The series O Buchner funnel mantle provides gentle heat for solutions that must be filtered while warm.

Glass-Col offers its standard series TM mantle for round-bottom flasks with the PowrTrol power control as a special, economical package. The PowrTrol is a solid-state, proportional-voltage control that provides precise manual control of the output range, which is adjustable from 5-100%. The…

Splash guards can help prevent mantle damage from chemical spillage and improve operating safety when heating liquids. The shield is appropriate for use with low-wattage mantles (series M and TM) for flasks, glass beakers, steel beakers, resin flasks, and Buchner funnels. A rugged silicone pad…

The series O Buchner funnel mantle provides gentle heat for solutions that must be filtered while warm.

The series O Erlenmeyer and filter flask mantles help prevent thermal strain on unusually susceptible heavy-walled vessels.

Glass-Col offers its standard series TM mantle for round-bottom flasks with the PowrTrol power control as a special, economical package. The PowrTrol is a solid-state, proportional-voltage control that provides precise manual control of the output range, which is adjustable from 5-100%. The…

The series O Erlenmeyer and filter flask mantles help prevent thermal strain on unusually susceptible heavy-walled vessels.

This funnel mantle reduces viscosity and prevents precipitation of solutions that must be kept warm during transfer.

The series TM spherical flask mantle covers only the flask's bottom half, letting you see its full contents. Larger sizes have multiple circuits for ease of temperature control when a flask is less than half full. Splash guards can be used with TM102 through TM117. Poncho Safety Shields can be used…

The Glas-Col quick change chuck is a laboratory equipment used while conducting wide range of experiments. It is suitable for use in research facilities and chemical laboratories. It features reliable and sturdy construction which ensures durability.

VentSep, a special 1000 mL separatory funnel with a built-in relief valve, can be used on Glas-Col's Bench-top Shaker or either of the Glas-Col 3D shakers. These separatory funnels feature a built-in relief valve Funnels have a fluoropolymer resin stopcock, and a screw cap with…

Power Drive Unit, Rotator For continuous rotation of accessory head at speeds of 2 to 60 rpm Variable speed control adjusts speed from gentle mixing to rapid agitation Suitable for rotating tissue culture specimens or blood cell suspensions without sedimentation or foaming …

This series O spherical mantle covers both the top and bottom of 1-, 2-, or 3-neck spherical flasks for improved safety and efficiency. The circumferential zipper holds the halves snugly together to prevent heat loss, and the side split in top allows removal without disturbing the flask. series O…

The Flexible homogenizer drive allows up-and-down motion of rotating pestle in a stationary tube that can be mounted in ice or controlled-temperature bath. Application: Accepts the Adjustable Chucks Furnished with the Motor Drives as Well as the L11 Quick-Change Chuck and the L14 and L15 Flex-Grip Chucks

Nutating Separatory Funnel 3D Shaker Our nutating shakers combine the functionalities of a vigorous laboratory shaker with an added circular rocking motion. The result is that samples are shaken while also being oscillated around a central axis - this means that agitation of the…

This series O spherical mantle covers both the top and bottom of 1-, 2-, or 3-neck spherical flasks for improved safety and efficiency. The circumferential zipper holds the halves snugly together to prevent heat loss, and the side split in top allows removal without disturbing the flask.

With a patented Glas-Col Snorkel Stopper, you'll never again have to take time to open the stopcock and relieve pressure when vigorously shaking a separatory funnel, because our Snorkel Stopper does the task automatically. If you use a Glas-Col shaker, you can simply load the funnels onto it…

Holders for Large Separatory Funnels or Flasks From the upright or fill position, the funnel may be rotated to the 45° or 60° position for shaking and then returned to the upright position for the addition of materials or extracting. The flask may remain in the holder for the entire…

Takes from one to three separatory funnels size 60 to 250 mL Funnel stoppers are held in place by elastic bands. Three adjustable, rubber-covered yokes are used to secure funnels in holder. Spring- loaded release mechanism permits holder to be rotated about shank in 30° increments…

Horseshoe-base laboratory stand with 11/16 (17mm) diameter stainless steel mast. Accepts containers up to 9" (229mm) diameter. Designed for durability, these lab stands are designed for the lab bench

This series O spherical mantle covers both the top and bottom of 1-, 2-, or 3-neck spherical flasks for improved safety and efficiency. The circumferential zipper holds the halves snugly together to prevent heat loss, and the side split in top allows removal without disturbing the flask.

This funnel mantle reduces viscosity and prevents precipitation of solutions that must be kept warm during transfer.

The series O Erlenmeyer and filter flask mantles help prevent thermal strain on unusually susceptible heavy-walled vessels.

The Glas-Col type J 36 Inch thermocouple with miniature plug, is a laboratory equipment used for measuring temperature. It is suitable for use in research facilities and chemical laboratories. It features reliable and sturdy construction which ensures durability. This thermocouple is ideal for use…

These tilting supports allow fingertip-control for emptying flasks. The heating mantle support ring is adjustable and locks at any convenient height. The base is compact and extremely stable. The upper cross member strengthens the assembly and serves as a stop for the tilted mantle.

These supports are adjustable in height to provide convenient locations of series M mantles. If a drain container is necessary, one side of the leg brace may be easily removed to accommodate it. The adjustable legs are self-storing when not in use.

These tilting supports allow fingertip-control for emptying flasks. The heating mantle support ring is adjustable and locks at any convenient height. The base is compact and extremely stable. The upper cross member strengthens the assembly and serves as a stop for the tilted mantle.

The Glas-Col flask holder is a laboratory equipment used while conducting wide range of experiments. It is suitable for use in research facilities and chemical laboratories. It features reliable and sturdy construction which ensures durability.

The series TM spherical flask mantle covers only the flask's bottom half, letting you see its full contents. Larger sizes have multiple circuits for ease of temperature control when a flask is less than half full. Splash Guards can be used with TM102 through TM117. Poncho Safety Shields can be used…

Shaker holder for 500 mL Erlenmeyer flask. The Erlenmeyer flask holder will hold a single flask Mid-Range shaker holds up to four

These supports are adjustable in height to provide convenient locations of series M mantles. If a drain container is necessary, one side of the leg brace may be easily removed to accommodate it. The adjustable legs are self-storing when not in use.

These tilting supports allow fingertip-control for emptying flasks. The heating mantle support ring is adjustable and locks at any convenient height. The base is compact and extremely stable. The upper cross member strengthens the assembly and serves as a stop for the tilted mantle.