Chemicals, Chambers
-
A BINDER material test chamber with mechanical convection of the FP series provides reliably short drying times and particularly fast heating – even for chambers under full loads. Benefits High temperature accuracy thanks to APT.line™ technology User-friendly controller…
-
Memmert Constant Climate Chamber (HPPeco) - this programmable model is the 115 volt, Peltier-technology seamlessly heats and cools, with TwinDISPLAY digital controller. HPPeco humidity range is 10 to 85% rh without light (upto 90% with light). Each individual appliance is tested according to the…
-
Benefits · Homogeneous climate conditions thanks to APT.line™ preheating chamber · Standard-compliant testing according to ICH Q1A · Precise temperature and humidity control Important characteristics · Temperature range: 0…
-
Temperature Test Chamber
Corepoint ScientificOne swing glass door, self-closing, right hinged, not reversible Three, 304 stainless steel sliding tray shelves Controller Information: Proportional integral derivative (PID) controller with graphic display Programmable ramp and soak Process phase graphic animations …
-
Sykes-Moore Chamber Only
Bellco GlassManufacture from brass. Studies cells by high magnification, phase optics or time lapse. Cover Slips are separated by a silicone gasket to maintain internal seal. Wrench assembly is required but sold separately. 2.83cm viewing area holds approximately 0.65 - 0.75mL. Specifications: Made from…
-
A BINDER MKF series environmental simulation chamber is ideally suited for any cold and heat testing based on current temperature and climate testing methods according to DIN and IEC standards. The comprehensive standard equipment for this environmental simulation chamber ensures ease of operation.…
-
The KBF is the specialist for unconditionally reliable stability testing and precise maintenance of constant climatic conditions. From programming to documentation, it meets all critical requirements. Temperature range: 0°C to 70°C Humidity range: 10% to 80% RH APT.line™…
-
Temperature calibration - Expansion – including certificate, each additional measuring point in center of chamber at specified test temperature
-
Temperature measurement 18 measuring points - including certificate, 18 measuring points at specified temperature - for ED, FD, FED, FP, M, FDL, MDL, MK, MKT, BD, BF, KB, BFD, BFED, C, CB, KBW Series
-
Temperature measurement 27 measuring points - including certificate, 27 measuring points at specified temperature - for ED, FE, FED, FP, M, FDL, MDL, MK, MKT, BD, BF, KB, BFD, BFED, C, CB, KBW Series
-
Organoid Counting Software
CorningBy purchasing the software extension, customers will be able to accumulate concentration in orgs./mL and collect surface area data in micrometers squared of their 3D cell cultures; a feat that existing standalone brightfield cell counters simply cannot offer. At launch, we are introducing 2…
-
Included are: drying train system for moisture reduction, programmable catalyst heater unit, ambidextrous Hypalon material gloves, touch screen controls, oxygen analyzer, transfer chamber, outlet strip 2-year warranty
-
The products in the Solid.Line impress with their tried-and-tested BINDER quality and reliability. They are suited to drying and heating. The attributes of the Solid.Line are geared towards the application in question and therefore used in research and quality assurance. Temperature range:…
-
Temperature measurement 9 measuring points - including certificate, 9 measuring points at specified temperature - for ED, FD, FED, FP, M, FDL, MDL, MK, MKT, BD, BF, KB, BFD, BFED, C, CB, KBW Series
-
The BINDER MKFT series environmental simulation chamber for low temperature alternating climate profiles is the specialist for dynamic alternating climate change between -70°C and 180°C. Large performance reserves and rapid cooling make the MKFT environmental simulation chamber the high-end…
-
SecureDry™ Evidence Drying Cabinet
Mystaire®SecureDry evidence drying cabinets are designed to provide a secure and dedicated area for drying wet evidentiary items while creating a barrier to keep out the potential threat of cross contamination. The cabinet utilizes pre-filtration, HEPA and carbon filtration to minimize the potential for…
-
Sykes-Moore Gasket, 2.5mm 2.5 mm Working Distance
Bellco GlassSykes Moore Gasket 2.5mm Specifications: Dimensions: 1" x 3/4" x 1/8" Working Distance: 2.5mm in the Sykes Moore Chamber Packed 6 per case
-
Sykes-Moore Gasket,1.5mm 1.5 mm Working Distance
Bellco GlassSykes Moore Gasket 1.5mm Specifications: Dimensions: 1" x 7/8" x 1 1/6" Working Distance: 1.5mm in the Sykes Moore Chamber
-
The BINDER MK series chamber is suitable for all heat and cold tests between -40°C and 180°C. The MK is a clever alternative to complex individual solutions for cyclical temperature tests. Temperature range: -40°C to 180°C APT.line™ preheating chamber technology …
-
The KBW series climate chamber with illumination achieves homogeneous light distribution and ensures consistent temperature conditions with its natural illumination. Temperature range: 0°C to 70°C Temperature range with light: 5°C to 60°C Positionable illumination…
-
Battery Test Chambers
BinderBattery Test Chambers with safety equipment for rapid temperature changes. Battery test chambers from BINDER are suitable for tests performed on lithium-ion cells and modules. The LIT MK series of temperature test chambers from BINDER provides a controllable temperature range of -40 °C to +110…
-
Humidity and Temperature Stability Chambers
Horizon IndustriesController Information: Proportional integral derivative (PID) controller with LCD display Programmable ramp and soak Process phase graphic animations USB data port RS-485 communication (MODBUS-RTU) Real time clock Battery backup Event logs: 100 Visual alarm…
-
-
-
VelO2x Rapid Oxygen Control Chamber
The Baker CompanyIdeal for Animal Research Models, the VelO2x system is designed to provide controlled and isolated environments. By mimicking the conditions experienced within a diseased state, VelO2x allows the researcher to better understand the impact that O2 levels have in conditions such as sleep apnea and…
-
Warranty extension from 2 to 3 years - The warranty is extended from 2 to 3 years from the delivery date, wear parts are excluded
-
The new BINDER Solid.Line KBF-S ECO Climate Chamber is a custom-made solution for long-term testing and accelerated stability testing for pharmaceutical products in accordance with the ICH Q1A guideline. The corrosion-free and condensation-free interior also ensures exceptionally stable temperature…
-
The products in the Solid.Line impress with their tried-and-tested BINDER quality and reliability. They are suited to drying and heating. The attributes of the Solid.Line are geared towards the application in question and therefore used in research and quality assurance. Temperature range:…
-
The new Solid.Line KBF-S climate chamber is a custom-made solution for long-term testing and accelerated stability testing for pharmaceutical products in accordance with the ICH Q1A guideline. The corrosion-free and condensation-free interior also ensures exceptionally stable temperature and…
-
CApture™ BT Fuming Chambers
LabconcoMicroprocessor control automates cyanoacrylate (CA) fuming of evidence Large 19 cubic foot chamber with 58.6" diagonal length - holds up to 15 long guns Programmable operating system for precise parameters and repeatable programs Fuming to 424° F with built-in humidifier and…
-
The BINDER KMF ensures absolutely constant test conditions throughout the testing area. A big advantage of this constant climate chamber is its low spacerequirement and flexibility in terms of water supply. The wide temperature and humidity range make this constant climate chamber ideally suited…
-
Temperature ranges between -70°C and 180°C, with the added benefit of natural simulation, are what make the BINDER MKT series so unique. At the same time, this environmental simulation chamber fulfills the very highest precision and performance requirements for cyclical temperature tests. …