Digital, Digital Thermometers, Chemicals
-
Accurately measures temperature in freezers, refrigerators, incubators, water baths and heating blocks Enclosed “temperature buffered” sensor Range: -50 to 70°C (-58 to 158°F) Resolution: 1°C; accuracy: ±1°C Glycol bottle insulates sensor from…
-
Thomas Traceable Long/Extra Long Stem Digital Thermometers
labForce® (powered by Thomas Scientific)Chemical resistant probe Safer than mercury thermometers Display type: Large, bright 0.25" Display, 3.5-digit LCD Resolution: 0.1°; 1° above 199.9° and below -19° Probe diameter: 0.14 in Battery: 1 1.5V battery Switchable thermometers fit into cuvettes,…
-
Shockproof, pocket size thermometer is ideal for lab, plant, and field use New microchip design Type-K probe supplied -50 to 750°C or -58 to 1382°F New microchip design provides ultra low cost unit. Wide-range, fast-response, and one-switch operation make it the…
-
Traceable® Food/Waterproof/Piercing Thermometer
labForce® (powered by Thomas Scientific)Drop-proof from 5 feet Temperature range is -58° to 536°F and -50° to 280°C Accuracy is ±0.4°C or ±1°C between -20° to 100°C Resolution is 0.1° from -20° to 200° (1° outside this range) Stainless steel probe is…
-
Temperature range is -40° to 176°F or -40° to 80°C Resolution is 0.5° Accuracy is ±1°C Minimu/maximum memory/time of day Unit dimensions are 3 9/16” x 3 9/16” x 15/16”. Sensor measures 3/16” in diameter and 1 1/2”…
-
Thomas Traceable Digital Thermometer
labForce® (powered by Thomas Scientific)Dial thermometer Readings updated every 10 seconds 4-3/4 inch stainless steel probe Range is –58 to 572°F and –50 to 300°C Resolution is 0.1° Accuracy is ±0.4°C or ±1°C Dimensions: 4-3/4-inch stem length, stem diameter of 0.19 inch and…
-
Ideal for indoor/outdoor use Minimum/maximum memory Temperature range is -58° to 572°F and -50° to 300°C Display Type: 3.5-digit LCD, 1/4" H digits Traceable® Lollipop thermometers are suitable for use indoors or outdoors, in wet labs and virtually all…
-
NIST Certified Includes calibration certificate Includes insertion probe Pt100 Platinum according to EN 60751 Range -100° to 300°C & -140° to 570°F Accuracy ±0.2°C -30° to 110°C & ± 0.5°C below -30°C & ±…
-
5” Stainless Steel Stem w/Probe Cover NIST Traceable w/Certificate C/F Switchable Range: -50°/150°C -58°/302°F Resolution: 0.1° Accuracy: ±1.0°C between -20° to 120°C SUPRA model: ±0.2° 0.5° @ Test Points
-
Traceable® Snap-In Module With Probe
labForce® (powered by Thomas Scientific)Temperature range is -58° to 572°F and -50° to 300°C Resolution is 1° Accuracy is ±1°C between -20° to 100°C Minimum/maximum memory Display type: 0.75" Display, 3.5-digit LCD Battery: One 1.5V battery Modules measures 1 1/2” x…
-
Traceable® Infrared Thermometer with Trigger Grip
labForce® (powered by Thomas Scientific)Temperature range is -76° to 932°F and -60° to 500°C Resolution: 0.1° (-9.9 to 199.9); 1° otherwise Accuracy: ±2% of reading or ±2°C, whichever is greater Laser sighting Probe min/max temp: -83 to 2552°F, -64 to 1400°C Display Type:…
-
Thomas Traceable Jumbo-Display Dial Thermometer
labForce® (powered by Thomas Scientific)Thermometer reads both °F and °C Dedicate this thermometer to a specific test. Provides continuous monitoring for over a year. To provide for even longer battery life, the unit has an on/off switch. Thermometer is switchable between °F/°C. Wide range of –58 to…
-
NIST Traceable w/Certificate Dual Display... Indoor - Outdoor Minimum / Maximum Memory Outdoor Sensor Cable Length 10 feet C/F Switchable Range: 0° /50°C & 32°/122°F Indoor -50° /70°C & -58°/158°F Outdoor Resolution: 0.1° …
-
Screen displays current, minimum and maximum temperatures Probe in bottle of insulating medium
-
3 1/2” Stainless Steel Stem w/Probe Cover Waterproof Minimum/Maximum Function NIST Traceable w/Certificate C/F Switchable Range: -50°/300°C & -58°/572°F Resolution: -20° to 200° = 0.1°, outside range 1.0° Accuracy:…
-
Digital Benchtop Thermometer
Hanna InstrumentsFast and accurate readings All the features of 9338C05. One meter cable allows remote measuring NIST Calibration available; NIST certified versions calibrated at 2 points.
-
The Thermco waterproof pocket digital thermometer is suitable for use in research facilities and general laboratories while conducting wide range of experiments.
-
Traceable® Big Digit Four-Alarm Thermometers
labForce® (powered by Thomas Scientific)Four different alarm configurations for multi-use operation 4 alarms: over, under, between and outside Temperature range is -58° to 158°F or -50° to 70°C Resolution is 0.1° Accuracy is ±1°C Maximum/minimum memory, probe/ambient readings Jumbo 1 1/8” high digits can be read from across the…
-
Thomas Traceable Expanded Range Thermometer F/C
labForce® (powered by Thomas Scientific)Small, lightweight and shockproof Temperature range is -40° to 2000°F or -40° to 1200°C Resolution is 1° Accuracy is ±(1°C + 1%) from 0° to 750°C and 32° to 1382°F Thermometer comes with two Type-K probes. Unit measures 3”…
-
Traceable Robo Thermometer
labForce® (powered by Thomas Scientific)Adjustable for ultimate viewing Rotating digital display (180 degrees) makes for easy reading at any angle. Position the readout at a right angle for a heads-up display or straight to view sample and temperature simultaneously. Read temperatures in reagents, water baths, foods, air, and any…
-
Traceable® Waterproof Thermometer F/C
labForce® (powered by Thomas Scientific)Water-resistant remote probe thermometer is perfect for wet areas—case is IP61 rated and shockproof, and probe is impervious to acid and solvents. Probe with 10-ft (3-m) flexible cord makes it easy to take temperature measurements in hard to reach areas. Supplied with suction cups, magnet,…
-
Mini IR Thermometer
OaktonMinimum/maximum memory readings and Hold function Adjustable emissivity from 0.01 to 1.00 This pocket-size infrared thermometer takes surface temperature readings of any liquid, solid, or semi-solid in less than one second. Operation is simple?turn it on, point at sample, and take…
-
Traceable Big-Digit Thermometer
labForce® (powered by Thomas Scientific)Easy-view, 1 1/8"-high jumbo digits NIST traceable User selectable °F/°C Specifications: Meter measurement type: Digital indicator; Number of probe channels: 1; Temperature range: -58 to 150 F -50 to 70 C; Accuracy: ±2.0°F (±1.0°C); Resolution:…
-
5”x 0.14” Stainless Steel Stem w/Probe Cover Water Resistant Shock proof Minimum/Maximum Memory Hold/Test Function Head 1 3/4”dia. NIST Traceable w/Certificate C/F Switchable Ranges: Hi Temp Model: -50°/300°C & -58°/572°F Lo Temp…
-
12” Stainless Steel Stem w/Probe Cover NIST Traceable w/Certificate Minimum/Maximum Recall Range: -50°/300°C Resolution: -20° to 200° = 0.1°, outside range 1.0° Accuracy: ±1.0°C between -30° to 150°C
-
Traceable® Infrared Thermometer With Wristband
labForce® (powered by Thomas Scientific)Temperature range is -67° to 482°F and -55° to 250°C Resolution is 0.1° Accuracy is ±1°C +2% Minimum/maximum/memory/hold Emissivity is fixed at 0.95 and field of view is 6:1. Thermometer measures 4” x 2” x 3/4” and weighs 2 1/4…
-
Thermocouple Thermometer
CopelandTwo readings per second High accuracy Type K thermocouple connector NSF certified Model 32311 is an economy thermocouple thermometer that employs some of the latest high tech features. The thermometer offers 2°F/1°C accuracy over its operating temperature range of…
-
Traceable® Two-Channel Thermometer With Offsets
labForce® (powered by Thomas Scientific)Temperature range is -58° to 1999°F and -50° to 1300°C Resolution is 1° Accuracy is ±0.3% + 1°C Minium/maximum/memory/two channels/hold Thermometer comes supplied with two Type K probes. Adjustable offsets on two channels allow user to adjust…
-
DURAC® Calibrated Electronic Stainless Steel Stem Thermometers
H-B Instrument - SP SciencewareProbe Cover Protects Probe for Field Use Choose from a variety of features in these digital stem thermometers that are suitable for field studies, wet lab applications, wash down areas, food testing and tanks. Will read temperatures in liquids, semi-solids and gases 3 to…
-
Electronic Contact Thermometers
IKA Works3 operating modes Stainless steel sensors PID control The ETS-D5 and ETS-D6 provide precise temperature control without overshooting the set temperature. Thermometers are for use with all magnetic stirrers with contact thermometer bushings per DIN 12878. Units operate in three modes: Mode A…
-
4 1/2” Stainless Steel Stem w/Probe Cover Waterproof NIST Traceable w/Certificate C/F Switchable Range: -50°/150°C & -58°/302°F Resolution: 0.1° Accuracy: ±1.0°C between -20° to 120°C
-
Solar Thermometer
labForce® (powered by Thomas Scientific)Environmentally appealing Reads in Fahrenheit and Celsius Updates every ten seconds NIST Traceable ® Certificate supplied Reads from 0.0-160.0°F and -20-70.0°C with a resolution of 0.1° and an accuracy or ±1°. This thermometer is ideal for…