Moisture Trap

Compare Tool

Select up to 3 products

Moisture Trap
1 - 32 of 84
Sort
View
Show
  • Economy Indicating Refillable Moisture Traps

    Agilent Technologies

    …Indicating Moisture Traps are designed to remove water, oil, and organics from gases employed in, but not limited to, gas chromatography. Refillable moisture traps are constructed from Lexan brand polycarbonate tubing. Lightweight, chemically resistant and of superior strength when compared to traps

  • Safe Glass Moisture Trap

    PerkinElmer

    …detectors that require high-purity gases. Recommended for ELCD and ECD systems in which moisture and contamination are a problem. Trap is shipped active and purged with nitrogen. It is recommended that you purge the trap with the gas you plan to use. Approximate dimensions: 13/8 in. W x 10 1/4 in. H…

  • Hydrocarbon/Moisture Traps

    Agilent Technologies

    Adsorbent refiles for hydrocarbon/moisture traps allow continued removal of extremely low levels of both moisture and hydrocarbons. Refill supplies material for two recharges for HMT trap.

  • High-Capacity Moisture Trap

    Restek

    Purged with ultra-high-purity helium; ready to use with any carrier gas including hydrogen Reduces water to less than 15 ppb Maximum operating pressure: 250 psi (1,724 kPa) Maximum flow: 1.25 L/min

  • Indicating Moisture Trap

    Restek

    Reduces water to less than 10 ppb; indicator changes from yellowish-green to blue at 5% relative humidity Prepurged for fast stabilization Reduces noise from high-sensitivity detectors Heavy-walled glass body prevents oxygen and water infusion 10 µm frit prevents microparticulate…

  • Moisture Trap

    Ace Glass

    For solvents heavier than water. Used in the method of quantitative separation and determination of glycol mixture by azeotropic distillation described in Analytical Chemistry, Vol. 29, No.1, Page 100. Capacity is 121/2mL, graduated in 0.1mL. Joints are standard taper 24/40.

  • Big Moisture Traps

    Agilent Technologies

    Ultra-high capacity for moisture Capacity 130 g H2O Pressure up to 250 psig Reduce H2O to ≤5 ppb 750 cc gas purifiers Refillable Suitable for bulk purification applications or where several instruments are plumbed from a single gas source.

  • Moisture Removal S-Traps

    Agilent Technologies

    Contains Molecular Sieve 5Å, 45/60 mesh Traps can be reconditioned by heating at a minimum of 350°C, with flow for 6 hours.

  • Click-On In-line Super Clean Ultra-High Capacity Moisture Trap

    Restek

    Click-On Traps measure: 8 1/2" x 1 1/4" (21.6 x 3.2cm) Note: Replacement trap only—fittings sold separately.

  • Glass Indicating Moisture Traps

    Agilent Technologies

    …band of Indicating Molecular Sieve 4Å Available in 70 cc, 100 cc and 250 cc sizes Heavy wall borosilicate glass tube — no moisture diffusion Refillable The 100 cc unit will treat 10 standard “A” cylinders with up to 30 ppm water or 16.3 grams to less than…

  • Molecular Sieve 13X and Indicating 4

    Agilent Technologies

    Available in three different sizes Mixed packing bed prevents improper installation Easily refillable Tested to 150 psi (helium) Both inlet and outlet connectors are equipped with stainless steel frits to prevent particulates from entering the gas stream. Indicating 4Å is…

  • Gas Management System

    Restek

    trap, your gas purification issues are handled in one central location. Removes moisture, hydrocarbons, and oxygen from carrier gas, extending column lifetime Produces high-purity carrier gas for most applications Includes one each: moisture, hydrocarbon, and indicating oxygen trap

  • Bidwell-Sterling Moisture Traps

    Wilmad-LabGlass - SP Scienceware

    Made of borosilicate glass, these Bidwell-Sterling moisture traps are calibrated "to contain" (TC) at 20°C and are used for determining moisture in samples by distilling with an immiscible liquid. Consist of vapor tube, return tube, round bottom graduated tube, and Standard Taper 24/40…

  • Dean-Stark Moisture Traps

    Wilmad-LabGlass - SP Scienceware

    Calibrated "to contain" at 20°C, these borosilicate glass moisture traps are used for the determination of water in various materials by distillation with an immiscible solvent. They consist of a full length Standard Taper inner joint for vapor tube connection to distilling flask and a…

  • Oxygen/Moisture Traps

    Agilent Technologies

    …polar phases. The Agilent OT3 Trap contains a highly active, metal-containing, scrubbing material in an inert, aluminum body. This material removes 500 mL oxygen from a gas stream to less than 15 ppb. Additionally, up to 2 grams of moisture can be removed by this trap without affecting the oxygen…

  • Distilling Receiver, Moisture Test, Merlic

    Chemglass

    Modified Dean-Stark trap allows for more efficient cooling and separation of the azeotrope during distillation. Graduated from 0 to 10ml in 0.2mL subdivisions. **Design suggested by Dr. Craig Merlic, University of California, Los Angeles, California

  • Oxygen Removal Traps

    Agilent Technologies

    …state to deep brown as saturation occurs. The Indicating Oxygen Trap (IOT) is designed for use in conjunction with high capacity, non-indicating oxygen traps. When properly installed downstream from the non-indicating trap, the IOT provides a visual indication of oxygen breakthrough before…

  • Air Pump

    Gast

    …Lpm) Stainless steel pump valves; aluminum cylinder and piston parts Equipped with safety pressure relief valve, intake filter and moisture trap, vacuum and pressure gauges, serrated tubing connector on inlet and outlet and carrying handle. Mounted on rubber suction feet. UL approved. …

  • Adapter, Moisture Trap

    Ace Glass

    Unique adapter used in place of a Dean & Stark Moisture Test Receiver. Simply add a condenser to top outer joint, any graduated funnel from 125mL to 2000mL to bottom inner joint, attach sample flask to inner side arm joint and you have a moisture test receiver.

  • Centrivap Cold Trap

    Labconco

    …Ultra-Low Cold Trap reaches -85°C in less than 30 minutes. Ready indicator illuminates when the collector coil reaches operating temperature of -40°C. Clear canister is attached to the left side of the cold trap and can hold various trap inserts. These trap inserts remove acids, moisture,

  • Bidwell-Sterling Moisture Traps with Vapor Connection

    Wilmad-LabGlass - SP Scienceware

    …these borosilicate glass Bidwell-Sterling moisture traps collect liquefied vapor. They feature a connection between top of vapor tube and graduated tube. This construction allows excess solvent to return to flask with minimal chance of condensed moisture return. Standard Taper 24/40 inner and outer…

  • Freezing Section, 29/42

    Thomas®

    Prevents corrosion by acid and alkaline vapors, moisture, etc., entrained during evacuation of distilling apparatus, vacuum desiccators, etc. Freezing trap, when immersed in suitable freezing mixture, removes condensable vapors, gauge liquid or other foreign material accidentally introduced…

  • Big Oxygen Traps

    Agilent Technologies

    Capacity: 3 liters O2 or 3,200 mg Pressure: Up to 250 psig Efficiency: reduction of O2 to less than 1 ppb 750 cubic centimeter gas purifiers Ideal for bulk purification applications or where several instruments are plumbed from a single gas source One piece of heavy-walled aluminum…

  • Adapter, Moisture Trap

    Ace Glass

    Unique adapter used in place of a Dean & Stark Moisture Test Receiver. Simply add a condenser to top standard taper outer joint, any graduated funnel from 125mL to 2000mL to bottom standard taper inner joint, attach sample flask to inner side arm joint and you have a moisture test receiver.

  • Moisture Stainless Steel Trap

    PerkinElmer

    Click-On Inline Super-Clean Traps are inline traps designed with Click-On adaptor connectors which allows inline cartridges to be exchanged without introducing oxygen. Spring loaded check valves seal when a filter is removed and open only when a new filter has been locked in. There is no need for…

  • Oxygen/Moisture Combination Stainless Steel Trap

    PerkinElmer

    Spring loaded check valves seal when a filter is removed and open only when a new filter has been locked in place. There is no need for loosening and tightening fittings every time a trap is changed and your system will not become contaminated during the process.

  • Moisture/Hydrocarbons Combination Stainless Steel Trap

    PerkinElmer

    Finish: Crimp Top Cap with Septa

  • Oxygen/Moisture/Hydrocarbons Triple Trap Stainless Steel Trap

    PerkinElmer

    I. D. : 11 mm

  • Triple Gas Specific (He): Oxygen/Moisture/Hydrocarbons Stainless Steel Trap

    PerkinElmer

    Click-On Inline Super-Clean Traps are inline traps designed with Click-On adaptor connectors which allows inline cartridges to be exchanged without introducing oxygen. Spring loaded check valves seal when a filter is removed and open only when a new filter has been locked in place. There is no need…

  • Indicating Glass Triple Trap, Oxygen/Moisture/Hydrocarbons: Helium specific.

    PerkinElmer

    The glass indicating trap clearly shows when the filter needs to be replaced with the use of color changes. The packing material is a silica-based environmentally friendly substitute for cobalt dioxide (blue) in the moisture indicator. Available as a kit with the necessary 1/8" brass connectors, and…

  • Triple: Oxygen/Moisture/Hydrocarbons Stainless Steel Trap with 1/8 Brass…

    PerkinElmer

    Click-On Inline Super-Clean Traps are inline traps designed with Click-On adaptor connectors which allows inline cartridges to be exchanged without introducing oxygen. Spring loaded check valves seal when a filter is removed and open only when a new filter has been locked in. There is no need for…

  • Oxygen/Moisture Combination Stainless Steel Trap with 1/8 Brass Connector (2)

    PerkinElmer

    Spring loaded check valves seal when a filter is removed and open only when a new filter has been locked in place. There is no need for loosening and tightening fittings every time a trap is changed and your system will not become contaminated during the process.

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.