Autoclave Bags

…the use of autoclaves. Such sterile waste is then allowed in a landfill. The bags must clearly show that the bag of hazardous material has been autoclaved. Tufpak accomplishes this at no added cost by imprinting a message of compliance, which is not readable until proper autoclaving has been…

…membrane filters, culture plates, pipettes, etc., then autoclaved and discarded. The three largest sizes hold 65, 200 and 240 standard petri dishes respectively. Steam autoclavable at 135º C (275º F). 100 per box. Bags made of polypropylene, 05 mm (.002") thick. Transparent, autoclave bags

The safe way to autoclave your contaminated products Wide range of volumes Each bag is 40 µm thick

Autoclaving bags for MBS I funnels Autoclaving bags for MBS I funnels

…biohazard disposal 0.05 mm, 2 mil polypropylene Autoclavable at 121°C Transparent For maximum protection and convenience when disposing of biohazardous waste. Three sizes hold 65, 200 or 240 standard petri dishes. Ideal for autoclaving discarded membrane filters, culture plates and pipettes.

This adhesive tape is used to seal autoclave bags and pouches and changes color when the contents have passed through a sterilization cycle. Each roll is 165 feet (50m) long. 1181C23 is used when using autoclave sterilization (20 ft. at +121°C, 10 ft. at +125°C and 5 ft. at…

…autoclave bags are ideal for processing hazardous materials. Polypropylene bags can withstand higher temperatures of 275F (135C). Imprinted with the standard biohazard symbol. Welded seams increase durability and protection. Bags feature an indicator that changes to read "AUTOCLAVED"…

…temperature autoclavable bags are manufactured from heavy gauge polypropylene material that is not only more puncture-resistant than polyethylene, but also withstands autoclaving at temperatures up to 136°C (250°F). Their ability to contain is completely unaffected at standard autoclave…

Disposable, polypropylene bags, 1.5 mil thick Translucent bags also usable for storing Sold in packs of 100. Available in ten sizes. Sizes given in listings below.

…red polypropylene bags include black biohazard symbol and precautionary procedures printed in four languages (English, Spanish, French, German) for added safety. Sterilization patch darkens when subjected to steam sterilization Hgh temperature steam autoclavable to 135°C (275°F)…

…Cradle To Grave requirements 40 CFR 262. All Biohazard bags have a Temperature Indicator Patch that actually spells out “CONTENTS HAVE BEEN AUTOCLAVED” after exposure to wet steam heat and autoclave pressure to visually show bag has been processed. Compliant with California Health…

…reagents and can be autoclaved at 121°C. Each tube is molded with precise graduation marks for accurate measurements. The ultra-clear polypropylene won't hinder spectrophotometer reading. These microcentrifuge tubes are offered in resealable, tamper evident self-standing bags. Features:…

These 500uL (0.5mL) Beckman® Type microcentrifuge tubes with attached cap are non-graduated. The tubes are made from polyethylene and are not autoclavable. The tubes are sold in bags of 1000.

Clear bags imprinted with blue biohazard labeling designed for safe disposal. Constructed of 2.0-mil thick polypropylene, allowing for repeated autoclaving. Strong side seams for securely holding items. Front write-on panel. Autoclavable at 250°F (121°C). 4 inner packs of 50 bags, sold as a…

Reusable, transparent polyethylene bags Ideal for shipping or storage Useful as sample bags Not autoclavable Latex free FDA approved material 0209P22-P23: Lightweight bags, 0.038mm (1.5 mil) thick. All other bags are heavyweight bags, 0.1016mm (4 mil) thick.

Ideal for the hygienic disposal of contaminated laboratory items Made of polypropylene foil for sterilisation in the steam autoclave

…autoclave bags are ideal for processing hazardous materials. Polypropylene bags can withstand higher temperatures of 275F (135C). Imprinted with the standard biohazard symbol. Welded seams increase durability and protection. Bags feature an indicator that changes to read "AUTOCLAVED"…

Economical solution for autoclaving and safe disposal of biohazard wastes. Transparent polypropylene; 0.03mm (1.5 mil) thick Pass ASTM 1709 Dart Impact and ASTM 1922 Tear Resistance Tests High temperature autoclavable at a maximum of 135°C (275°F) Sterilization patch darkens…

…barrier of any Kapak by Ampac stock pouch. FoilPAK pouches can withstand temperatures up to 130°C (266°F), and can be used in autoclave applications with over-pressure at cool down. Size: 5" x 8" Capacity: n/a Thickness: 4.5 mil Pouch Format: Flat…

…Standard BA6041 & BA6141 Stomacher® Bags, Seward Bag Clips allow fast and easy securing of the Stomacher® bags. Eliminates any leakage during storage or incubation Provides a reusable alternative to closure bags Easily cleaned with most lab disinfectants (not autoclavable)

HDPE Film w/ Indicator, Flat Pack, Twist Ties.

Polypropylene Film w/ Indicator, Flat Pack, Twist Ties.

…or user error. Propper recommends O.K.® Sterilizer Bags for use within wrapped sets or containment devices as a better alternative to paper-plastic pouches. All-paper bags due to steam penetration through all sides of the bag allow for adequate air removal, steam contact, and drying. For…

…strip confirms sterilization Autoclavable to 125°C or 160°C Indicator strip turns black after correct steam processing Available in two sizes 1304Q05 and Q07 are suitable for sterilization of pathogenic material The bags have been developed to meet all…

Self-sealing edges, need no additional closing devices Bags are constructed of paper Have a useable size of 10" x 2.5" x 1.5" for instruments.

Econo-Guard polypropylene autoclave bags are ideal for processing hazardous materials. Polypropylene bags can withstand higher temperatures of 275°F (135°C) Imprinted with the standard biohazard symbol Welded seams increase durability and protection Bags feature an indicator…

Autoclavable bags have one long flap to facilitate easy opening. When picking up individual pieces of waste that need to be discarded, the bag is turned inside out, over the hand, then turned right side out with waste safely inside the bag. Measures 22 x 28cm (8 1/2 x 11"). 100 per pack. …

Dishwasher and autoclave safe, the reusable Clavies® Biohazard Bag Holder Cover opens quickly and easily by pressing the built-in release tab – no batteries required! The cover fits both the Medium and Large sizes of the Clavies® Biohazard Bag Holders (F13192-0002 and F13192-0003) and…

…the gathered top of an autoclave bag. Clip permits bag to safely vent internal pressure during autoclaving. After autoclaving, clip holds the processed bag closed for final disposal. The closed internal dimension of the clip is 7/16", suitable for small autoclave bags ranging in size from bench-top…

…dish washers; autoclavable. Cover provides compliance with 29 CFR 1910.1030(d)(2)(xiii)(A), which requires a cover on any container used to store, transport, or ship biohazardous wastes Includes 100 Bench Top Biohazard Bags (1304Q21); can also be used with Clavies Autoclavable Bags (0209N80)

Neutralize Autoclave Odors with a Choice of Four Fragrances Heat-released deodorant pads neutralize autoclave odors with one of four pleasant scents. Simply open foil pouch and place pad in bag prior to autoclaving Pads have a three year life span; will last longer if stored in a…