Vapor Traps, Traps, Supplies
-
Vactrap™ G
Foxx Life SciencesFoxx Life Sciences’ Vactrap™ G (Glass) is the ultimate vacuum trap system, adhering to the strictest CDC recommendations for laboratory safety. With its new continuous full vacuum rating, it is ideal for protecting vacuum lines and users. Vactrap™ G safely contains waste produced during supernatant…
-
Vacuum Guage Trap
ChemglassTrap provides protection of vacuum gauges from particulates which contaminate the mercury when the gauge is vented to the atmosphere. Supplied packed with glass wool. Hose connections have a 9mm OD at the middle serration.
-
Dry Ice Condenser-Trap, with Ace-Threds
Ace GlassTwin chambered dry ice condenser-trap,for Rotary Evaporator use. Squatty design 18"high, two chambers. Dry ice fingers secured in main body via #50 Ace-Thred, bushings, and O-Rings allowing for easy cleaning. Two ports at top of chamber are 3/8" O.D. (for connecting to evaporator & vacuum source).…
-
-
Self washing, rotary evaporator trap design by Dr. William Boulanger. Superior design prevents blow-through and enables continuous addition with rotary evaporators. Solvent vapor rapidly flows out while condensed solvent continuously rinses both the trap walls and the evaporator shaft returning any…
-
Trap is designed for large volume solvent vapor removal during rotary evaporation. Trap is placed between the vacuum source and the rotary evaporator to prevent solvent vapors from entering the vacuum pump. PLASTIC COATED to contain solvent in case of breakage and supplied complete with a…
-
-
Trap, Rotary Evaporator, Anti-Splash
Ace GlassBump trap for use between the rotary evaporator's steam tube and evaporator flask, preventing fluid from being drawn into the condenser.
-
Dry Ice Trap
Ace GlassWith a 24/40 joint at the bottom. Inside diameter of coolant section is 50mm and length is approximately 250mm. O.D. of inlet and outlet is 22mm. Available modified with #15 Ace-Thred inlet/outlet for use with Ace-Safe tubing connectors.
-
Dry Ice Condenser / Trap, with Reservoir
Ace GlassTrap,dry ice condenser,glass hose connections,PTFE stopcock bottom.
-
Vacuum Traps, Threaded
Ace GlassRound bottom with adjustable inner tube and Nylon bushing with FETFE O-Ring. Optional threaded adapters (8746-75 and -78) will allow safe and easy tubing connect-disconnect. Simply attach tubing to serrated end of adapter, then connect adapter via 7506 bushing to inlet and outlet of trap. Serrated…
-
Inert Atmosphere System, Ace-Burlitch
Ace GlassThis system is designed for maximum convenience and versatility in the handling of air-sensitive compounds in conjunction with Ace no-air labware or suitably adapted conventional glassware. Complete instructions on assembly, leak testing and preparation of the system are included. Components can be…
-
Complete Vacuum Traps with 3/8" Hose Connections
SP Wilmad-LabGlassWidely used to protect vacuum pumps from contamination, these borosilicate glass vacuum traps are a one piece unit with two 3/8" hose connectors. Connectors are 180° apart to ease connection of heavy wall rubber tubing used in basic vacuum set-ups. These traps are frequently used with…
-
Adapter Valve No.15 O-Ring Joints
Ace GlassBorosilicate glass valve adapter with various Hi-Vac valve sizes and (2) No.15 O-Ring joints. Ideal for assembling Schlenk or vacuum lines Comes with (2) size -116 FETFE O-Rings.
-
Dean-Stark Moisture Traps
SP Wilmad-LabGlassCalibrated "to contain" at 20°C, these borosilicate glass moisture traps are used for the determination of water in various materials by distillation with an immiscible solvent. They consist of a full length Standard Taper inner joint for vapor tube connection to distilling flask and…
-
Vacuum Trap
Ace GlassUsed for freezing out undesired vapors in the vacuum system and also for use in conjunction with Dewar flasks.
-
SYNTHWARE Large Volume Vacuum Traps
Kemtech AmericaVacuum Trap, Large Volume Capacity: 500 and 1000mL available.
-
-
Bubbler Mineral Oil
DWK Life Sciences (Kimble)Used with mineral oil to observe gaseous addition to reactions. May be used to vent a reaction mixture to the atmosphere. Tubing connections are 8 mm O.D. and may be used with 179730-0808 or 179920-0808 to join multiple bubblers if necessary.
-
Adapter, Distilling Trap
Ace GlassDistilling trap adapter with outer joint top and inner joint bottom
-
Freezing Section, 29/42
labForce® (powered by Thomas Scientific)Prevents corrosion by acid and alkaline vapors, moisture, etc., entrained during evacuation of distilling apparatus, vacuum desiccators, etc. Freezing trap, when immersed in suitable freezing mixture, removes condensable vapors, gauge liquid or other foreign material accidentally introduced…
-
SYNTHWARE Two-Piece Vacuum Trap with #15 O-Ring Joint
Kemtech AmericaVacuum Trap, Two Piece Design Body Flange: 57mm O-ring Joint Size: #15 Outer Body OD: 50mm Outer Body Length: 300mm below flange supplied with flange O-ring and horseshoe clamp.
-
Vacuum Trap, O-Ring Flange Connection
Ace GlassVacuum trap assembly with o-ring flange connection. This design has flexibility and ease of assembly-disassembly for cleaning. Comes with Viton o-ring and stainless steel pinch clamp.
-
SYNTHWARE Vacuum Trap with #15 O-Ring Joint
Kemtech AmericaVacuum Trap Body Joint: 45/50 O-ring Joint Size: #15 Outer Body OD: 50mm Outer Body Length: 250mm below joint supplied with two size 116 Viton O-rings
-
Vacuum Trap
Ace GlassVacuum trap with joint to facilitate cleaning. Available modified with top tube bent in line with side tube, but in opposite direction.
-
PYREX® Replacement Trap
CorningThis specially designed PYREX® trap is a replacement part for the PYREX® Cyanide Distilling Apparatus (No. 3350-C) Used in testing for soluble and insoluble cyanides in water. Cyanide as hydrocyanic acid (HCN) is released from cyanide complexes by means of a reflux-distillation and absorbed in a…
-
Dewar Type PTFE Stopcock Vacuum Traps
ChemglassDewar style trap CONDENSERS designed for large volume solvent removal. Lower reservoir has a capacity of either 500 or 1000mL, with a 4mm PTFE stopcock. Serrated hose connections are 12mm at the smallest serration and 14mm at the largest serration. Optional UHMW Lid prevents evaporation of dry…
-
SYNTHWARE Dewar Type Vacuum Traps
Kemtech AmericaVacuum Trap, Dewar Type Capacity: 250, 500, and 1000mL available Stopcock: Glass or Teflon Options available Stopcock Bore: 4mm
-
SYNTHWARE Cylindrical Vacuum Traps
Kemtech AmericaVacuum Trap, Cylindrical Available in multiple sizes with various joint sizes, diameter, length, and inner/side tube size.
-
Adapter Vacuum ST 24/40
DWK Life Sciences (Kimble)Vertical adapter with vacuum take-off and drip tip.
-
Vacuum Traps, Threaded Body
Ace GlassConsists of Body with Ace-Thred, adjustable Inner Tube and Nylon Bushing with FETFE O-Ring. Available with optional threaded tubing adapters (-75,-78), or modified with #15 Ace-Threds on inlet/outlet for use with PTFE Ace-Safe connectors to allow safe easy tubing connect-disconnect. Simply attach…