubing and have all banks open. Ports are spaced 100mm center to center and have an O.D. of 10mm. 1164V31 Same to…
-
SYNTHWARE Erlenmeyer Flasks
Kemtech AmericaSYNTHWARE Erlenmeyer flask with standard taper outer joint. All sizes are hand blown from tubing to ensure heavy and uniform wall.
-
SYNTHWARE Immersion Thermometers with 10/18 Joint
Kemtech AmericaThermometer, Range°C -20 to 110, Synthware, Joint: 10/18, Various models availabe that are immersable to various depths, Non-mercury, Accuracy is ±1°C **NOTE THESE PRODUCTS COME IN DIFFERENT SIZES - WHAT IS PICTURED MAY NOT BE THE ITEM SOLD**.
-
SYNTHWARE Vacuum Manifolds, High Vacuum Valves
Kemtech AmericaWith a serrated hose connection (10mm O.D.) at left or right hand side. Main tube is 22mm O.D. and the distance between valves is 100mm center to center.
-
Cylindrical Magnetic Stir Bars
Kemtech AmericaCylindrical magnetic stir bar with pivot ring. various sizes available.
-
Synthware Distillation Adapters, 75°
Kemtech AmericaSynthware distillation adapter bent at 75 degrees. Both ends are standard taper inner joints and are the same size.
-
SYNTHWARE Microscale Reflux Solvent Still
Kemtech AmericaReflux Solvent Still, Microscale, Synthware, Capacity: 25mL, Joints: 14/20, Stopcock Bore: 2mm.
-
SYNTHWARE Kugelrohr Distilling Bulbs
Kemtech AmericaKugelrohr Distilling Bulb Capacity: 5, 10, 15, 25 or 50mL available Joints: 14/20, Bulb O.D.: 25, 31, 35, 42 or 48mm available Overall Height: 80, 85, 90, 98 or 105mm available Used in distillation of very small amount of distillate at lower temperature with high efficiency.
-
SYNTHWARE Liebig Condensers
Kemtech AmericaLiebig Condenser Jacket Length: 100, 120, 180, 200, 250, 300, 400, and 500mm Joints: 14/20, 19/22 and 24/40 available Hose Connection: 8 or 10mm With outer joint at the top and inner joint at the bottom.
-
Addition Funnel, Pressure Equalizing, PTFE Metering Stopcock, Synthware, Capacity: 10-500mL available, Top Joint (Outer): 14/20, 19/22, and 24/40 available, Bottom Joint (Inner): 14/20, 19/22, and 24/40 available, Stopcock Bore: 2 or 4mm.
-
Synthware Vacuum/Inert Gas Adapters
Kemtech AmericaAllows for flexible tubing to be connected to apparatus for introduction of vacuum or pressure. Hose connection is at a 90 degree angle to the standard taper inner joint.
-
SYNTHWARE Cold Finger Condenser with Drip Tip
Kemtech AmericaExtended offset lower tip for drop control.
-
SYNTHWARE High Vacuum Valves, Three-Way, PTFE-Protected
Kemtech AmericaHigh Vacuum Valve, Three Way, PTFE Protected, Synthware, Size: 0-8mm, Side Arm OD: 9mm.
-
SYNTHWARE High Vacuum Manifolds, Solid Glass Stopcocks
Kemtech AmericaWith 4mm double oblique, high vacuum solid glass stopcocks precision ground with corresponding numbers on barrel and plug. Solid glass stopcocks have constant pressure retention devices. Distance between stopcocks is 75mm center to center.
-
SYNTHWARE Short Path Vacuum Jacketed Distillation Apparatus
Kemtech AmericaVacuum jacketed design for more efficiency. When a thermometer is inserted in the top of this apparatus, the bulb and stem serve as column packing. The close coupled condenser and vacuum connection offer and extremely short condensate travel path. Used with 25mm immersion thermometer, and D27…
-
SYNTHWARE Distilling Heads for 76mm Thermometers
Kemtech AmericaThermometer joint is 10/18 for 76mm immersion thermometer. Side arm is at 75° angle.
-
SYNTHWARE Sure-Grip Separatory Funnels
Kemtech AmericaSeparatory Funnel, Sure Grip, Glass or PTFE Stopper, Synthware, Capacity: 500-2000mL available, Stopper Size: #27, PTFE Stopcock Bore: 4mm, Straight section between globe and stopcock provides a sure grip while shaking and also aids in clamping.
-
SYNTHWARE Friedrichs Condenser with Removable Hose Connections
Kemtech AmericaWith a joint at 15° angle. Supplied completely with Nylon® cap and hose connections.
-
SYNTHWARE Glass Extraction Thimbles
Kemtech AmericaExtraction Thimble, All Glass Available in multiple sizes (small, medium, large) Porosity: Available in Extra Course and Course All glass extraction thimble permits viewing extraction process and subsequent weighing.
-
Synthware Straight Drying Tubes
Kemtech AmericaSynthware straight drying tube. With top outer and lower inner standard taper joints of the same size.
-
SYNTHWARE Vertical Orientation Distrubution Adapter
Kemtech AmericaRotating distillation receiver allows four fractions to be collected. Vacuum adapter has a vertical orientation.
-
SYNTHWARE Solvent Distilling Heads
Kemtech AmericaSolvent Distilling Head Capacity: 250, 500, and 1000mL available Joints: 14/20 and 24/40 available Sampling Port: 14/20. Heads feature a 2mm double oblique stopcock bore
-
SYNTHWARE Round Bottom Flasks
Kemtech AmericaSYNTHWARE round bottom boiling flasks with full length standard taper outer joint. All sizes are heavy wall design and are hand blown from borosilicate tubing to ensure uniform wall thickness.
-
SYNTHWARE Buchner Filter Funnels
Kemtech AmericaBuchner Funnel, Fritted Disc Capacity: Multiple capacities available ranging from 2-600mL Disc OD: 10-90mm available Porosity: Xtra Course, Coarse, Medium, and Fine available Not recommended for filtration where pressure will exceed 15 psi
-
SYNTHWARE Microscale Erlenmeyer Flasks
Kemtech AmericaErlenmeyer Flask, Microscale, Synthware, Capacity: 5, 10, and 25mL available, Joint: 14/10, supplied with one compression cap, one Viton O-ring and one PTFE-faced silicone septum.