Beaker Rack

Compare Tool

Select up to 3 products

Beaker Rack
1 - 32 of 39
Sort
View
Show
  • Poxygrid® Labware Drain Stand

    Bel-Art - SP Scienceware

    Dry Test Tubes, Beakers, Flasks, and Other Labware For drying test tubes, beakers, flasks, and other labware, this stand has rubber tipped feet for non-skid use on a tabletop, or wire loops on the back for wall mounting. Three rows of epoxy-coated hairpin-loop supports (14 in all) hold…

  • …Labconco washer racks, inserts or miscellaneous glassware. Accommodates up to two Labconco washer racks or four wire inserts. Alternatively, 48 adjustable and removable pins, 0.5" wide x 4.75" high (1.3 cm x 12.1 cm), may be arrange in the drawers to hold inverted flasks, beakers and other…

  • …with plugs (6 plugs included). Select from single and double-sided models with up to 76 peg locations to hold glass or plastic labware such as beakers, flasks, bottles, test tubes and cylinders. Two removable polyprobylene baskets can be used for bulk rinsing, drying, transport and storage of small…

  • …changer. Stirring is only possible from above with a rod stirrer (propeller stirrer). The rod stirrer TZ 1847 is included in the scope of delivery of the TW7400- and TL 7000-TW 7400 modules The sample rack with 42 sample positions is suitable for 150 ml beakers low form and 250 tall form.

  • Sample beaker, plastic (polypropylene, PP), 120 mL, Suitable for sample racks: 6.2041.470 6.2041.840 6.2041.850 6.2068.010 6.2068.020 6.2068.030 6.9920.141 250 pieces

  • …for additional buoyancy. Insert tubes from the top and easily remove them by pressing the rack down on the bench. Buoyant polymethylpentene rack is ideal for incubating microtubes in a beaker of water Withstands boiling for 30 minutes at 100°C (212°F) Steam autoclavable…

  • Scienceware® No-Wire™ Round Racks

    Bel-Art - SP Scienceware

    These No-Wire™ racks fit neatly into round containers such as ice buckets and beakers, as well as desiccators. Choose from two sizes; the large rack is ideal for use in round ice buckets such as Magic Touch™ and the small rack fits perfectly in a 1000mL beaker. Special blend…

  • …the Scienceware® Lab-Aire® II Drying Racks a practical solution for drying and storing labware. All models come with three size and length rugged V-channel pegs that can be moved and repositioned to hold a variety of labware, including beakers, flasks, bottles, test tubes and cylinders.…

  • …resistance Racks float with full load of filled tubes Molded handle in center of rack for comfort and support during transport Legs allow rack to stand upright for use on benchtopUse in ice, waterbaths or on the benchtop 65mm round rack fits most 400mL beakers Commonly found…

  • 48 Pos Rack F/50mL Beakers

    Thermo Scientific Orion

  • …height-adjustable rack securely holds up to six tubes or vials at any desired depth in a water bath or beaker. Rack features a flexible grip that easily retains mixed test tubes or varying weight and volume from 1.5 to 15 mL .  Unlike floating racks, this rack’s adjustable height…

  • …locations Raised handle for easy lifting without agitating samples Stable feet keep racks upright on the bench Use in water baths, ice or on the benchtop 95mm outer diameter fits most 1000ml beakers Optional vortexing attachment allows samples to be vortexed simultaneously Steam…

  • Polyfoam racks for PCR, microtubes and centrifuge tubes Eliminate expensive plastic floating racks with economical polyfoam floating racks. Easy to use in waterbaths or beakers. Inscriptions with  Identi-Marker  pens may be made for quick identification. Unique Features …

  • Rack Microtube Square PP 1.5 ml

    Thermo Scientific Nalgene

    racks have molded-in letters and numbers at each hole for easy sample identification. Square- and round-style racks for incubating 0.5 to 2.0mL microcentrifuge tubes at elevated or reduced temperatures in water or ice baths Round-style racks fit conveniently inside 400 or 1000mL beakers

  • …auto calibration through front panel. Note: Tank cover: included. For optimum cleaning results it is recommended to purchase the appropriate Bransonic® accessory best suited for your application needs. Branson offers perforated trays, solid trays, beaker covers, support racks.

  • Floating Foam Tube Racks

    Heathrow Scientific

    … polyethylene foam racks are ideal for floating tubes in water baths, tubs, or beakers. Closed-cell foam resists water absorption so racks can be washed and reused. The blue round rack features unique “X” slits to hold a variety of tube sizes. Racks include carrying handles—easy…

  • 28 Pos Rack F/150mL Beakers

    Thermo Scientific Orion

  • …numbered locations Raised handle for easy lifting without agitating samples Stable feet keep racks upright on the bench Use in water baths, ice or on the benchtop 95mm outer diameter fits most 1000ml beakers Also available without vortexing attachment and in 3 other colors Steam autoclavable at…

  • Funnel Support Rack

    Accurate Wirecraft

    Adjustable shelf will accommodate a variety of funnel lengths and flask or beaker sizes. Rack is constructed of vinyl-coated heavy gauge wire. The rack holds twelve 2" to 4" diameter funnels. Dimensions: 16.25" H, 25.375" W, 10.75" D

  • …two-year warranty SteamScrubber Glassware Washers have stainless steel top and bottom racks that accommodate basket inserts for a wide variety of glassware shapes and sizes, primarily beakers and other wide-mouth glassware. Specialized inserts for BOD bottles, petri dishes, culture tubes…

  • Deluxe Chemistry Hardware Assortment

    United Scientific Supplies

    …porcelain and other hardware most commonly used in general chemistry labs and includes the following:  Beaker, Glass, 100ml (1), Beaker, Glass, 250ml (1), Beaker, Glass, 400ml (1), Beaker, Glass, 1000ml (1), Bottle, Wash, 125ml, Plastic (1), Clamp, Burette (1), Clamp, Mohr's Pinchcock (1),…

  • Plastic 150mL AutoTration Beaker

    Thermo Scientific Orion

    Container Size: 150mL  Positions: Choice of 48- and 28-position racks

  • Wire Drying Rack

    Heathrow Scientific

    Saves glassware from chips and cracks Drain and dry test tubes, beakers, flasks, and other labware. Place selfstanding rack on a table or near a sink. Or, use hooks to hang rack on the wall. Holds up to 90 pieces of labware on eighteen 127 mm pins and seventy-two 76 mm pins. Constructed of…

  • …tube tops from popping open during boiling Holds up to twelve 1.5ml or 2.0ml microcentrifuge tubes in numbered locations Fits most 1000ml beakers Optional vortexing attachment; allows samples to be vortexed simultaneously Polypropylene construction; steam autoclavable at 121°C…

  • Round Microcentrifuge Floating Racks

    Bel-Art - SP Scienceware

    Perfectly Sized for Beakers Molded of steam autoclavable polypropylene, these racks fit 400ml or 1000ml beakers. Choose from 8 or 20 place racks with 10.8mm holes for 1.5ml microtubes. Tubes remain completely immersed in a beaker while tops rest above the rack Unload by lightly…

  • Plastic Labware Value Set

    United Scientific Supplies

    …Contains: 5 Beakers (50ml, 100ml, 250ml, 500ml and 1000ml), 7 Graduated Cylinders (10ml, 25ml, 50ml, 100ml, 250ml, 500ml, and 1000ml), 4 Unitary Wash Bottles (500ml), 6 Square wide mouth storage bottles (500ml), 3 Erlenmeyer Wide Mouth Flasks with cap (250ml), and 1 Test Tube Rack with 12 tubes.

  • …use. Two strong magnets, mounted on back, secure unit firmly in place. Detachable probe is 8.5” long with curved neck that hooks over beaker, rack or vessel. Cable length is 3.5 feet. Includes replaceable AAA battery for one year “always on” monitoring. Unit built of high-impact,…

  • Maxi Mix III Rotary Shakers

    Thermo Scientific

    …The Flask Holder (8289M90) can accommodate up to four 250 mL flasks at one time. The Universal Holder (8289M95) accepts flasks, beakers, bottles and test tube racks between the two adjustable rubber rollers. Accessories 8289M80 Foam Top (included with base units) for vortexing test…

  • …to hold tiny parts.  These baskets fit inside beakers. Beaker supports and beakers Flat stainless steel tank covers with 1 or 2 holes support either 600 mL or 1000 mL beakers.  The beakers come with plastic lids. The beaker assembly can be used with flammable solvents when…

  • …the bag will stand completely by itself. No rack or other holder is needed to keep the bag upright. When the sample is placed inside, the special gusseted bottom flattens out, allowing the bag to stand up on its own. It works just like a beaker or bottle, however, it costs less, is sterilized,…

  • CHEMISTRY HARDWARE ASSORTMENT

    United Scientific Supplies

    …following Contents: Beaker Tongs, Burette Clamp, Burner Tripod, 3" ring, 9" legs, Mohr's Pinchcock Clamp, Clamp Holder, Right Angle, Clay Pipe Triangle, 2", Crucible Tongs, Nickel-plated Steel, 9" Ring Support with Clamp, 4", Support Stand with Rod, 5" x 8" / 24" rod, Test Tube Rack, Plastic, holds…

  • …Slants 6mL 1 Pipet, Sterile, Disposable 1 pkg Cotton Swabs, Sterile Materials Needed but not Supplied: Large beaker Hot plate or waterbath Microwave (not necessary if melting agar in a waterbath) Markers Microfuge tube racks Container of ice Recommended: Incubator (37°C) DOT Info: Non-regulated

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.