Extra tough to resist most acids, solvents, and heat. Extra-tough storage for smaller spaces. These durable racks are molded in a single, continuous piece—no assembly required and no detachable pieces. Racks are made of Delrin® fiberglass-reinforced polyoxymethylene (POM), an…

Perfect for benchtop use or freezer storage, this compact, double-sided polypropylene rack accommodates 0.2ml thin-walled PCR tubes on one side while the opposite side holds 1.5ml to 2.0ml microcentrifuge tubes. 80 wells on each side keep tubes upright in a 5 x 16 array and are numbered for …

Sturdy racks for transport or sample handling These compact chemical-resistant, epoxy-coated steel wire racks have a slotted bottom for better drainage and handling. Ideal for conical centrifuge tubes but can be used to hold other types and sizes of tubes. The 15 mL rack has 20 mm holes; 50 mL…

Polycarbonate racks feature ergonomic design for easy handling. Provides good chemical resistance. Autoclavable and withstands temperatures from -135°C to 135°C. Includes molded-in numbers and letters for easy identification of test tubes.

Constructed with Thermo Scientific™ Resmer™ Manufacturing Technology. Racks are repeatedly autoclavable. Smooth finish leaves fewer places for contaminants to lodge; no welds to break, no sharp edges. Endplates accept large labels. Rack withstands most lab chemicals and…

These racks are designed to hold Labcon centrifuge tubes. Unlike foam racks, they are autoclavable and will not fall apart with repeated use. They can be frozen, and they stack together to minimize storage space. An interlocking design lets you connect more than one rack to create a handy work…

Keep single tubes upright in confined spaces Select among our three one-well racks--epoxy-coated steel wire racks, friction-fit polystyrene racks, or interlocking polypropylene racks. The autoclavable, epoxy-coated steel wire rack provides more friction with the benchtop for more secure…

The 96 Well "Reversible" Micro Tube Racks are designed so that one side of the rack accommodates 0.5ml microcentrifuge tubes. The reverse side holds 1.5ml to 2.0ml microcentrifuge tubes and screw cap microcentrifuge tubes. A great replacement for cardboard or metal freezer racks. …

This innovative, split-frame rack holds up to two different size tubes in the same rack and allows users to quickly switch grids to hold other sizes as needed. Each rack frame includes a set of grids in one size. Grid sets in alternate sizes can be purchased separately. 10mm to 30mm…

Each slot adapts to accommodate 12 - 30 mm (5 - 50 mL) tubes sizes and holds them in a firm upright position. Made from POM Holds different sized tubes in each slot Racks can be linked together for additional holding capacity Open sides allow for label viewing Flat…

Made of polypropylene The T100 BIOTUBE™ rack with standard 96-well on center spacing of tubes offers a color coding system using colored interchangeable plastic grids. These are used as a support for the 1.2 ml tubes. This unique grid stands on four legs and can be removed from the base…

Strong, tough, versatile, and attractive Autoclavable, fiberglass-reinforced polypropylene racks are ideal for bench work or storage of test tubes. Spacious peg design allows easy viewing of tube contents. User can also turn tubes upside-down and use as a drying rack! Fiberglass…

Microtiter format rack and tube system Resistant to most research chemicals Autoclavable up to 100 times Can be stored in temperatures as low as -80°C Holds tubes in an 8 x 12 format Ideal for all PCR applications: EIA, RIA, cell harvesting, etc. All components are…

These multi combination racks made of high-quality Polypropylene (PP) have a unique rotate and lock design that allows you to choose the size of the rack according to your needs. These fully autoclavable racks can withstand temperature range of -80 °C to 121°C and can accommodate tubes of various…

The chemical-resistant, HDPE-coated wire racks feature a slotted bottom and reinforced edges. These racks hold all brands and types of tubes, conical, round, flat bottom, plastic or glass. The square wells have three tiers so the tubes can fit securely in the racks. It is also Autoclavable and can…

Polypropylene racks snap together for easy assembly, sturdy construction, stackable, and are available in four colors. Will not float in waterbath. Alphanumerical positions for clear sample identification. Wide spaces between positions. Operating temperature -20 to 90°C. Autoclavable at 121°C.

Fully autoclavable Molded from reinforced nylon for strength and durability with no coatings to chip, peel, or rust Single piece, three tier grid design for secure and stable racking of tubes Good temperature and chemical resistance to withstand a variety of lab procedures Large, flat…

Fully autoclavable Manufactured from durable reinforced polypropylene (PP) Peg design allows easy viewing of tube contents Can be used to dry inverted tubes while minimizing collection of airborne contaminants Dimensions (L x W x H): 13mm: 179 x 127 x 64mm (7" x 5" x…

These reversible racks are designed to keep 0.5mL and 1.5mL( up to 2.0mL) microcentrifuge tubes organized and upright. Made of polypropylene, choose the blue rack for 60 tube capacity (5 rows of 12 tubes) or the larger orange rack for 96 tube capacity (8 rows of 12 tubes). Both racks have…

Close flat for compact storage! Pop up for quick use! Simple, easy action to open and close – expand and collapse when racks are needed. Designed to help organize 15 and 50mL tubes. Imprinted grid aids quick retrieval. Stack racks in open or closed position. Saves space when racks are not…

1.5 to 15 mL tubes Holds six tubes or vials Compact footprint This height-adjustable rack securely holds up to six tubes or vials at any desired depth in a water bath or beaker. Rack features a flexible grip that easily retains mixed test tubes or varying weight and volume…

Polystyrene construction. Leave both hands free for pipetting and other critical tasks Non-Grip Style safely supports a 50ml conical centrifuge tube and permits the tube to freely be removed Grip Style gently grips the tube and moves with the tube when it is lifted from the bench top

The next generation test tube rack is here Holds 72 tubes Available in blue and white Made of autoclavable polypropylene Made in U.S.A. Dimensions: 9.5" x 5" x 2.6" Patent pending When using a SmoothRack a tube will never slip into an adjacent…

The PCR Storage Rack, by Heathrow Scientific, offers a sleek and modern design that’s packed full of features. The patent pending design offers a unique lid the rack slides out from, and then rotates 180°, to become a convenient stand the rack sits on. Ergonomic textured finger grips…

Removable hinged lid lies flat Perfect for pre- or post-PCR sampling. Sturdy polypropylene rack accommodates individual tubes or strips of 8 or 12 tubes. Tube wells are easily identified with embossed numbers and letters. Available in natural, single colors, or assorted colors (one each of…

Excellent space-savers for use in water baths, laminar flow hoods, fume hoods or any place where space is limited. Choice of three colors: orange for biohazard warning, green and blue for general lab use. Chemical and corrosion-resistant steel wire racks are coated with heat-cured epoxy …

Autoclavable Durable polycarbonate Holds CryoTube vials and grips Nunc CryoTube vials with interlocking feet. Starfoot Cryotubes fit into grooves for one-handed operation.

Popular fraction-collector-plate style rack Easily fill and transfer 80 tubes in compact arrangement (5 x 16 array). Polypropylene rack has molded-in coordinates aid organization. Autoclavable. Assorted colors: blue, green, pink, yellow, and orange. Measures 225 x 67 x 28 mm.

Cannot rust, chip or scratch Letters and numbers identify tube locations Assorted colors available These racks are similar to 9259J65 series, but are half the size to accommodate tubes up to 25 mm diameter. They have a 4 x 4 array and are molded of glass-reinforced polyketone. The racks’…

Reinforced nylon rack is autoclavable and chemical resistant Fits 1.5mL and 2.0mL microtubes Single piece construction Molded handles facilitate secure handling Alphanumeric markings for sample identification Stackable Dimensions (L x W x H): 24-Place rack: 143 x 90 x 52mm…