Test Tube Rack

Takes one test tube rack containing capped or stoppered tubes from 75 to 200 mm long Use existing test tube racks up to 12" x 5" (305 x 127 mm) Rack is secured in holder by lid which fits over threaded end posts and is adjustable in height above support platform. Knurled nuts are used…

This polyethylene rack will hold six test tubes, and has six drying pins. Sides are fully open for clear viewing. Rack has two 30mm and four 20mm holes, and is pre-assembled.

Test tube support with 7/8" diameter holes, holds 12 tubes.

This set contains twleve 24 mL glass test tubes with rubber stoppers, and a brightly colored two tiered test tube stand.

For high-visibility, this 6-place high-density polyethylene rack is end-supported by two columns. Top plate has 25 mm diameter holes; base has corresponding hemispherical wells Includes six vertical pins for tube drying Easy snap together assembly

…universal test tube rack clamp. All of the LabStrong Test Tube Half Racks can be placed in the EZ-Clamp Test Tube Rack Clamp. The test tube rack clamp features finger-tightening knobs on each end of the clamp that allow for variable tilting of attached test tube racks. By tilting the test tube racks…

Easy to release and mount racks made of durable stainless steel with adjustable angle and tube height support. Test tube racks are used with an optional universal platform.

The next generation test tube rack is here Holds 72 tubes Available in blue and white Made of autoclavable polypropylene Made in U.S.A. Dimensions: 9.5" x 5" x 2.6" Patent pending When using a SmoothRack a tube will never slip into an adjacent position,…

Wet/Dry Test Tube Racks. Polypropylene. These racks provide excellent stability with no tendency to float or move in circulating water baths. An alpha numeric grid reference on the top tier enables precise location in the rack of particular samples. Available in three colors (white, red and blue)…

…split-frame rack holds up to two different size tubes in the same rack and allows users to quickly switch grids to hold other sizes as needed. Each rack frame includes a set of grids in one size. Grid sets in alternate sizes can be purchased separately. 10mm to 30mm diameter test tubes fit…

Foam racks for test tube storage and protection during shipping These economical, charcoal gray, open-cell foam racks have a capacity for 50 tubes in a wide range of sizes. Ideal for storage on benchtops, in incubators and refigerators/freezers. Racks will float for use in waterbaths. Can be…

…locks 50 culture tubes securely Holds and locks 30 microcentrifuge and micro blood collecting tubes securely in racks More uniform incubation: Tubes may be pushed down into H20 bath while still being held securely in rack May be used in blood drawing trays-holds blood drawing tubes securely

…racks can be disassembled for easy storage when they are not in use. They are autoclavable. Options include: #TTRK-13: 90 Hole Rack for up to 13mm Tubes #TTRK-17: 44 Hole Rack for up to 17mm Tubes #TTRK-20: 21 Hole Rack for up to 20mm Tubes #TTRK-25: 21 Hole Rack for up to…

Polycarbonate racks feature ergonomic design for easy handling. Provides good chemical resistance. Autoclavable and withstands temperatures from -135°C to 135°C. Includes molded-in numbers and letters for easy identification of test tubes.

Polyfoam racks for PCR, microtubes and centrifuge tubes Eliminate expensive plastic floating racks with economical polyfoam floating racks. Easy to use in waterbaths or beakers. Inscriptions with  Identi-Marker  pens may be made for quick identification. Unique Features …

Polypropylene racks snap together for easy assembly, sturdy construction, stackable, and are available in four colors. Will not float in waterbath. Alphanumerical positions for clear sample identification. Wide spaces between positions. Operating temperature -20 to 90°C. Autoclavable at…

Heavy wire test tube racks includes a durable epoxy coating. Autoclavable.

…conical tubes fit 20mm racks; 50mL conical fit 30mm racks. No assembly is required; rack is ready to use. Securely hold a full load of test tubes or centrifuge tubes for 13, 16, 20, 25 and 30mm diameter sizes with Thermo Scientific™ Nalgene™ Unwire™ Test Tube Racks.…

…molded racks have a three-tier grid design. Polypropylene construction provides good chemical and thermal resistance. Autoclavable. Racks feature a 3/4" x 2-3/4" labeling area on two sides. Open design allows easy viewing of contents from all sides.Available in sizes that hold 13mm or 16mm tubes.…

…numbered and lettered for simple tube identification. Steam autoclavable at 121°C (250°F) Made of polycarbonate; with crystal clear decks – perfect for submersing in a water bath Interlocking end plates for safe stacking when loaded with tubes up to 10cm (4") long. End…

Heavy wire test tube rack includes a durable epoxy coating. Holds up to 36 tubes.

Test Tube Racks - Full Size, Pivoting Adjustable angle, custom tilt Stainless steel holder includes removable rack Inside Rack Holder: 5.1L x 10.8W x 3.9H”(12.9 x 27.4 x 9.9cm) Outer Rack Housing: 5L x 10.9W x 5H” (12.7 x 27.6 x 12.7cm) Thomas No. 1217R41 …

1.5 to 15 mL tubes Holds six tubes or vials Compact footprint This height-adjustable rack securely holds up to six tubes or vials at any desired depth in a water bath or beaker. Rack features a flexible grip that easily retains mixed test tubes or varying weight and volume…

Sturdy Z-shaped rack made from a single sheet of heavy gauge Stainless 304. Rack features 25 wells in 5 rows, for tubes up to 16mm in diameter. Polished, smooth surface facilitates easy cleaning and labeling.

…Intelli-Mixer is equipped to perform each and every type of test tube mixing with brilliant efficiency. This versatile unit comes standard with a mixed test tube rack, supporting 0.5 to 50 ml test tubes. Additionally 8 optional racks are available, to satisfy your specific laboratory needs.…

Choice of Four Colors and Multiple Sizes Chemical and corrosion-resistant steel wire racks are coated with heat-cured epoxy. Orange racks can be used for biohazard warning, yellow for radioactive warning. Epoxy coatings are unaffected by organic solvents, salts, weak acids and weak…

… Rugged racks are molded of autoclavable polypropylene. Footprint dimensions fit many different auto samplers. The rack can sink in a water bath and remain stable even in agitated water. Each rack features end plates for labeling as well as numbered and lettered rows for tube identification.…

… Polypropylene - autoclavable and freezable to -80°C Ideal for preps and dilutions that are ultimately carried out in 96 well plates. Also used for large volume screening, HIV testing, cell harvesting and storage. Compatible with multi-channel pipettes and workstations.

…capacity Polypropylene - autoclavable and freezable to -80°C Ideal for preps and dilutions that are ultimately carried out in 96 well plates. Also used for large volume screening, HIV testing, cell harvesting and storage. Compatible with multi-channel pipettes and workstations.