Meat pH Tester with Built-in Specialized Electrode Accurate and easy to use, the HI981045 pH Tester is ideal for pH measurement during meat processing and is designed to be used with FC097, a high-grade stainless-steel blade. The FC097 blade is sold separately. ±0.05 pH…

Hanna Instruments is proud to introduce the world’s most innovative pH/ORP meter: edge®. edCytiva groundbreaking design is the culmination of Hanna’s vision, design capabilities, integrated production and world class R&D. edge is a single meter that can measure pH and ORP…

Measures pH, conductivity, TDS and temperature Automatic calibration Automatic temperature compensation IP67 Waterproof rating Rugged, waterproof design and 4-in-1 probe makes these meters ideal for field use. Features include two point calibration, selectable conductivity/TDS…

HI 97500 is a portable lux meter designed to perform light measurements simply and accurately. The instrument is supplied with a light sensor connected by a fixed 1.5 m coaxial cable to allow measurements to be taken from a distance without any interference from the operator. Three…

The HI 96801 Sucrose, HI 96802 Fructose, HI 96803 Glucose and HI 96804 Invert Sugar Digital Refractometers are rugged, portable and water resistant for measurements in the lab or field. Each instrument offers a specific analysis to determine accurate sugar concentration. These optical instruments…

The HI 96811 is an optical instrument that employs the measurement of refractive index to display the sugar content in grape samples. The measurement of refractive index is simple and quick. Samples are measured after a simple user calibration with deionized or distilled water. Within seconds the…

Hanna Instruments is proud to introduce the world’s most innovative pH, EC, and DO meter... edge ® . edge ® is thin and lightweight, measuring just 1⁄2” thick and weighing less than 9 ounces. edge ® has an incredibly wide viewing angle, 5.5” LCD and a…

Refillable, combination pH electrode for general laboratory purposes as well as beer testing. Reference: single, Ag/AgCl Junction/Flow Rate: ceramic, single / 15-20 µL/h Electrolyte: KCl 3.5M + AgCl Max Pressure: 0.1 bar Range: pH: 0 to 13 Recommended Operating Temp.:…

Pocket-sized testers for conductivity and TDS User calibrated Large, clear LCD display Automatic temperature compensation The DiST testers are reliable, pocket-sized instruments that give quick and accurate readings of conductivity or TDS. Calibration is easy; simply immerse in calibration…

The HI 96831 Ethylene Glycol Digital Refractometers is rugged, portable, water resistant devices that utilize the measurement of refractive index to determine the percent volume and freezing point of ethylene glycol based solutions. HI 96831 sample is measured after a simple user calibration with…

Thomas No. 1197K47 is ideal for plating baths, wastewater, swimming pool and spa water quality and environmental applications. The HI 1296D pH/temperature probe features an easy to clean recessed tip that prevents solids in solutions from collecting on the sensor. The AISI 316 stainless steel…

A waterproof ORP and temperature meter, the housing has been completely sealed against humidity and designed to float. The temperature values can be displayed in °C or °F units. The meter is factory calibrated and measurements are highly accurate with a stability indicator right on the…

pH Sensor Check™; Allows users to check electrode status at any time Multi-level LCD display; Display the current measurement simultaneously with the current temperature On-screen tutorial messages Automatic Temperature Compensation Automatic one or two point calibration HI…

HI7022L is an ORP test solution designed for testing the performance of ORP electrodes. When the ORP electrode is placed in the test solution the reading obtained should be within +/- 10 mV of the 470 mV @ 25 ° C value. This solution allows users to quickly see if their electrodes are reading…

The FC2020 is a digital pH electrode with a built-in temperature sensor. This application specific electrode is designed for measuring pH in food related products and features a built-in microchip that stores sensor type, serial number and calibration information. Features a single…

The HI 96821 digital sodium chloride refractometer meets the requirements of the food industry. This optical instrument that employs the measurement of the refractive index to determine sodium chloride concentration in aqueous solutions used in food preparation. It is not intended for sea water…

Replacement ink cartridge for bench meters with built-in printer (HI 122).

Direct pH measurement on paper and leather is fast and accurate with the HI 99171 pH meter. HI 99171 utilizes a flat tip probe designed to optimize surface contact with the sample. pH measurement of papers and cartons is important, not only in the production phase, but also in the packaging…

pH/ORP/ISE, EC/TDS/Resistivity/Salinity/Seawater Specific Gravity, Turbidity, DO, Temperature and Atmospheric Pressure Rugged, waterproof and easy to use, the HI 9829 is the ideal meters for field measurements of lakes, rivers and seas. Both meters display 1 to 12 parameters simultaneously…

PICCOLO® is a revolutionary pH meter with a 4-in-1 amplified electrode. Conventional pH meters are susceptible to the weak, high impedance signal which makes the electrode, connector, cable and meter vulnerable to noise, humidity and dirty environments. PICCOLO® has overcome these problems with…

Rugged 3-in-1 probe provides long life Probe is engineered to resist contamination. Particularly suited to harsh conditions, the probe incorporates a pH electrode with a cloth junction and gel polymer electrolyte for long life and greater stability of readings. The probe has a 6-month…

HI6421 includes Hanna's HI7641133 optical dissolved oxygen probe (opdo®) that is based on the principle of fluorescence quenching. An immobilized Pt-based luminophore is excited by the light of a blue LED and emits a red light. As oxygen interacts with the luminophore it reduces the…

Range: 0.000 to 1.999 µS/cm Accuracy: 2% full scale Compact size fits in a lab coat pocket Fast read-out on a large LCD Ideal for deionized or distilled water. Easily checks 1 to 50 MegOHM water on the spot. Inexpensive method to guarantee the quality of your water.…

Fast and accurate readings for the cost of a few rolls of litmus paper 3,000 hours of continuous use Large, easy-to-read LCD Range: 0-14 pH; resolution: 0.1 pH; accuracy: ±0.2 pH Manual, two-point calibration Checker 1 testers have a replaceable screw-type combination pH electrode.

HI6221 is a streamlined benchtop meter with a large touch screen display, comprised of a housing and an integrated pH / ORP measurement module. Compact and easy to operate, the benchtop meter is delivered with Hanna Instruments' HI1131B double junction combination pH electrode, together with…

HANNA offers a wide range of combination pH and ORP electrodes specifically designed for needs of industrial users. In order to reduce contamination problems, all electrodes are gel or polymer filled and feature double-junction technology. The BNC connector allows quick and easy connection to…

Easier to use and more accurate than chemical test kits Total Chlorine Range: 0.00 to 3.50 ppm(mg/L) EPA approved DPD method Accuracy ±0.03 ppm (mg/L) ±3% of reading 0.01 ppm (mg/L) resolution (250 points) Large, easy-to-read digits Auto shut-off Dedicated to a single parameter Designed to…

Thomas No. 1197F28: pH Sensor, with o-ring, to be used with HI 9829 and HI 98290 series multiparameter meters Thomas No. 1197F29: pH/ORP sensor, with o-ring, to be used with HI 9829 and HI 98290 series multiparameter meters Thomas No. 1197F30: Ammonium ISE sensor, with o-ring, to be…

Reagents for ammonia MR, Nessler Method Range: 0.00 to 9.99 mg/L (10.00 mg/L) Some meters allow the user to extend the range to the value between brackets.