Supplies, 9 x 9
-
M1 C30L Nonwoven Polyester/Cellulose Cleanroom Wiper
M1 (a Thomas Scientific Brand)Made with hydroentangled blend of 55% cellulose / 45% polyester; providing economical performance & purity. This creates a strong, clean, and very absorbant wipe for liquid removal or lint free wiping in controlled areas. This nonwoven wipe exhibits lower particle & fiber release than…
-
PROSAT® Sterile™ Polynit Heatseal Wipes are made of 100% knitted polyester that is laser cut to bond the fibers at the edges of the wipe. This creates a very clean nonabrasive edge that allows full utilization of the wipe surface. The wipe is chemical resistant and exceptionally low in…
-
SterileSorb™ Wipes
ContecSterileSorb™ SterileSorb™ sterile cellulose/polyester nonwoven wipes are made of strong and durable hydroentangled fabric. They are extremely absorbent with low levels of particles and extractables. Validated sterile to a Sterility Assurance Level of 10 -6 in accordance…
-
Amplitude™ Theta™ Wipes
ContecAmplitude™ EcoCloth™ This spunlaced wipe made of cellulose/polyester fabric features enhanced sorbency while being economical due to its light weight. Its sorbency exceeds comparable standard weight cellulose/polyester wipes. Ideal for wipe down of products prior to introduction…
-
Non-Woven 100% Cotton Cleanroom Wipers
FG Clean WipesThese wipes feature 100% pure, USA-grown cotton that is highly resistant to heat and compatible with a wide variety of solvents, solutions and cleaning chemicals. With extreme absorbency—up to six times the wipe weight—you can increase efficiency by using far less wipes. Recommended for…
-
FREE-SAT™ ULTIMATE 70™ Pre-Saturated Polyester Wipers
High Tech ConversionsSealed edges Cleanroom Class 10 (ISO Class 4) 100% Polyester Pre-saturated in 70% IPA/30% DI Water FREE-SAT ULTIMATE 70™ pre-saturated wipers are made of 100% polyester. These wipes have heat sealed edges. A laser beam cuts and melts each fiber along the edges, eliminating…
-
Saturix Knit Polyester Dry Sterile Cleanroom Wipes
FG Clean WipesRobust, pure polyester knit construction provides the cleanliness and durability for wide-rannging critical tasks, while our exacting sterilization process offer absolute confidence. •10-6 Sterility Assurance Level (SAL) • Laundered with reverse-osmosis DI water • Ultra-low…
-
Crew® Critical Task Wipers
Kimberly-Clark ProfessionalKimtech™ Pure W4 Critical Task Dry Wipers have a 100% polypropylene construction and are thermally bonded with no glues or binders. They are acid-, base- and solvent-resistant and feature straight, clean knife-cut edges to minimize lint. The wipers are double bagged with a case liner and are…
-
TekniClean ™ LX Polyester Knit Wipers Available in cleanliness levels for ISO 4 and higher cleanrooms with edge finishes suitable for a wide range of applications. TekniClean™ LX is made via an Ultra-Clean proprietary manufacturing process that reduces the potential for shedding…
-
SATPAX® 670 Sterile Wiper
BerkshireGamma irradiated and validated sterile to a Sterility Assurance Level of 10-6 in accordance with ANSI/AAMI/ISO guidelines. The wipers have a higher saturation level to support the critical solution contact time needed in the regulated industries. 55% cellulose / 45% polyester…
-
AlphaWipe is constructed from 100% continuous-filament polyester in a double-knit, no-run interlock pattern. Cleanroom laundered and packaged, AlphaWipe is an ultraclean and highly sorbent wiper ideal for critical environments. AlphaWipe has a laundered cut edge. It exhibits low particle and fiber…
-
TekniClean LX-ESD CARBON FIBER EMBEDDED KNIT POLYESTER WIPES The Ultra-Clean Solution for ESD Sensitive Environments TekniClean LX-ESD offers an Ultra-Clean solution for ESD sensitive environments where static control and purity are essential Available in cleanliness levels for ISO…
-
TX8410 AlphaSat with 100% IPA incorporates ITW Texwipe's ultraclean Vectra Alpha 10 sealed-border wipers pre-wetted with 100% semiconductor-grade isopropyl alcohol (IPA) in a red, easy-to-use reclosable slider bag. This product provides prewetted wipers on demand, thereby minimizing contamination…
-
TekniClean DX KNIT POLYESTER WIPES The Light-Duty Purity Solution The light weight solution for purity and economical wiping in controlled environments Available in cleanliness levels for ISO 4-8 cleanrooms with both laser-cut and standard edge finishes AccuSat pre-wetted with…
-
M1 Technology Sealed Border, Class 10 Polyester Knit Wipers
M1 (a Thomas Scientific Brand)M1 Technology Sealed Border, Class 10 Polyester Knit Wipers Basis Weight: (g/m2) 138 Weight Balance Thickness (mm) 0.50 Caliper Sorptive Capacity Intrinsic (mL/g) 2.88 IEST-RP-CC004.3-8.1 Extrinsic (mL/m2) 413 IEST-RP-CC004.3-8.1 Extractables (mg/g) DI Water, DIW…
-
TexWipe Wipers, 100% Cotton Twill
ITW TexwipeTexWipe is a strong, double-sided twill-pattern cotton wiper woven in a cross section of 118 x 60 threads per square inch. The product is manufactured with long staple cotton yarn to eliminate free-floating fibers on fabric surface. Features • 100% cotton • Bias cut and tight…
-
TechniCloth II wipers are fabricated from a hydroentangled, nonwoven blend of 55% cellulose and 45% polyester. This fabric blend combines the highly absorbent properties of a natural fiber with the cleanliness and strength of a synthetic wiper. TechniCloth II features ITW Texwipe's proprietary ULP…
-
PROSAT® Sterile™ PS-7030IR Wipes are made from a 100% nonwoven polyester fibers which are hydroentangled together using no binders or additives. The resulting fabric is extremely soft, clean and strong. The wipes are very low in particles, fibers, and extractables. PROSAT®…
-
PROSAT® Delta™ Wipes
ContecPROSAT® PS-Si Delta™ Wipes feature 100% nonwoven polyester presaturated with a blend of 10% isopropanol and 90% DI water. Designed for the semiconductor industry, the PROSAT PS-Si Delta Wipes provides the cleanest nonwoven wipe available. The durable wipe is made from 100% nonwoven…
-
Standard Weight Polyester Wipers
ValutekValutek’s light-weight polyester wiper is constructed from light-weight, 100% continuous filament polyester in a double-knit, no-run, interlock pattern with cold knife cut edges. This wiper is a clean and moderately absorbent wiper with low levels of particulate and extractable counts.…
-
CHOICE®900 Sealed Edge Knit 145 gram-9x9
Berkshire100% continuous filament knit polyester and ultrasonically sealed edge for reduced fiber contamination. Laundered and packaged in ISO Class 4 (Class 10) cleanroom. Critically low particles, fibers, ions and extractables High abrasion resistance Excellent absorbency Applications …
-
TekniCleanTM EX Quilted Polyester Wipers TekniClean EX o ers the perfect balance of clean and absorbency. This double-thick, quilted polyester wiper o ers layers of absorbent pockets to quickly and cleanly manage fluids in your critical environment APPLICATIONS Ideal for fluid and…
-
DURX® 770 Wipers
BerkshireDurx® 770 is ideal for critical small parts cleaning. It can be used for cleaning and maintenance in laboratories, aerospace, electronics, food processing, photo processing, and semiconductor, circuit board, pharmaceutical, and biomedical device manufacture. Durx® 770 is enhanced with…
-
Cobalt Blue Sterile Dry Wipes, ISO Class 5
High Tech ConversionsValidated Sterile Poly-Cellulose Blend ISO Class 5 (100) Cleanroom Wipe Cobalt Blue Sterile Cleanroom Wipes are validated sterile, durable, abrasion resistant, absorbent, and virtually free of particle generation. These dry sterile cleanroom wipes are comprised of a synergistic blend of…
-
Vectra® Quantum® 100 is made from 100% polyester with a sealed border, processed on Texwipe’s automated cleaning system. Vectra® sealed border technology advances the cleaning process and brings this technology to a higher level of wiper manufacturing, providing low…
-
M1 Technology MFSE Cleanroom Processed, Class 100 Microfiber Wipers
M1 (a Thomas Scientific Brand)M1 Technology Sealed Edge Woven Class 100 Microfiber Wipers Basis Weight: (g/m2) 110 Weight Balance Thickness (mm): 0.30 Caliper Sorptive Capacity Intrinsic (mL/g): 2.20 IEST-RP-CC004.3-8.1 Extrinsic (mL/m2) : 263 IEST-RP-CC004.3-8.1 Extractables (mg/g): DI…