Autoclavable Test Tube

Compare Tool

Select up to 3 products

Autoclavable Test Tube
1 - 32 of 170
Sort
View
Show

  • KIMAX Test Tubes With Marking Spot

    Kimble

    With marking spot and deep form, black phenolic plastic caps with cemented rubber liners Caps are autoclavable; see 9210R18 series for conditions (unattached) Listings indicate tube length x o.d. in mm

  • Kim-Kap Test Tube Caps

    Kimble

    Polypropylene closure Autoclavable Natural For use with the KIM-RAK or other disposable culture tubes.

  • 11 x 70mm Test Tubes

    Globe Scientific

    …multi-use test tubes. They are molded from premium grade polystyrene for clarity of polypropylene for impact strength and stability to common acids, alkalies, and solvents. Polystyrene tubes can withstand 1500 RPM during centrifugation. Polypropylene tubes can withstand 3000 RPM and are autoclavable

  • 16 x 150mm Test Tubes

    Globe Scientific

    …multi-use test tubes. They are molded from premium grade polystyrene for clarity of polypropylene for impact strength and stability to common acids, alkalies, and solvents. Polystyrene tubes can withstand 1500 RPM during centrifugation. Polypropylene tubes can withstand 3000 RPM and are autoclavable

  • Aluminum Test Tube Baskets

    Heathrow

    Ideal for washing and storing test tubes Use these lightweight yet strong baskets with mechanical washers and autoclaves. Durable construction will withstand repeated use in the lab.

  • Scienceware® Poxygrid® Test Tube Racks

    Bel-Art Products

    …warning. Epoxy coatings are unaffected by organic solvents, salts, weak acids and weak alkalis Will withstand a temperature range of -223°C (-369°F) to 121ºC (250°F); autoclavable All racks have square holes, three decks, a slotted grid bottom and reinforced edges

  • Test Tube Baskets For Washing and Autoclaving

    Thermo Scientific Nalgene

    Constructed of polypropylene Baskets hold test tubes, centrifuge tubes and bottles Designed for autoclaving, washing and incubating Each basket comes with a permanently attached lid. Tapered sides allow baskets of the same size to nest for storage. Slotted to allow complete drainage and…

  • Polypropylene Test Tube Racks

    BrandTech®

    …racks snap together for easy assembly, sturdy construction, stackable, and are available in four colors. Will not float in waterbath. Alphanumerical positions for clear sample identification. Wide spaces between positions. Operating temperature -20 to 90°C. Autoclavable at 121°C.

  • Culture Tubes, KIM-KAP®, Polypropylene Closures, Autoclavable, Color Coded

    Kimble

    Color Coded - natural, red, green, yellow and blue

  • Test Tubes

    Globe Scientific

    test tubes. They are molded from premium grade polystyrene for clarity or of polypropylene for impact strength and stability to common acids, alkalies, and solvents. Polystyrene tubes can withstand 1500 RPM during centrifugation. Polypropylene tubes can withstand 3000 RPM and are autoclavable and…

  • BioPette™ Plus Autoclavable Pipettors

    Labnet

    …for pipetting into narrow tubes. The BioPette™ Plus pipettes are fully autoclavable. Eight models cover the volume range from 0.1 μl to 10,000 μl. A calibration tool is included with each unit for easy in-lab recalibration. Pipettes are individually tested and supplied with a certificate…

  • Test Tube Basket

    United Scientific Supplies

    These test tube baskedts are made of polypropylene. These autoclavable, unbreakable, and non-corrosive baskets are ideal for rinsing and draining glassware. They are also useful for storage of test tubes or culture tubes during sterilization or incubation.

  • EZ-Clamp Test Tube Racks

    LabStrong

    test tube half rack is molded of autoclavable polypropylene and features a convenient end plate for labeling as well as numbered and lettered rows for tube identification. Tool free assembly of molded rack takes only seconds with fold up sides and end bars that lock into rack tops. The test tube

  • Test Tube Stands

    Globe Scientific

    Fully autoclavable Manufactured from durable reinforced polypropylene (PP) Three tiered design holds tubes securely Sturdy handles facilitate easy transport 4 Color options for organization of samples or benchtop

  • Biotransport Test Tube Carrier

    Thermo Scientific Nalgene

    Designed for transportation of potentially hazardous materials in racks Constructed of clear polycarbonate with a silicone gasket Autoclavable Four polysulfone clamps securely lock the top and bottom together. Dimensions: 19” x 6” x 6” (495 x 165 x 170 mm). …

  • Tiered Test Tube Racks

    Bel-Art Products

    …solid bottom platform holds tubes from 10-13mm and keeps them stable. Compact rack keeps test tubes upright and organized Includes convenient holes for mounting to benchtop Made of durable, high density polypropylene; heat and chemical resistant Autoclavable at 121°C (250°F)

  • Polycarbonate Test Tube Racks

    United Scientific Supplies

    Polycarbonate racks feature ergonomic design for easy handling. Provides good chemical resistance. Autoclavable and withstands temperatures from -135°C to 135°C. Includes molded-in numbers and letters for easy identification of test tubes.

  • Test Tube Peg Racks

    Globe Scientific

    Fully autoclavable Manufactured from durable reinforced polypropylene (PP) Peg design allows easy viewing of tube contents Can be used to dry inverted tubes while minimizing collection of airborne contaminants Dimensions (L x W x H): 13mm: 179 x 127 x 64mm (7" x 5" x…

  • Full-View Test Tube Supports

    Bel-Art Products

    …draining test tubes. Stores test tubes upright, full or empty Holds inverted test tubes over pins for draining The rack with 102 pins, 5 x 16 rows (9259G50), is excellent for drying and storing glass plates used with vertical electrophoresis apparatus Steam autoclavable at 121°C…

  • Foam Test Tube Racks

    Jaece

    Foam racks for test tube storage and protection during shipping These economical, charcoal gray, open-cell foam racks have a capacity for 50 tubes in a wide range of sizes. Ideal for storage on benchtops, in incubators and refigerators/freezers. Racks will float for use in waterbaths. Can be…

  • Test Tube Slant Racks

    Thermo Scientific Nalgene

    …empty. After microwaving, set tubes filled with media at either 5° or 20° slant Media will harden with a consistent slant Higher specific gravity than water so stays submerged in a water bath; won't float Autoclavable (Note: Autoclaving will reduce strength over time)

  • SmoothRack Test Tube Racks

    FTR Enterprises

    The next generation test tube rack is here Holds 72 tubes Available in blue and white Made of autoclavable polypropylene Made in U.S.A. Dimensions: 9.5" x 5" x 2.6" Patent pending When using a SmoothRack a tube will never slip into an adjacent position,…

  • Switch-Grid™ Test Tube Racks

    Bel-Art Products

    …up to two different size tubes in the same rack and allows users to quickly switch grids to hold other sizes as needed. Each rack frame includes a set of grids in one size. Grid sets in alternate sizes can be purchased separately. 10mm to 30mm diameter test tubes fit in 5 colored coded grid…

  • Test Tube Drying Racks

    United Scientific Supplies

    …racks can conveniently hold inverted tubes for drying and minimize collection or airborne contaminants. Racks can also be used to hold and dry electrophoresis and chromatography plates. Autoclavable. The 96 place rack features an 8 x 12 array of pegs that hold test tubes up to 13mm in diameter.

  • Scienceware® Polypropylene Test Tube Basket

    Bel-Art Products

    Autoclavable Non-scratching Tapered sides permit nesting Baskets are ideal for applications such as sterilization, incubation and storage. Molded, one-piece design has a mesh opening of 9.5 mm.

  • Scienceware® No-Wire™ Test Tube Racks

    Bel-Art Products

    …to wire racks Stackable Available for 6 standard tube diameters Available in 3 colors Dimensions: 246mm x 104mm x 64mm high (9.7" x 4.1" x 2.5") Autoclavable at 121°C (250°F) Rugged racks are molded of autoclavable polypropylene. Footprint dimensions fit many different…

  • No-Wire Test Tube Grip Racks

    Bel-Art Products

    Test Tubes ‘Hang in There’ in Any Position, Even Inverted! Retainer fingers hold tubes firmly in the rack plates with no fear of dislodging, making them perfect for both decanting and water bath work. Special blend of autoclavable polypropylene plastic is heavier than water…

  • Poxygrid® "Half-Size" Test Tube Racks

    Bel-Art Products

    …green and blue for general lab use. Chemical and corrosion-resistant steel wire racks are coated with heat-cured epoxy Unaffected by organic solvents, salts, weak acids and weak alkalis Will withstand a temperature range of -223°C (-369°F) to 121°C (250°F); autoclavable

  • Poxygrid® 96-Place Test Tube Racks

    Bel-Art Products

    Maintain the 96-Place Format of High Throughput Applications with Large, 15mL Test Tube Capacity Ideal for mimicking the 96-place format used in microplates, deep-well plates and other tools configured for drug discovery and robotic applications. Flow-through design allows rapid…

  • Scienceware® Adjustable-Height Test Tube Rack

    Bel-Art Products

    1.5 to 15 mL tubes Holds six tubes or vials Compact footprint This height-adjustable rack securely holds up to six tubes or vials at any desired depth in a water bath or beaker. Rack features a flexible grip that easily retains mixed test tubes or varying weight and volume…

  • Scienceware® No-Wire™ Test Tube Half Racks

    Bel-Art Products

    Compact size polypropylene plastic racks save space in water baths, laminar flow hoods and fume hoods. Available in 5 grid sizes to accommodate the full range of laboratory test tubes Steam autoclavable at 121°C (250°F) Dimensions: 12.8 x 10.5 x 7.2cmH (5.1 x 4.1 x 2.8")

  • Unwire Polycarbonate Test Tube Racks

    Thermo Scientific Nalgene

    …temperatures Racks can be used in water baths, as they do not float Similar to 9259S10 series, but constructed of polycarbonate. Racks’ upper two shelves and handles are clear; the bottom shelf is opaque. Can be autoclaved occasionally, but repeated autoclaving is not recommended.

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.