These racks are manufactured of clear acrylic shelves with white bases and sides. For typing, screening and other blood bank applications. For blood donor processing. Holds donor sample tubes as well as tubes for donor’s serum and cell suspension, ABO, Rh, antibody grouping and screening.

Lightweight, sturdy bottle carrier provides economical means to transport up to six (3 1/2" diam.) bottles.

These polymethylpentene cylinders feature permanently molded graduations that will not fade after repeated autoclaving. Meets stringent international quality criteria according to ISO 6706 standards. Tolerances according to DIN 12 680 TT, Class B. Maximum temperature: PP 121°C, PMP 135°C.

Polypropylene Molded graduations - in liters Low form for added stability Autoclavable; use up to 135°C Autoclavable, highly translucent especially when filled with liquids. Permanent molded in graduations. Resistant. No drip spout. Thumb grip on handle.

Leakproof bottles are ideal for a wide range of liquids and solids High performance polypropylene bottle with polypropylene screw cap Autoclavable Wide mouth for easy filling Wide mouth bottles, constructed of high-clarity polypropylene, are available in a full range of sizes…

Translucent polypropylene. Resistant to breakage. Blue graduations, ring mark and inscriptions. Ideal for fluoro and silicate chemistry. Recommended cleaning with mild alkaline detergent up to 60°C. Note: Exposure to temperatures above 60°C may cause volume changes.

Our stir bars feature ALNICO V magnetic cores which are one of the most powerful permanent magnet alloys available. Stir bars should not be stored in a random mass, or dropped on a hard surface especially steel. Stir bars should be stored in pairs to maintain magnetic strength.

Lightweight polypropylene funnels with ribs that prevent air locks, allowing rapid filtration Autoclavable to 121°C Made from food grade plastic

Pails with Covers (1212W33) , (1212W34) , (1212W35) and (1212W36) . Heavy-duty pails molded of high density Polyethylene. Rigid construction. Steel bail handles with plastic hand grip. Snap-on cover is included.   Available in 2, 2.75 and 16 quart capacities. Pail,…

Tamper evident bottles. High-density Polyethylene. The tamper-evident cap incorporates a safety ring which is secured when the cap is screwed on to the bottle. Opening the bottle breaks the safety ring, showing signs of interference.

Disposable, polypropylene bags, 1.5 mil thick Translucent bags also usable for storing Sold in packs of 100. Available in ten sizes. Sizes given in listings below.

Product Dimensions (l x w x h) : 0x1x2.25in Vials. Hinged Snap Cap. General purpose 25ml low-density polyethylene container with push-in friction fit hinged lids. Dimensions:  55mm H x 30mm Ø. Withstands temperatures up to 80°C.

High-Density Polyethylene. Economically priced funnels with ribs which prevent air lock and speed filtration. The two smallest sizes are high-density polyethylene, the remainder are polypropylene. Funnel Set (1210B90) includes one each: 50mL (1210B85), 75mL (1210B86), 100mL (1210B87), and…

Ideal spill trays for autoclaving waste disposal containers such as the Dynalon Bio-bins Autoclave tray for other plastic or glass laboratory items Help contain accidental chemical spills in the laboratory Material: Polypropylene (PP) 3/16" double-welded construction Tested in…

Product Dimensions (l x w x h) : 14.75x4.75x12.5in Merit Water Still (3915N02) Replacement Boiler  

Product Dimensions (l x w x h) : 9.875x11x13.25in Rack Holder. This clear acrylic rack holder is suitable for use on a bench top or in a freezer to maximize use of space. This rack holder has four shelves to hold eight trays including fraction collector trays. It can fit many different racks.…

Stir Bar Kit - 16 Bars Product Dimensions (l x w x h) : 7.38x3.94x1.28in Polytetrafluoroethylene Stirring Bar Kit. Kit contains: (2) each 5/16 x 1/2 (8 x 13mm), (2) each 3/8 x 2 (9.5 x 51mm), (2) each 5/16 x 5/8 (8 x 16mm), (2) each 3/8" x 2 1/2 (9.5 x 64mm),(2) each 3/8 x 1 (9.5 x…

Vinyl laboratory tubing with a wall thickness that is non-toxic, transparent and inert. This smooth and flexible tubing is chemical resistant with a specific gravity of 1.2 and a tensile strength of 2000 psi.  Our Vinyl Food Grade Tubing is designed for use in the laboratory with an elongation…

Manufactured from chemically-resistant polypropylene, this sampling device is perfect for corrosive environments and for hard to reach places A 500 mL bottle screws into the end of the 6 foot handle and is filled via four ports (two allowing liquid to enter and two allowing air to escape) …

Dispensing Trays. Heavy trays fabricated with 1/4" thick high density polyethylene. All welded construction. Dispensing trays are supplied with polypropylene dispensing valve located as close to the tray bottom as possible, but can be in other locations upon request. All trays below can be…

Manufactured from chemically-resistant polypropylene Specifically designed for easy effective sampling of 55 gallon drums or vessels with openings as small as 2 inch id The 100 mL bottle easily passes through the opening for quick filling The 4-inch T-design handle prevents dropping of sampler…

Leak proof, rigid and amber these high density polyethylene wide mouth 150 mL lab bottles have excellent chemical resistance and are suitable for sampling and storage of light sensitive materials. Excellent chemical resistance. Supplied with black polypropylene screw closures.

Use Polycarbonate Graduated Bottles with polypropylene closures with biologicals, liquids, reagents, media, buffers and aqueous solutions. Manufactured in Class 10K cleanroom. Narrow mouth Autoclavable and leakproof Glass clear, durable and highly break resistant Graduated in metric…

Useful for the transport and benchtop storage of vials, bottles, containers, instruments and various laboratory accessories. Made of food grade high impact polystyrene. Very durable.

Swab Cotton 3" Wood Regular Head (1212W18 ) Product Dimensions (l x w x h) : 3x0.195x0in Cotton Swabs: regular head, 2.75" length. Swab Cotton 3" Wood Pointed (1212W19 ) Product Dimensions (l x w x h) : 3x0.117x0in Cotton Swabs: pointed…

Containers are HDPE except 8, 16, 32 oz natural and white, and 83 oz natural, which are PPCO, a copolymer of Polypropylene and High Density Polyethylene. PPCO offers a product with a higher temperature range while maintaining good impact strength. Recycling code is "5" for PP and the HDPE…

Fixed volume 5uL to 1000 uL MiniFIX Micropipettes Cost effective Ideal in schools for routine applications where speed and precision is required Color-coded button for easy volume identification Accommodates all common tips Good for approximately 5,000 pipettings This new…

These hinged lid containers are ideal for use just about anywhere. They feature a secure snap closure with hinged lid that eliminates lost caps. Containers offer air and moisture resistance to contents. Manufactured from flexible FDA approvable polyethylene resin.

Stirring rods are available in two versions: Pure PTFE solid stirring rod with tapered end, and pure PTFE stirring rod with mild steel core. The stirring rod version with steel core can be bent into a permanent shape. Inert and will not scratch, use up to 280°C.

This carboy range features large carrying handles and indented hand grips on bottom for easy carrying and pouring. These carboys are supplied with 63mm high-density Polyethylene closures that are threaded and can be drilled to accept faucets. Carboys are made with food grade resins, are leakproof…

Premium quality, 1.5 mL tubes Leak tested to 20,000 RCF Attached lid Uniform lid membrane thickness Frosted writing area Attached lids provide a tight leakproof seal, can be easily opened and allow trouble-free piercing. Tubes are leak tested to 20,000 RCF for 20 minutes…