The funnel holder will accommodate up to three funnels at once, depending on size, and can hold funnels as large as 500 ml. You can mount one or two of these holders on the shaker base. Just load the funnels with the stopcock down, adjust to the desired shaking position, and turn on the shaker. The…

Horseshoe-base laboratory stand with 11/16 (17mm) diameter stainless steel mast. Accepts containers up to 9" (229mm) diameter. Designed for durability, these lab stands are designed for the lab bench

The series O Buchner funnel mantle provides gentle heat for solutions that must be filtered while warm.

With a patented Glas-Col Snorkel Stopper, you'll never again have to take time to open the stopcock and relieve pressure when vigorously shaking a separatory funnel, because our Snorkel Stopper does the task automatically. If you use a Glas-Col shaker, you can simply load the funnels onto it…

This series O mantle is a hemispherical style, meaning it covers only the bottom half of the flask. This allows full view of the flask contents. The mantle accommodates single- and multi-neck flasks.

These tilting supports allow fingertip-control for emptying flasks. The heating mantle support ring is adjustable and locks at any convenient height. The base is compact and extremely stable. The upper cross member strengthens the assembly and serves as a stop for the tilted mantle.

This timed control turns the output load on and off and then repeats the cycle. Each position on the knob from LO to HI represents a specific cycle time where the on time ranges from 6 to 100 percent. For example the LO setting represents a total cycle of approximately 60 seconds with an on time of…

The Buchner funnel mantle provides convenient support for funnel and gentle heat for solutions that must be kept warm during transfer. Durable support bracket slides over mast of ring stand, enabling mantle to be positioned at any convenient height above receiver.

Glass-Col offers its standard series TM mantle for round-bottom flasks with the PowrTrol power control as a special, economical package. The PowrTrol is a solid-state, proportional-voltage control that provides precise manual control of the output range, which is adjustable from 5-100%. The…

The series O Erlenmeyer and filter flask mantles help prevent thermal strain on unusually susceptible heavy-walled vessels.

Power Drive Unit, Rotator For continuous rotation of accessory head at speeds of 2 to 60 rpm Variable speed control adjusts speed from gentle mixing to rapid agitation Suitable for rotating tissue culture specimens or blood cell suspensions without sedimentation or foaming …

These funnel mantles allow extraction of fluids while hot, preventing solidification of viscous material in cold stopcocks. The thickness of the fiberglass fabric between heating elements and soft glass wall of the separatory funnel prevents thermal strain and the resultant cracking. Viewing is…

The series O Erlenmeyer and filter flask mantles help prevent thermal strain on unusually susceptible heavy-walled vessels.

With a patented Glas-Col Snorkel Stopper, you'll never again have to take time to open the stopcock and relieve pressure when vigorously shaking a separatory funnel, because our Snorkel Stopper does the task automatically. If you use a Glas-Col shaker, you can simply load the funnels onto it…

Splash guards can help prevent mantle damage from chemical spillage and improve operating safety when heating liquids. The shield is appropriate for use with low-wattage mantles (series M and TM) for flasks, glass beakers, steel beakers, resin flasks, and Buchner funnels. A rugged silicone pad…

The Glas-Col flask holder is a laboratory equipment used while conducting wide range of experiments. It is suitable for use in research facilities and chemical laboratories. It features reliable and sturdy construction which ensures durability.

The series STM mantles perform the same function as series TM heating mantles, plus operations requiring more heat. With an upper internal operating temperature of 650 deg C, these mantles resist burnout. STM1400 and STM1500 have 3 in legs for cool lab benches, are sealed, and have inert gas purge fittings.

Splash guards can help prevent mantle damage from chemical spillage and improve operating safety when heating liquids. The shield is appropriate for use with low-wattage mantles (series M and TM) for flasks, glass beakers, steel beakers, resin flasks, and Buchner funnels. A rugged silicone pad…

Versatile, user-friendly shakers that offer reciprocating shaking and mixing for many hours with bench top convenience. Variable speed motor controller - mixing action from gentle, low speed shaking to vigorous, high speed shaking Compact - can fit inside a fume hood for added safety …

Splash guards can help prevent mantle damage from chemical spillage and improve operating safety when heating liquids. The shield is appropriate for use with low-wattage mantles (series M and TM) for flasks, glass beakers, steel beakers, resin flasks, and Buchner funnels. A rugged silicone pad…

This series O spherical mantle covers both the top and bottom of 1-, 2-, or 3-neck spherical flasks for improved safety and efficiency. The circumferential zipper holds the halves snugly together to prevent heat loss, and the side split in top allows removal without disturbing the flask. series O…

Each separatory funnel holder will hold one funnel, and you can use up to four holders, which mount to the platform without fasteners. While the rear support of the funnel holder remains stationary, the front part holding the funnel can be released and rotated 360°. This permits the funnel…

Heavy cast iron base accommodates containers up to 406 mm diameter Nickel-plated rod is 762 mm long x 19 mm diameter With tapped holes in base, 1/2-13 U.S. National Coarse thread, for use of additional rods such as 8835C24 and C36.

In both permanent and temporary applications, this tape heats odd lengths of glass tubes and metal pipes. Ribbon-type heating elements running lengthwise in the tape are encased in durable glass braid and are impregnated and covered with tough silicone rubber, which insulates stranded terminal…

The Glas-Col quick change chuck is a laboratory equipment used while conducting wide range of experiments. It is suitable for use in research facilities and chemical laboratories. It features reliable and sturdy construction which ensures durability.

Glass-Col offers its standard series TM mantle for round-bottom flasks with the PowrTrol power control as a special, economical package. The PowrTrol is a solid-state, proportional-voltage control that provides precise manual control of the output range, which is adjustable from 5-100%. The…

This table-top support holds spherical and hemispherical series O mantles up to 5 L capacity. The steel support, with its fabric strap basket, is strong, handy and durable. Attaches easily to stable ring stands or distillation racks.

These funnel mantles allow extraction of fluids while hot, preventing solidification of viscous material in cold stopcocks. The thickness of the fiberglass fabric between heating elements and soft glass wall of the separatory funnel prevents thermal strain and the resultant cracking. Viewing is…

Shaker holder for 500 mL Erlenmeyer flask. The Erlenmeyer flask holder will hold a single flask Mid-Range shaker holds up to four

Shakes two flasks simultaneously Operates in cold room or incubator Secures glassware up to 3 1/2” in diameter The WS 180 shaker efficiently agitates small to medium solid phase peptide synthesis flasks. It is also useful for shaking culture flasks and for agitating hard-to-dissolve…

The series O Erlenmeyer and filter flask mantles help prevent thermal strain on unusually susceptible heavy-walled vessels.

Selectable settings Orbital offset is 0.070” Maximum capacity is 10 lbs Digital pulse mixer can perform high or low speed vortexing/mixing for a variety of applications. Unit can accommodate a wide range of glassware, racks, well plates or reactor blocks to produce…