Separatory Funnel

Compare Tool

Select up to 3 products

Separatory Funnel
1 - 32 of 129
  • Glass Separatory Funnel Kits

    Across International

    Introducing the new Ai separatory funnel kits with all PTFE valves. A separatory funnel, also known as separation funnel, separating funnel, or colloquially sep funnel, is a piece of laboratory glassware used in liquid-liquid extractions to separate (partition) the components of a mixture into two…

  • Teflon® stopcock plug fits into the micro-finish barrel Plug reduces freezing problems and grease contamination

  • Separatory funnel featuring a PTFE stopcock and a PTFE stopper included. See Ace family 12632 for extra stoppers.

  • This borosilicate glass pear-shaped separatory funnel is supplied with a Standard Taper glass stopper and a Standard Taper glass stopcock.

  • Separatory funnels, from 125ml to 5 liter. These funnels feature a detachable PTFE drip tip which is not easy to break and is easier to keep clean. Ace-thred tip makes a leak tight connection without the need for an o-ring. Complete unit consists of th

  • Plastic Separatory Funnels

    Thermo Scientific Nalgene

    …non-wetting for complete draining Resists any chemicals used in a separatory funnel Constructed of Teflon® FEP with Teflon TFE stopcocks and Tefzel® ETFE screw closures. Closure and stopcock are leakproof. Funnels are autoclavable except for stopcock assembly, which can be…

  • Separatory Funnel, Standard Taper Joint Capacity: 10-250mL Available Joints: 14/20, 19/22, and 24/40 available PTFE Stopcock Bore: 2mm Supplied with PTFE stopcock and PTFE or glass penny-head stopper

  • Replaceable tip, Teflon® stopcock and high-density polyethylene stopper Designed for long life and maximum safety Economical - reduces costs by providing replacement components Stopcock assembly features a simple screw thread locking nut and collar which ensure that the stopcock…

  • These replacement 250mL PYREX® Squibb separatory funnels do not have a Teflon® valve assembly or glass stopper. For replacement glass Standard Taper stoppers, see No. 7650; for replacement Teflon® stopcock assemblies, see No. 7681.

  • Squibb style separatory funnel with a glass stopcock. Supplied complete with a flask length stopper of the listed size. For replacement stoppers see CG-3018.

  • Funnel Squibb Pear PTFE Stpk 2000ml

    DWK Life Sciences (Kimble)

    KIMAX funnel is supplied with a closed-bottom linear, high-density polyethylene stopper to fit in the ground neck, and polytetrafluoroethylene stopcock. Lower stems have an I.D. large enough that a column of liquid will "break" with the stopcock closed, thereby giving a more complete…

  • With Standard Taper glass stopcock and Standard Taper glass stopper 60 mm long stem, which drains completely after stopcock is closed

  • Supplied with a round glass stopper and a PTFE stopcock plug Lower stems have an i.d. that allows for more complete seperation and eliminates the necessity of emptying the funnel

  • Funnel 6000 ml


    These 6L PYREX® pear-shaped separatory funnels have glass No. 10 Standard Taper stopcocks and strong, hollow No. 38 Standard Taper glass stoppers. For replacement glass Standard Taper stoppers, see No. 7650; for stopcock plugs, see No. 7680; for retaining clips, see No. 7280.

  • Glass stopcock and glass stopper Stem length of 65 mm

  • Separatory Funnel, Sure Grip, Glass or PTFE Stopper, Synthware, Capacity: 500-2000mL available, Stopper Size: #27, PTFE Stopcock Bore: 4mm, Straight section between globe and stopcock provides a sure grip while shaking and also aids in clamping.

  • Squibb Separatory Funnels

    DWK Life Sciences (Kimble)

    Squibb-type with Standard Taper joint and stopcock Plain stem, but may be used with 179800 adapter. (Note stem diameter for a proper fit when using this adapter.) 636031 series is supplied without a stopper 636030 series is supplied with a glass stopper With an 821001 1:5 taper PTFE…

  • Takes from one to three separatory funnels size 60 to 250 mL Funnel stoppers are held in place by elastic bands. Three adjustable, rubber-covered yokes are used to secure funnels in holder. Spring- loaded release mechanism permits holder to be rotated about shank in 30° increments without…

  • Rotary Separatory Funnel Rack

    Bel-Art - SP Scienceware

    …rotary separatory funnel rack consists of a rectangular base, screw-in column and a support disc held in place by a screw clamp. Support disc is fully adjustable for different heights up to 21" Open front type support holes for easy removal and placement of separatory funnels

  • Scienceware® Separatory Funnel Rack

    Bel-Art - SP Scienceware

    The Scienceware® Separatory Funnel Rack allows the use of a variety of funnel sizes for a different experiments. With adjustable diameter funnel slots, this rack accepts funnel sizes from 100cc to 1000cc. In addition, the two support tiers can be independently adjusted to any height on long…

  • Lattice Lab System, Set #1

    United Scientific Supplies

    The Lattice Lab System is a lightweight flexible set of support rods and clamps that allows a wide range of lab apparatus to be assembled and securely supported. Assembly is easy and requires only a screwdriver. Support rods are made of hard aluminum and foot plates and hook connectors are made of…

  • Large capacity globe shaped separatory funnel with a choice of glass or PTFE stopcock. Stem length is approx. 130mm below the stopcock on all sizes. For replacement stoppers see CG-3018 for #38, CG-3000 for 45/50.

  • Separatory, globe type funnel with neck and section between globe and stopcock shaped to provide a secure grip for shaking contents or transporting. Funnel features a standard taper top joint and a glass stopcock plug. For replacement glass stopcock pl

  • Plastic Separatory Funnel Holder

    United Scientific Supplies

    This non-corrosive separatory funnel holder, molded in PP, has a front opening which provides clear view of the solution and allows unobstructed placement of separating funnels. Two tapered wedges are provided to ensure firm grip on rods measuring 1/2" or 3/8" diameter.

  • These replacement 60mL PYREX® Squibb separatory funnels do not have a Polytetrafluorethylene (PTFE) valve assembly or glass stopper.

  • Utilizes PVC-coated borosilicate glass, which helps contain glass and contents should breakage occur Chemically and thermally resistant Excellent optical clarity Mechanically durable Autoclavable or microwaveable at 121°C (250°F)

  • Separatory funnel featuring a glass stopcock and a PTFE stopper included. See Ace family 12632 for extra stoppers.

  • Glass Seperatory Funnel

    United Scientific Supplies

    Separatory Funnel, conical Shape with PTFE Stopcock and Plastic Stopper.

  • Teflon® stopcock plug and Standard Taper polyethylene stopper Stem length of 65 mm PYREX® borosilicate glass body

  • Glass Separatory Funnels

    GSC International, Inc.

    These Separatory Funnels are made from quality borosilicate glass, and come with a glass stopcock. They are commonly used in liquid-based extractions to separate the parts of the mixture into two solvent phases of different densities. PRODUCT WARNINGS WARNING: This product can expose…

  • The funnel holder will accommodate up to three funnels at once, depending on size, and can hold funnels as large as 500 ml. You can mount one or two of these holders on the shaker base. Just load the funnels with the stopcock down, adjust to the desired shaking position, and turn on the shaker. The…

  • Separatory PTFE Stopcock Funnels

    GSC International, Inc.

    These borosilicate glass Separatory Funnels have a PTFE stopcock and come with a ground glass stopper. They are commonly used in liquid-based extractions to separate the parts of the mixture. We offer various sizes. PRODUCT WARNINGS WARNING: This product can expose you to chemicals…

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.