Re-suspend protein and DNA pellets or grind soft tissues in micro centrifuge tubes Pestles can be hand operated or motor driven Autoclavable types available Ideal for cell and tissue culture preparation Choose the best pellet pestle for your applications RNase-, DNase- and Pyrogen-free …

Developed in the laboratories of Julius Hyman and Company for the concentration of trace amounts of sample dissolved in organic solvents. It is very useful in sample preparation before analysis with solvents such as petroleum ether or hexane. Preparation involves filling the flask to between…

Used for dispensing a fixed volume of liquid into vessels with small openings. 675300 polyacetal Standard Taper clamp (one included) secures flask and head All-glass apparatus manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type…

The narrow annular space of the West design provides high cooling efficiency due to the increased flow rate of the cooling medium. Full length 24/40 joints Standard Taper outer joint at the top and Standard Taper inner drip joint at the bottom Manufactured from 33 expansion, low…

Gravity chromatography column manufactured from medium wall tubing with PTFE stopcock and in-line reservoir for containing liquid buffer Standard Taper joint size 24/40 These gravity columns may be used alone or in combination with 420575-2440 flow control adapter A coarse porosity glass…

The KONTES® DISPOSAFLEX® column is an inexpensive, multi-purpose column designed to satisfy a wide range of analytical separations using aqueous buffers. A typical application of the Disposaflex® column is the extraction of the cyclic nucleotides cAMP and cGMP from sample preparations…

Has separate reflux overflow tube Graduated in 1/10 ml divisions from 0 to 1 mL; in 1/5 mL divisions from 1 to 10 mL With 24/40 joints; meets ASTM Standard E 123 Specialized for determination of water in emulsified asphalts With Standard Taper24/40 joints and reflux overflow…

Extractor body only, used as component part of 585050 Soxhlet extraction assemblies. Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements

Columns are supplied complete with glass barrel, 2 end fittings with 20 μm porosity HDPE bed supports, and screw caps Each column is also supplied with 5 feet (1.5 m) of FEP PTFE tubing (1/16” OD with 1.0 cm; 1/8” OD with 2.5 and 4.8 cm), 2 flangeless tubing nuts and 2 flangeless…

The reinforced top and tooled lower end of this KIMAX® column provide extra strength and a tight, leakproof fit with an all-PTFE stopcock. An o-ring has been added under the PTFE fitment to maintain a liquid-tight seal over a large temperature range (0-100 °C) Liquid contacts…

Combines both conical and cylindrical surfaces to effectively reduce tissue and produce a uniform homogenate Ideal for connective tissue, such as muscle, heart and lung Clearance between pestles and tubes is 0.004 to 0.006 inches* Pestle can be motor driven (see Thomas number…

This three-position linear solvent recovery system is intended for use with Kuderna Danish evaporative concentrators. Heating mantle, controller, splash guard, clamps and supports provided with the complete system Power: 15 amps – 120 volts Refrigerating circulator recommended…

All-glass construction with ground tube Ideal for connective tissues Clearance between pestles and tubes is .004 to .006 inches* Pestle can be motor driven (see Thomas number 3411E25 for Drive Unit) Available in working capacities of 1, 5, 8, 17 and 45 mL . * Stated clearances…

For use with hybridization incubators with rotors Reduced probe volumes Perform Northern, Southern or Western blots Include caps with silicone O-rings Tubes provide a cleaner and safer alternative to hybridizing in bags. Use only approximately 5 mL of probe per blot. Multiple…

Ideal for use in place of a sand bath in microscale experiments. Excellent heat transfer Does not interfere with magnetic stirring

Excellent for storage of hygroscopic chemicals, and to prevent adsorption of moisture when using crucibles, weighing bottles, and watch glasses. Plastic screw-thread top cap for easy cover removal Recessed base for containment of desiccant Includes metal plate Manufactured from…

Provides dual entry into a variety of flasks BEVEL-SEAL adapters allow temperature measurements at either top outer opening. Useful for reflux with addition- type reactions. Adapter consists of two female standard taper joint fittings at the top and one male standard taper joint at the bottom.…

This closed system tissue homogenizer (tube with pestle) is non-sterile and packaged in a bulk pack configuration.

Three-prong extension clamps hold objects ranging from 0.80 to 89 mm securely and safely. Two separate adjustment screws ensure even, precise pressure on glass to minimize the chance of breakage Clamp is easily adjusted to vary holding angle and distance from the stand Jaws are coated…

Similar to 3432N01 series, but with PTFE pestle and an unground glass tube Ideal for soft tissue such as brain or liver Clearance between pestles and tubes is .004 to .006 inches* Pestle can be motor driven (see Thomas number 3411E25 for Drive Unit). Available in working…

A Standard Taper clamp made of corrosion-free stainless spring wire.

Solvent bottle adapter Economy three-hole cap Inlet/sparge filter Safety system 3 combines a three-hole cap, solvent bottle adapter and a combination inlet/sparge filter to eliminate the safety hazards of aluminum foil wrapped solvent containers. Solvent bottle adapter converts GL-45…

Apparatus is for determining the proteinaceous nitrogen content in water. It is also useful for preparing small quantities of distilled water. Apparatus can be used for phenol, selenium and fluoride determinations. It has 24/40 Standard Taper joint and a #2 hose connection. Unit measures 595 mm H x…

Gravity chromatography column manufactured from medium wall tubing with 821000 PTFE stopcock Similar in design to the 420530 series 40-60 micron porosity glass frit at the lower end to act as a support for column packing material Replacement stopcock plug is 821001 Manufactured from 33…

Selected to give the best fit to Pellet Pestles, Thomas 3411D75 series Constructed of autoclavable polypropylene Available in blue or natural color

This apparatus combines two analytical techniques, Soxhlet extraction and Dean-Stark azeotropic distillation, into a single process for the removal of water, chlorinated dibenzo-p-dioxins (CCDs) and chlorinated dibenzofurans (CDFs) from wet particulate samples. Determination of water and…

For connecting inert gas and vacuum sources Stopcock has metering groove cut into the plug to provide fine control of vacuum and inert gases. Distance between stopcocks is 65 mm for 8651N01 and 100 mm for 8651N03. Include patented pressure/vacuum retainers. Dimensions (mm): 8651N01: 230 L x…

Flow adapters Flow adapters can significantly improve FLEX-COLUMN® performance by protecting the gel bed from disruption during sample loading and by eliminating any dead volume above the gel bed.  Ideal for concentration and pH gradients, reverse flow separations and gravity…

Angled two neck round bottom flask. Two-neck heavy wall flask with 24/40 Standard Taper outer joints Side neck is angled Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements

For use in many refluxing operations, including Soxhlet extractions. Straight outlet tube at top Water-cooled Standard Taper inner drip joint at bottom Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements

Without stopcock 5579M10 Buret is graduated from 0.5 to 50 mL in 0.1 mL divisions, tolerance ±0.10 mL.