Water Sampler

Compare Tool

Select up to 3 products

Water Sampler
1 - 32 of 46
Sort
View
Show

polyscience

  • Swing Sampler

    Nasco

    …or small solids 6' pole extends to 12’, 8' pole extends to 24' Includes 960 mL , wide mouth, high-density polyethylene bottle End of sampler swings, allowing collection of sample from a horizontal flowing stream, such as a sewer. Snapper attachments (sold below) are durable plastic and…

  • Water Sample Dipper

    Bel-Art Products

    …the ability to sample from an elevated position. Minimum handle length is 91cm (3 ft.) with adjustable length at fixed 15cm (6") intervals. Three-part handle can be disassembled for cleaning. Telescoping aluminum handle extends to 2.7 m (9'). Safely reach water samples in tanks, lakes, ponds.

  • Liquid Sampler

    Dynalon

    Manufactured from chemically-resistant polypropylene, this sampling device is perfect for corrosive environments and for hard to reach places A 500 mL bottle screws into the end of the 6 foot handle and is filled via four ports (two allowing liquid to enter and two allowing air to escape) …

  • Water Sampler

    LaMotte

    Consists of removable glass sampling chamber and clear acrylic plastic outer chamber Chamber has clip to hold thermometer, not supplied Sample chamber is 21 mm i.d. x 180 mm high; capacity 65 mL Includes 2-lb lead weight and three sample chambers Requires suitable calibrated line

  • Sub Surface Grab Sampler® II

    Wheaton

    …fluid flow in deep manholes and hard to reach sub-surface sampling areas Helps meet EPA requirements for water and waste water sampling Available in lengths up to 18’ (5.5m) Each sampler consists of an inert polypropylene head with stainless steel fittings and an aluminum pole assembly with…

  • Trumpet Coliwasas

    Wheaton

    Sample sludge, waste or viscous fluids Single use 200 mL capacity Disposable glass coliwasa is best suited for use when sampling sludge or semi-solid material. The rigidity of the glass makes it suitable for boring through semi-solid sludge-type materials. The coliwasas tight…

  • Grab Sampler III

    Wheaton

    Wide mouth design Six foot modular sections Use when sampling hazardous and corrosive materials, as well as waste water. Chemically resistant stainless steel and polypropylene construction. Wide mouth accepts light sludges and slurries. Modular design uses 6-foot add-on sections. Fits…

  • Tekmar 3100 And Agilent 7695a Purge And Trap Supplies

    Agilent Technologies

    …efficient design in terms of purging and it is the standard choice for clean drinking water. Available in 1/2 and 3/4 in. mount sizes. The 7695A Purge and Trap concentrator has a 1/2 in. mount, and the automatic sampler has a 3/4 in. mount. An adapter is available to mount 3/4 in. glassware on the…

  • Drum Samplers

    Dynalon

    …sampling of 55 gallon drums or vessels with openings as small as 2 inch id The 100 mL bottle easily passes through the opening for quick filling The 4-inch T-design handle prevents dropping of sampler into the opening of the drum Handle available in 3- or 8-foot length x 1-1/4” diameter

  • Sampling & Measurement Outfit

    LaMotte

    A necessity for any salt water field sampling effort. Durable, reliable sampling gear and measurement devices all housed within a rugged field carrying case for easy transport and storage. Outfit Includes: Stainless Steel Bottom Sampling Dredge (1097) Plankton Net (1063) Sounding Lead…

  • Water Sampling Outfit, LaMotte 3103

    LaMotte

    Water Sampling Outfit, LaMotte 3103 For collecting water samples to be tested for dissolved oxygen content Clear acrylic sampling chamber takes 60 mL sample collecting bottle Includes sampling chamber, 9866A35 Calibrated Line and nine USP Type 1 glass sample bottles with…

  • Plankton Net

    LaMotte

    For collecting plankton particles in a 50 mL conical bottom centrifuge tube secured by adjustable band clamp to the bottom of a conical, 10-mesh nylon cloth net Net is 380 mm in length Top of net is fitted with 127 mm diameter brass ring and harness for attachment to suitable sampling line …

  • Storm Water Samplers

    Thermo Scientific Nalgene

    …FRL-6880-5 10/20/00) and most state general permit grab sampling requirements.  Sampler bottles are for use with Storm Water Mounting Kit. Storm Water Sampler Mounting Kit tube can be positioned in storm water ditch, stream or grate outfalls. Collects only runoff [MDASH] not the rain -…

  • Bailers

    Voss

    …clean-up and cross-contamination Rugged, high-density polyethylene Each unit individually decontaminated with Liquinox™ washing and DI water rinse Ready-to-use Capacity approximately 1 L Friction-fit nozzle for easy, no-splash sample removal For use in all ground wells with two inches…

  • Economy Bailers

    Saint Gobain

    Clear body made of Teflon with precision ground ball check Easily disassembled for cleaning No threads for contaminants to lodge Ultra-secure handle will not detach accidentally Available in 1 or 3 foot lengths 1 3/4” o.d. for 2” or larger wells Capacity…

  • D.O. Sampling Bottle, 60 mL

    LaMotte

    For collecting water samples to be tested for dissolved oxygen content Capacity of 60 mL USP Type 1 glass With PolySeal ® screw cap which has conical polyethylene liner which seals against mouth of bottle Capacity of 1 L

  • Bailer Retrieval Reel

    Voss

    Eliminates cross-contamination Speeds up sampling Features a 7" reel with a free-spin preventer that can be set for lowering or retrieving the bailer. Pre-wound, disposable twine, provided on 4" cores, eliminates cross-contamination. The reel uses wing-nut assembly for easy loading and…

  • Sub Surface Grab Sampler I

    Wheaton

    …docks and other sub surfaces No need to physically enter the sample area Eliminates surface contamination Helps meet EPA requirements for water and wastewater sampling Lightweight construction Constructed of 72” x 3/4” (183 x 2cm) square aluminum tubing with a golden anodine finish …

  • Norwell Teflon Bailers

    Saint Gobain

    Standard Norwell 1 3/4” Bailer Capacity can be increased by addition of extension sections and couplings Transparent to permit view of sample. Available in 1, 2 and 3 foot lengths. Capacity indicated in listings. 1 7/8” o.d. fits 2” wells Complete family of…

  • Glass Coliwasas

    Wheaton

    Sample liquids from drums Liquid-tight Teflon® seal reduces spills Teflon seal design allows sampling to within 1/2” of drum bottom. Once sample has been collected, lower and press lightly on inner tube, which positively seats Teflon seal, locking sample column into place. Dimensions:…

  • Norwell® Mucksucker Samplers

    Saint Gobain

    Norwell® Mucksucker Samplers allow safe, accurate sample collection from 55-gallon drums, truck and rail tank cars, large tanks, process vessels and bodies of water to support sampling applications within laboratory, pharmaceutical, environmental, chemical, food and beverage, semiconductor and…

  • Whirl-Pak® Water Sample Bags

    Nasco

    …for water sampling With white marking strip and 4 oz. fill line Similar to 1303R20 bags except contain a nontoxic, non-nutritive tablet impregnated with 10 mg of sodium thiosulfate. For dechlorinating water samples in accordance with APHA Standard Methods for the Examination of Water and…

  • PVC Coliwasa

    Wheaton

    …sampling unit up to 20 feet. Spin open top locking handle, insert slowly into drum to collect liquid column, pull top handle to seat bottom valve plate and spin top handle closed, trapping column in sampler. Dimensions: 1 3/8” i.d. x 1 5/8” o.d. Volume (in milliliters) given in listings.

  • Sounding Lead & Calibrated Line Unit

    LaMotte

    Heavy nylon line calibrated from 0 to 20 meters in 1 meter increments Lower end of line is fitted with brass hook for attachment to sampling devices, Secchi disk, etc. With removable 2-lb (0.91-kg) lead weight Top end of line is attached to a foam plastic float which also serves as…

  • Bomb Sampler, SS, Type 302, 500 mL

    Wheaton

    For collecting liquid samples from storage tanks, ponds, wells, etc. Permits collection at various depths Constructed of corrosion-resistant stainless steel, Type 302 Plunger can be activated by bumping unit on tank bottom or at any depth means of a second cord. A weighted plunger…

  • Drum Thief

    Wheaton

    Open-Ended Drum Thief Soda lime glass units easily broken for quick disposal. All are 43 inches long; capacities from a full 55 gallon drum. Approximate capacity and diameter given in listings.

  • The Sludge Judge® Ultra

    Nasco

    …to help reduce deterioration from the sun’s harmful rays. The material is very rigid, minimizing bending of the unit when it is full of water or other liquids. Durable in cold temperatures; can withstand heat up to 280° F (138° C) with careful handling. The 3/4" (1.9 cm)…

  • Imhoff Cone

    LaMotte

    For determining settleable matter in sewage Clear, impact-resistant plastic Capacity of 1 L Calibrated from 0 to 1000 mL With removable plug at tip; includes wood stand and plastic stirring rod

  • HYCHECK™ Contact Paddles

    BD

    …their production area to assess the nature and extent of the bioburden present. It is also useful for monitoring industrial fluids (cooling tower water, machine tool coolants and paper slurry) for bacteria to prevent a variety of ill effects including equipment damage, contact dermatitis, unpleasant…

  • Fluid Sampling Kit

    MilliporeSigma

    For sampling turbine fuels, water or other liquids through Millipore Contamination Analysis Monitors prior to gravimetric or colorimetric analysis. The stainless sampler assembly plugs into a quick-release valve installed in the system line, which allows a measured quantity of liquid to pass…

  • Scienceware® No-Wire™ Test Tube Racks

    Bel-Art Products

    … Rugged racks are molded of autoclavable polypropylene. Footprint dimensions fit many different auto samplers. The rack can sink in a water bath and remain stable even in agitated water. Each rack features end plates for labeling as well as numbered and lettered rows for tube identification.…

  • Rack 16mm 60 Place Blue

    Scienceware®

    Rugged racks are molded of autoclavable polypropylene. Footprint dimensions fit many different auto samplers. The rack can sink in a water bath and remain stable even in agitated water. Each rack features end plates for labeling as well as numbered and lettered rows for tube identification. Assembly…

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.