Thermometers Long Probe

Traceable® Extra-Extra Long-Probe Waterproof Thermometer Features: Extra-long probe, 20 inches (0.5 meter) created for deep vessels Thermometer is ideal for placing in large beakers/flasks, vats, pails, and drums Applications include foods, pharmaceuticals, industrial plants …

Chemical resistant probe Safer than mercury thermometers Display type: Large, bright 0.25" Display, 3.5-digit LCD Resolution: 0.1°; 1° above 199.9° and below -19° Probe diameter: 0.14 in Battery: 1 1.5V battery Switchable thermometers fit into cuvettes,…

…0.1ºC & F Bottles and thermometers have double magnets ºC and ºF Switchable Supplied with AAA alkaline battery, and a 9’ long Micro Cable Thermometer can be used to monitor ambient temperatures The Triple Display Digital Thermometer simultaneously shows the…

Economically priced thermometers have features found on more expensive instruments Wide temperature range Stainless steel probes 9329G00- Economically priced unit Temperature range: -58° to 302°F; resolution: 0.1°F (to 199.9°F) Has stainless steel stem for durability and compatibility.…

…70°C Resolution is 0.1° Accuracy is ±1°C Maximum/minimum memory, probe/ambient readings Jumbo 1 1/8” high digits can be read from across the lab. Size is 4” x 4” x 5/8”. The external probe is 0.2” in diameter x 2/3” long. The waterproof cable measures 3 1/2 feet long. Unit weighs 4 1/4 ounces.

Thermometers feature 5" long stainless-steel probes. Temperatures are shown on a dial display. Includes protective sleeve with pocket clip. This versatile 38mm (1-1/2") diameter thermometer features molded plastic dial, with temperature ranges of -20° C to +50° C, and 0° to 120° F, in 1°…

…±2°C Device offers minimum/maximum memory and hold features. Unit measures 7 1/8” x 2 3/4” x 1 1/4”. Probe is 8 1/2” long with 2/3” diameter with a 3 foot cable. Weight is 10 3/4 ounces.  Model 1235D33 has features similar to 1235D01 but with an…

Thermistor air probe with extra-long cord length.

…cost probe General purpose Thermocouple probe PVC-insulated probes are ideal for quick readings in hard to reach areas. With exposed junctions, probes have a time constant of 3 seconds; response time is 15 seconds. Small diameter 24-gauge (0.020" dia) wire probes are 3-ft long. Probes…

…1.5V battery Modules measures 1 1/2” x 2 7/16” x 1/2”. Probe diameter is 0.14” x 2 3/4” (including handle) and the cable is 10 feet long. Unit weight is 2 ounces. Thermometers are provided with an individually serial numbered Traceable® certificate from…

5” Stainless Steel Stem w/Probe Cover NIST Traceable w/Certificate C/F Switchable Range: -50°/150°C -58°/302°F Resolution: 0.1° Accuracy: ±1.0°C between -20° to 120°C SUPRA model: ±0.2° 0.5° @ Test Points

8” Stainless Steel Stem w/Probe Cover NIST Traceable w/Certificate C/F Switchable Range: -50°/150°C & -58°/302°F Resolution: 0.1° Accuracy: ±1.0°C between -20° to 120°C SUPRA model: ±0.2° & 0.5° @ Test…

8” Stainless Steel Stem w/Probe Cover NIST Traceable w/Certificate C/F Switchable Range: -50°/300°C -58°/572°F Resolution: -20° to 200° = 0.1°, outside range 1.0° Accuracy: ±1.0°C between -30° to 150°C SUPRA” model: …

8” Stainless Steel Stem w/Probe Cover NIST Traceable w/Certificate Minimum/Maximum Recall Range: -50°/300°C Resolution: -20° to 200° = 0.1°, outside range 1.0° Accuracy: ±1.0°C between -20° to 150°C

…Type T: ideal for cryogenic and ambient, -418 to 752°F Most probes have 316 stainless steel sheaths. Economy probes have 1” long nylon handle and 3 ft. long straight PVC cable. All others have 5 1/2” long molded handles and a 5 ft. coiled cable. Time Constant is noted as T.C.…

…Readings are updated every second. Stainless-steel probe is resistant to most laboratory chemicals. Long stem allows the user to make measurements while stirring solutions. It is ideal for use in deep vessels. Replaces mercury thermometers Plastic and stainless-steel construction (no…

12” Stainless Steel Stem w/Probe Cover NIST Traceable w/Certificate Minimum/Maximum Recall Range: -50°/300°C Resolution: -20° to 200° = 0.1°, outside range 1.0° Accuracy: ±1.0°C between -30° to 150°C

…stability, and repeatability Use our RTD probes to measure temperature when accuracy is important. All probes include a 5-ft PVC coiled cord with strain relief that protects from repeated flexing and tugging. Ergonomic, easy-grip 5" long glass-filled nylon handle provides maximum heat…

…and 6 preset meat categories Programming - Timer - History - LED monitor Delivered with two colored stainless steel probes Stainless steel piercing probe: 97mm ø4mm Silicone grip - cable: 150cm With hook In box, with instructions. range : -50+300°C / -58+572°F

Wide range Type-K Front-panel adjustable offset 0.1° resolution Type-K Workhorse Thermometer provides a sharp readout in dim and very bright light, long battery life (150 to 200 continuous hours), high accuracy, wide temperature range, and a new chip design. Type-K range is…

…is programmable in 1° increments. Visual and audible signals continue even if temperature returns to non-alarm range. Probe is 5/16 inch in diameter and 3/4-inch long. Ten-foot micro-cable permits refrigerator doors to close on it. Traceable to NIST for accuracy To assure accuracy an…

8” Stainless Steel Stem w/Probe Cover NIST Traceable w/Certificate C/F Switchable Range: -50°/300°C (-58°/572°F) Resolution: -20º to 200º = 0.1º, outside range 1.0º Accuracy: ± 1.0ºC between -30º to 150ºC …

An electronic thermometer with a flexible probe designed and priced to be a viable replacement for mercury filled glass thermometers, which are gradually being phased out of healthcare. The flexible probe provides greater patient safety and is ideal for pediatric applications. This new…

The testo 104 waterproof food probe thermometer comes with a wide range of features including a strong foldable form factor, a rubber-coated anti-slip surface, color coded markers to prevent cross contaminiation, and a long, precise temperature probe that make it ideal for use in the food industry. …

…Accuracy is ±1° between -20° to 100°C Stainless steel probe is 1/2-inch diameter and 1” long. Overall dimensions are 3/4” diameter x 3 3/4” and weight is 1/2 ounce. Thermometers are provided with an individually serial numbered Traceable certificate from…

…with bottle probe, 10 foot cable (patents pending)  1208T86:  Traceable® Platinum Hi-Accuracy Thermometer with minimum/maximum readings for last 24-hours, 7-days,  30-days with  probe (without bottle), probe is 5/16” in diameter x ¾-inch long, 10 foot cable…

…holder side to any surface. Digital-Bottle™ avoids mercury contamination Solid-state probe eliminates the difficulty encountered with mercury thermometer contamination. Probe is sealed in a miniature bottle filled with nontoxic glycol. Solution is GRAS (generally recognized as…

…thermometer requirements. Triple display simultaneously shows maximum, minimum, and current temperatures for either probe or ambient sensor. Min/Max monitors high/low readings overnight, on weekends, or for any time period—a significant advantage over current reading-only glass thermometers.…

Used in temperature applications requiring precise and stable readings, this DURAC® RTD Thermometer and Thermometer / Data Logger captures and displays maximum/minimum temperatures for long term sample monitoring with 99 built in memory locations. The unit displays current or logged readings,…

Adheres to most surfaces; kapton-insulated wire and industrial adhesives for high temperature and long-term durability Use with any Oakton Digi-Sense and Acorn thermocouple thermometer Junction: grounded; 5 second response time 2 x 1 inch probe surface No nylon handle and 5 foot L wire

The TM26 is an NSF certified Temperature Indicator with long stainless steel penetration probe for measuring in liquids, pastes, and semi-solid food. Ideal for use in food industry, agriculture, and laboratories. Thermometer can be used on desktops with its removable foot stand or can be mounted on…

…polypropylene surface may be marked with identifying sequence numbers Autoclavable 0209X17: Thermometer Holder for Beakers Easy-to-use, polypropylene clips hold thermometers and probes from 3.2 to 11mm (1/8 to 7/16") in diameter securely in place. Fits onto the rims of…