SP Bel-Art, Ready to Ship
-
Scienceware® Write-On™ Label Tape
SP Bel-ArtAdheres to any clean surface, including Teflon® fluoropolymer resin coated materials, and peels off without leaving a sticky residue. Pencil, ball-point pen or solvent ink marker remain legible under the most demanding laboratory conditions. Colored paper with rubber resin adhesive…
-
Cylindrical Spinbar® Magnetic Stirring Bars
SP Bel-ArtCylindrical magnetic stirring bars offer excellent centering and smooth running characteristics. Small removable pivot ring in the center adds to their versatility Pivot ring minimizes the contact area of the bar to the vessel, reduces friction and lessens marring of plastic containers …
-
Teflon-Coated, Polygon Spinbar Stirring Bars
SP Bel-ArtCylindrical alnico magnet sealed in polygon-shaped Teflon shell
-
The Original Hot Hand® Protector
SP Bel-ArtHot Hand® Mitts provide superior protection when handling hot or cold objects, including dry ice. Withstands temperatures as high as 260°C (500°F) Remains flexible at temperatures as low as -57°C (-70°F) Soft, compliant silicone rubber naturally conforms to hand…
-
Right-to-Know Safety-Labeled Wash Bottles feature a wide mouth 53mm (2") for easy refilling. Bottles are pre-printed with the Chemical name and formula, the National Fire Protection Association (NFPA) Section 704 Four-color Diamond, health hazards, Chemical Abstract System (CAS) number, and…
-
Scienceware® Long-Handled Dippers
SP Bel-ArtFor easy sampling from tanks, vats, lakes, etc., these high-density polyethylene plastic dippers will not rust or corrode, provide excellent chemical resistance and float, “just in case.” Handles are 2.9cm (1-1/8”) in diameter and welded to a rigid sampling bowl at a…
-
Full-View Test Tube Supports
SP Bel-ArtHold More Tubes, Waste Less Space This versatile polypropylene rack has pins for supporting or draining test tubes. Stores test tubes upright, full or empty Holds inverted test tubes over pins for draining The rack with 102 pins, 5 x 16 rows (9259G50), is excellent for drying…
-
Scienceware® Flowmi™ Cell Strainers
SP Bel-ArtScienceware® Flowmi™ Cell Strainers provide fast and efficient filtering of small volume samples (up to 1000µl) and are unmatched at preserving sample volume. These sterile, 40µm or 70µm porosity strainers remove cell aggregates and create uniform single cell suspensions…
-
Safety-vented * wash bottles provide compliance with the Globally Harmonized System of Classification and Labeling of Chemicals (GHS) and OSHA's HazCom 2012 requirements - as pertains to "Workplace Labels." Pre-printed with the chemical name and formula, GHS pictogram and…
-
Spinbox™ Magnetic Stirring Bar Assortments
SP Bel-ArtThese stirbar assortments come in a convenient storage box and provide instant availability of these highly popular Teflon® PTFE encapsulated Alnico magnets. Choose from Octagon, Cylindrical, Polygon, Micro, Egg-Shaped or Spinplus® shaped assortments FDA Grade, USP Class VI…
-
Sterileware Jumbo Sampling Pipettes
SP Bel-ArtThese sterile Jumbo Pipettes are ideal for sampling from narrow- or wide-mouth containers up to 208-liter (55 Gallon) drums. Reaches into container while keeping hand clear of contents Diameter allows for use through drum bunghole or other small openings Color-coded end helps prevent…
-
Low-density polyethylene wash bottles offer different colors of polypropylene closures for quick, at-a-glance identification of contents. Choose from Natural, Red, Yellow, Blue or Green caps.
-
Magic Touch 2™ Lab Ice Pans
SP Bel-ArtSuperior insulating properties combined with high chemical resistance make Magic Touch 2™ Ice Pans compatible not only with wet ice, but also with ultra-low temperature materials including dry ice, salt slurries, dry ice methanol slurries, or liquid nitrogen. Expanded urethane…
-
Scienceware® Pipette Pump III
SP Bel-ArtSuperior design for better pipette visibility and more precise dispensing User-friendly shape for maximum comfort Lightweight for easy, one-handed use Compact design is ideal for working in hoods or glove boxes Ergonomically designed for comfort and simplicity, the Pipette Pump III has a…
-
Scienceware® Straight Tubing Connectors
SP Bel-ArtThese straight fittings ensure a tight, secure connection between lengths of tubing having the same inner diameter (I.D.). Chemical-resistant polypropylene plastic for use with a wide range of liquids or gases. FDA-grade for direct contact with food, drugs, and cosmetics Autoclavable …
-
Scienceware® Quick Disconnects
SP Bel-ArtConnect same or different size tubing with these polyethylene plastic connectors. Ideal for vacuum applications, water lines, manometers, and more 1226C59 & 9583M13 (F19730 series) connects same size tubing 9583M43 (F19731-0552) connects different size tubing
-
Scienceware® Polycarbonate Hydrometer Jar
SP Bel-ArtClear, unbreakable polycarbonate cylinder has a 245ml capacity and is 3.3cm I.D. x 30.5cm H (1?” x 12”) with removable 4” polyethylene base. Hydrometer not included.
-
Scienceware® Chemical Containers
SP Bel-ArtTrusted to Transport Dust from the Moon Great for storing small quantities of liquids or solids Heavy-walled, injection molded polyethylene jars Easy-to-clean Screw cap design with leakproof inner seal
-
Scienceware® Ergopet® Powered Pipettors
SP Bel-ArtLower the sash and strain with battery powered mobility Rechargeable battery power provides the freedom of portability Swiveling head can be positioned straight ahead in-line with the hand or rotated up to 90° left or right, permitting an unobstructed view of the meniscus and…
-
Scienceware® Positioner-Retriever, PE
SP Bel-ArtSet the Spinbar® Magnetic Stirring Bar precisely where it is wanted with no splash using the Spinbar® Positioner/Retriever. Just as easily, retrieve stirbars without coming into contact with the liquid in the container. For recovering a Spinbar® Magnetic Stirring Bar, keep the…
-
Easyplate™ 100mm Petri Dish Racks
SP Bel-ArtPerfect for Use in an Incubator Increase workspace and efficiently transport large quantity of Petri dishes. Available in 4 colors and two sizes; the 24.1cm (9-1/2") high size holds forty-eight 100mm Petri dishes, and the 36.8cm (14-1/2") high size holds eighty-four 100mm Petri…
-
Micro (Flea) Spinbar® Magnetic Stirring Bars
SP Bel-ArtMicro (Flea) magnetic stirring bars are designed for stirring small volumes in vessels such as vials, tubes and gradient makers. Particularly useful for environmental testing and life science applications in which small sample volumes need to be prepared and evaluated Alnico magnet…
-
Scienceware® Tubing Clamps
SP Bel-ArtScrew Clamp Offers on/off and fine control so accurate it replaces stopcocks in many applications Can be installed without disconnecting tubing Molded of Delrin® plastic Clamp is autoclavable and resistant to acids, alkalis and organic solvents Accepts flexible tubing up to 14mm…
-
Cryo-Safe™ Vial Storage Box
SP Bel-ArtCan be used to transfer or ship vial or tubes. Rugged polycarbonate boxes withstand temperatures of -196°C to +121°C Select box to hold 1.2, 2.0 or 5.0 ml cryogenic vials Transparent lids are keyed for alignment and include numbering grid for sample identity 1222X70 Place: 25 Dimension:…
-
Used for flow measurements in the lab, process flows in pilot plants, metering carrier gases in chromato graphy, indicating and controlling gases in manufacturing processes and for indicating flow rates in pumping or flow systems. Formed from heavy-walled, shock-resistant borosilicate glass, these…
-
Scienceware® Bulb Pipettor
SP Bel-ArtSaves time and eliminates mouth pipetting Tapered silicone seal provides airtight fit in all pipet sizes Excellent aspirator for use with Westergren or Wintrobe sedimentation tubes. Comes complete with an elastic cord for dedicating pipettor to a specific reagent bottle.
-
Scienceware® Radioactive Indicator Dots
SP Bel-Art1,000 dots supplied on a tape roll Color-coding complies with OSHA regulations Dots are 1/4” (6.35 mm) in diameter with the radiation symbol on a yellow background. Stick on polypropylene microcentrifuge tubes for quick identification of “hot” tubes.
-
Scienceware® Poxygrid® B.O.D. Bottle Rack
SP Bel-ArtThese racks have 12 places (3 x 4 rows) for 300mL Biological Oxygen Demand Bottles. Stackable for storage or refrigeration allowing 16.7cm (6-9/16") between racks Epoxy coated steel wire is chemical and corrosion resistant and steam autoclavable at 121°C (250°F)
-
Spinvane® Triangular Magnetic Stirring Bars
SP Bel-ArtSpinvane® Magnetic Stirring Bars triangular shape is designed for small conical-shaped tubes and micro vials. Triangle shaped vane is made of solid FDA grade, USP Class VI Teflon® and has a cross-mounted, molded-in Alnico magnet Each size is manufactured for a specific size tube;…
-
Scienceware® Graduated Pitchers - TPX
SP Bel-ArtClear graduations molded on the outside wall for easy to read measuring These pitchers are ideal for general laboratory use. Non-drip spouts and large, well-balanced handles make these clear, unbreakable pitchers the right choice for replacing breakable glassware. Stable performance makes them…
-
Six different, small size, double-ended tools (150mm long) and a pair of tweezers (145mm long) suit small sample handling needs. Each double-ended tool has two different end shapes providing 12 implements to better match user needs. Two small spoons ends for transferring and collecting both…
-
The multifaceted magnetic stirring bar surface adds turbulence relative to similar size smooth cylindrical stirring bars. Ideal for single use applications mixing radioactive reagents or when cross contamination might be a concern Alnico magnet encapsulated in FDA Grade, USP Class VI…