White, test tube
-
Unwire™ Half-Racks: Resmer™ Manufacturing Technology
Thermo Scientific NalgeneConstructed with Thermo Scientific™ Resmer™ Manufacturing Technology. Racks are repeatedly autoclavable. Smooth finish leaves fewer places for contaminants to lodge; no welds to break, no sharp edges. Endplates accept large labels. Rack withstands most lab chemicals and…
-
Polypropylene Test Tube Racks
BrandTech®Polypropylene racks snap together for easy assembly, sturdy construction, stackable, and are available in four colors. Will not float in waterbath. Alphanumerical positions for clear sample identification. Wide spaces between positions. Operating temperature -20 to 90°C. Autoclavable at 121°C.
-
No-Wire Test Tube Grip Racks
SP Bel-ArtTest Tubes ‘Hang in There’ in Any Position, Even Inverted! Retainer fingers hold tubes firmly in the rack plates with no fear of dislodging, making them perfect for both decanting and water bath work. • Fingers allow simultaneous decanting to save valuable…
-
30mm, 24-Place Plastic Test Tube Racks
Globe ScientificPerfect for 50mL Centrifuge Tubes. Dimensions: 300 x 112 x 85mm Racks are shipped flat for easy storage Easy to assemble: simply fold and snap together securely Racks are Autoclavable at 121°C for 20 minutes Can be used dry, wet or in water baths and will not float …
-
Constructed of a special blend of polypropylene, these autoclavable racks will sink in a water bath Interlocking feet allow racks to be stacked while not in use Racks feature end plates for labeling. Rows are numbered and lettered for tube identification. Outside dimensions: 9.7” x…
-
Test Tube Rack Unwire™ Wht 16 mm
Thermo Scientific NalgeneFull-size Unwire test tube racks securely hold a full load of test tubes or centrifuge. Up to 72 of the smaller diameter tubes can be held at once. Molded in six bright, permanent colors Resmer™ manufacturing technology makes these racks keep their bright colors longer. Useful in a wide…
-
Unwire Polypropylene Test Tube Peg Racks
Thermo Scientific NalgeneAutoclavable Consists of an array of pegs spaced to hold tubes while allowing full view of contents Pegs convenient for holding inverted tubes for drying When racks are inverted, ribs keep tubes off base to allow drainage through holes 9260B01 and B13 are 13 mm with an array of 8 x…
-
Scienceware® Stack Rack® Test Tube Racks
SP Bel-ArtMatch Rack Material to Lab Use These sturdy, rigid racks feature interlocking end plates with handles for secure stacking when loaded with tubes up to 10cm (4") long. Rows are numbered and lettered for easy tube identification. All racks are steam autoclavable at 121°C (250°F). …
-
Unwire Polypropylene Test Tube Racks
Thermo Scientific NalgeneReady-to-use No assembly required Provides an unrestricted view of tubes Available in 2 sizes: 13 and 16 mm and four colors: white, blue, green and red. Do not autoclave.
-
OneRack® Half-Size Delrin® POM Test Tube Racks
Heathrow ScientificExtra tough to resist most acids, solvents, and heat. Extra-tough storage for smaller spaces. These durable racks are molded in a single, continuous piece—no assembly required and no detachable pieces. Racks are made of Delrin® fiberglass-reinforced polyoxymethylene (POM), an…
-
Test Tube Rack Unwire™ Wht 13 mm
Thermo Scientific NalgeneFull-size Unwire test tube racks securely hold a full load of test tubes or centrifuge. Up to 72 of the smaller diameter tubes can be held at once. Molded in six bright, permanent colors Resmer™ manufacturing technology makes these racks keep their bright colors longer. Useful in a wide…
-
Unwire Half-Racks For 30 mm Test Tubes
Thermo Scientific NalgeneMolded of glass-reinforced polyketone No vinyl or epoxy coating to chip or scratch Assorted colors available Racks are molded in one-piece in a 3 x 3 array. The three-tier design has letters and numbers to identify tube locations.The racks’ thermal properties allow both autoclaving and…
-
Unwire Half-Racks For 25 mm Test Tubes
Thermo Scientific NalgeneCannot rust, chip or scratch Letters and numbers identify tube locations Assorted colors available These racks are similar to 9259J65 series, but are half the size to accommodate tubes up to 25 mm diameter. They have a 4 x 4 array and are molded of glass-reinforced polyketone. The racks’…
-
Rugged racks are molded of autoclavable polypropylene. Footprint dimensions fit many different auto samplers. The rack can sink in a water bath and remain stable even in agitated water. Each rack features end plates for labeling as well as numbered and lettered rows for tube identification.…
-
Full-View Test Tube Supports
SP Bel-ArtHold More Tubes, Waste Less Space This versatile polypropylene rack has pins for supporting or draining test tubes. Stores test tubes upright, full or empty Holds inverted test tubes over pins for draining The rack with 102 pins, 5 x 16 rows (9259G50), is excellent for drying…
-
Autoclavable Rows are numbered and lettered Base plate has rounded wells with drain holes. Molded cutouts in end panels form handles. 9259L10 and L20 are 213 x 110 x 111 mm high; 9259L30 through L50 are 213 x 110 x 127 mm high.
-
Scienceware® No-Wire™ Test Tube Racks
SP Bel-ArtGreat alternative to wire racks Stackable Available for 6 standard tube diameters Available in 3 colors Dimensions: 246mm x 104mm x 64mm high (9.7" x 4.1" x 2.5") Autoclavable at 121°C (250°F) Rugged racks are molded of autoclavable polypropylene. Footprint dimensions…
-
Polycarbonate Test Tube Racks
United Scientific SuppliesPolycarbonate racks feature ergonomic design for easy handling. Provides good chemical resistance. Autoclavable and withstands temperatures from -135°C to 135°C. Includes molded-in numbers and letters for easy identification of test tubes.
-
Unwire™ Test Tube Racks: Resmer™ Manufacturing Technology
Thermo Scientific NalgeneSmooth finish leaves fewer places for contaminants to lodge; no welds to break, no sharp edges. Endplates accept large labels for easy identification of samples. Higher specific gravity than water so it stays submerged in a water bath and won't float. Withstands most lab chemicals and…
-
12 - 13mm, 90-Place Polypropylene Test Tube Racks
Globe ScientificDimensions: 246 x 105 x 64mm Racks are shipped flat for easy storage Easy to assemble: simply fold and snap together securely Racks are Autoclavable at 121°C for 20 minutes Can be used dry, wet or in water baths and will not float Special design allows…
-
20 - 21mm, 40-Place Polypropylene Test Tube Racks
Globe ScientificDimensions: 246 x 105 x 72mm Racks are shipped flat for easy storage Easy to assemble: simply fold and snap together securely Racks are Autoclavable at 121°C for 20 minutes Can be used dry, wet or in water baths and will not float Special design allows…
-
25mm, 40-Place Polypropylene Test Tube Racks
Globe ScientificDimensions: 295 x 125 x 85mm Racks are shipped flat for easy storage Easy to assemble: simply fold and snap together securely Racks are Autoclavable at 121°C for 20 minutes Can be used dry, wet or in water baths and will not float Special design allows…
-
16 - 17mm, 60-Place Polypropylene Test Tube Racks
Globe ScientificDimensions: 246 x 105 x 72mm Racks are shipped flat for easy storage Easy to assemble: simply fold and snap together securely Racks are Autoclavable at 121°C for 20 minutes Can be used dry, wet or in water baths and will not float Special design allows…