Continuous shearing and blending action mixes with introducing air Corrosion-resistant stainless steel Teflon® TFE bushing 11,500 rpm 120V or 240V models available Includes lab clamp The upward flow stirrer may be used effectively with pharmaceuticals, cosmetics,…

Controls two separate circuits independently Provides precise manual control of heating mantles, tapes, cords and other resistive loads Adjustable output range from 3-100% of rated voltage Use on bench top or mount to lattice work using clamp provided on back panel Will…

User friendly microprocessor-based ramping control Microprocessor based PID control Ramp-rate or time-based programming profiles 24 Step program capability Program looping Guaranteed soak (dwell) deviation Auto tuning function allows automatic setting of control…

Vigorously shakes large funnels Capacity is 80 lbs. The 3D floor shaker eliminates the time consuming and tiring manual shaking of large vessels. The 3D motion circulates liquids up, down, sideways and around making this shaker useful for hemolyzing blood, water pollution analysis or…

The Glas-Col temp-o-trol temperature control is a laboratory equipment used while conducting wide range of experiments. It is suitable for use in research facilities and chemical laboratories. It features reliable and sturdy construction which ensures durability.

Use with heating mantles, tapes, cords, small ovens and other resistive heating loads Digital dual output display for set point and process temperature indication Automatic tuning for accuracy with minimum overshoot Auto cold junction compensation and thermocouple break protection …

The Series TM Resin Reaction Flask mantle provides even heat distribution to prevent scorching of clear resinous material. One-circuit heat input simplifies temperature control.

Horseshoe-base laboratory stand with 11/16 (17mm) diameter stainless steel mast. Accepts containers up to 9" (229mm) diameter. Designed for durability, these lab stands are designed for the lab bench

This tube holder lets you use the Bench-Top Shaker for Mojonnier fat extraction. Each holder accepts up to four flasks, 37 mm in diameter.Maximum of two holders can be shaken at one time. The load max of up to five pounds (2.27 kg) need not be balanced. Unstoppered flasks may be shaken vertically.…

Shakes two flasks simultaneously Operates in cold room or incubator Secures glassware up to 3 1/2” in diameter The WS 180 shaker efficiently agitates small to medium solid phase peptide synthesis flasks. It is also useful for shaking culture flasks and for agitating hard-to-dissolve…

The DigiTrol II uses a 1/16 DIN microprocessor-based, user-selectable control mode temperature control. The control features a digital dual output display set point and process temperature indication. The automatic-tuning feature ensures increased temperature accuracy with minimum overshoot. Easy…

Variable speed control Compact size Heavy duty Fuse protected Smaller size makes this ideal for use on a lab bench; in small incubations, refrigerators, biological cabinets and fume hoods; or in any other area where space is limited. Specifically designed to handle both large…

Provides precise manual control of heating mantles, tapes, cords and other resistive loads Adjustable output range from 3-100% of rated voltage Mount on lattice work or bench top Model 5915A01 will accommodate non-conductive loads to 1200 watts; model 5915A05 to 2400 watts. Electrical…

Made of cast iron aluminum, these lab clamps are ideal for many applications on the bench or latticework. Heavy-duty 90 degree clamp designed to be more user friendly Larger knobs make hand tightening easier and provide sufficient pressure to hold rods securely Can be used on…

Takes one test tube rack containing capped or stoppered tubes from 75 to 200 mm long Use existing test tube racks up to 12" x 5" (305 x 127 mm) Rack is secured in holder by lid which fits over threaded end posts and is adjustable in height above support platform. Knurled nuts are used…

For flasks, resin kettles, etc. Constructed of aluminum exterior for extreme durability Form fitting for even heat distribution Internal operating temperature limit of 450°C. Usable with a splash guard or poncho shield for increased safety and life. Certified by Canadian…

The centrifuge tube holder allows shaking vertically to let gases escape, or horizontally with stoppers secured by a plate. Each holder accommodates up to eight 15 mL glass tubes of up to 16 mm diameter, 126-160 mm long (stoppered) Up to 2 holders can be shaken at once Load Capacity:…

Nutating Separatory Funnel 3D Shaker Our nutating shakers combine the functionalities of a vigorous laboratory shaker with an added circular rocking motion. The result is that samples are shaken while also being oscillated around a central axis - this means that agitation of the…

Flask Holder lets you shake one to four Erlenmeyer flasks at a time. It will work with uncapped flasks (for gentle shaking), or you can close them with screw caps or tapered stoppers. An elastic band automatically holds the stoppers in place. One or two flask holders can be shaken at once. A…

The series STM mantles perform the same function as series TM heating mantles, plus operations requiring more heat. With an upper internal operating temperature of 650 deg C, these mantles resist burnout. STM1400 and STM1500 have 3 in legs for cool lab benches, are sealed, and have inert gas purge fittings.

Selectable settings Orbital offset is 0.070” Maximum capacity is 10 lbs Digital pulse mixer can perform high or low speed vortexing/mixing for a variety of applications. Unit can accommodate a wide range of glassware, racks, well plates or reactor blocks to produce…

Versatile, user-friendly shakers that offer reciprocating shaking and mixing for many hours with bench top convenience. Variable speed motor controller - mixing action from gentle, low speed shaking to vigorous, high speed shaking Compact - can fit inside a fume hood for added safety …

Thorough mixing action Variable speed control Speed range of 2-80 rpm Dry Powder Rotator has the drive bar set at a 20° angle so the motion of the rotator closely reproduces the mixing action achieved when mixing by hand, making it useful for working with hard-to-mix powders. Not only is the…

Smooth rotation and repeatability Totally enclosed motors Variable speed motor drives are designed to make the homogenizing process faster, safer and more thorough. These variable-speed drives feature totally enclosed motors. For high-speed operations, the direct drive shaft is…

Manually adjustable; has a percentage-timer design and no sensing element Regulates mantles, tapes and cords, as well as small furnaces, ovens, hot plates, dies and other applications requiring stepless control Can be used on any non-inductive loads to its rated capacity of 1,440 watts …

No sharp edges Stainless steel construction Easy-to-use Sample is placed in mill cavity, the two mill halves are pressed together and rotated in opposite directions. Mill is durable and corrosion resistant. Clearance between cutting heads is adjustable; factory preset at…

Heating mantles are preferred to Bunsen burners or hot plates for organic liquids. They provide even heating (no hot spots) and maximum surface coverage for better temperature uniformity. The Series TM spherical flask mantle covers only the flask's bottom half, letting you see its full…

Power Drive Unit, Rotator For continuous rotation of accessory head at speeds of 2 to 60 rpm Variable speed control adjusts speed from gentle mixing to rapid agitation Suitable for rotating tissue culture specimens or blood cell suspensions without sedimentation or foaming …

Heavy cast iron base accommodates containers up to 406 mm diameter Nickel-plated rod is 762 mm long x 19 mm diameter With tapped holes in base, 1/2-13 U.S. National Coarse thread, for use of additional rods such as 8835C24 and C36.

Mixes multiple samples for better reproducibility Variable speed range: 100 to 2000 RPM Pulsing feature interrupts vortexing to join upper and lower strata for more thorough mixing DC motor with filter control for smoother operation and longer life Set speed and pulsing to identical time for…

Medium Duty, Model HST10 Totally enclosed, 1/17 hp, permanent magnet DC motor Direct-drive, with rpm/torque readout and X-Y output Maximum rpm: 2,500 Torque: 1.5 lbs.-in. (1.73 kg-cm) Direct drive provides 20 to 2,500 rpm and 1.5 lb.-in. torque. Available for 120 or 240 V, 50/60 Hz…

The ideal, no-hassle way to prevent unwanted heat transfer in the lab Three different InsulEze kits can be used alone or in combination to insulate almost any laboratory configuration Can be used as a heat shield, a cold shield, for insulating over heaters, as a shock absorber, as a…