Ace Glass Glass Joints & Adapters
-
Ace-Threds and Ace-Thred and joints
Ace GlassWith Ace-Threds or Ace-Thred and joints. Accepts a single 5mm or 10mm O.D. NMR Tube. Solvent reservoir capacity is 55mL. All threaded versions have a filter flask with a #15 Ace-Thred at top and O-Ring and #11 Ace-Thred side port with a removable Ace-Safe hose connection. Threaded-jointed version…
-
PTFE Sleeves, .38mm
Ace GlassDesigned for use with inner member regular joints with only a slight mismatch. Treated on inner surface so that it may be cemented to glass with ACE 7560 epoxy adhesive. Sleeves may also be used uncemented to replace lubricant at low pressure differentials. ACE PTFE sleeves are accurately shaped to…
-
Adapter, Vacuum Filtration
Ace GlassUsed for reduced pressure filtration with 7186 style, plain stem Buchner funnels. Top is tooled to accept a pluro stopper, bottom has a joint. Serrated hose connection has a second ring of 13.5mm O.D. Inserting the recommended size pluro stopper and th
-
Adapter, Septum Inlet, Two Ports
Ace GlassSampling adapter with joint at bottom and two septum at top for handling air-sensitive materials. Supplied with two septa.
-
Adapter, Liquid Inlet
Ace GlassWith 24/40 standard taper inner joint and vacuum take-off. Hose connection is size D.
-
Joints, Inner Member
Ace GlassStandard taper joint with reduced tube at both ends. Length of tube below joint is 100mm.
-
Solid, virgin PTFE, standard taper joint inserts for 6472 series flat glass heads. This low profile insert allows for increased working space above the head. The insert is secured to the head with a reverse threaded locking nut and sealed using a FETFE O-Ring. The top of the insert is formed to…
-
Adapter, Thermometer, PTFE
Ace GlassPTFE adapter with FETFE O-Ring for use with plain stem thermometers, gas inlet tubes, etc. O-Ring compression seal allows adjustable depth positioning. 10/18 size will accommodate tubes up to 6.5mm, all other sizes up to 7mm. All sizes have one internal O-ring size -108. Except for 10/18 size, all…
-
Adapter, Thermocouple
Ace GlassAce-Thred to standard taper adapter designed specifically for securing a thermocouple via a nylon bushing and PTFE ferrule.
-
Adapter, Splash Guard, Firestone
Ace GlassMedium length joints, top and bottom, that will accept full length joints. When inserted into flask, splash guard combines with flask neck to give best protection against pot splash up. Overall height is kept to a minimum to effect best distillation.
-
Distilling Column, Snyder
Ace GlassFloating ball type, 24/40 joints, each section is approximatly 51mm long.
-
Distilling Apparatus, High Boiling
Ace GlassUseful for separating higher boiling liquids that require a short pot-to-column distance to prevent excessive condensation. If pot bleed is desired a two-neck flask can be used. Thermometer joint is 10/18 for 9551, 25mm immersion.
-
Filter Reactor, Plain
Ace GlassComplete filter reactor assembly allows single or multi-step reactions and filtrations in the same vessel. Features heavy wall glass, interchangeable filters, mechanical agitation and 4" or 6" Duran flanges. Available capacities from 150ml to 6000ml. P
-
Coupling, Reducing, Nylon or PTFE
Ace GlassNylon or PTFE reducing coupling for threaded columns or fittings. Single o-ring seal for leak tight engagement with hand pressure.
-
Adapter, Socket Joint to Tube
Ace GlassAdapter, socket joint to tubing, sized for compression fittings.
-
Distillation Apparatus, Short Path
Ace GlassDesigned for small quantities where holdup between flask and receiver must be minimized, but where it is also desired to measure vapor temperature with the accuracy of larger setups. Still body is available with or without vacuum jacket and with vigreu
-
Clamps, Spherical joint, Union type
Ace GlassU.S. patent #2,388,633 fabricated from aluminum. This type clamp affords a positive, uniform clamping pressure.
-
Adapter, PTFE Pour Spout
Ace GlassPTFE threaded pour spout with fetfe o-ring prevents material contact with the threads.
-
Joints, Ball Member, Spherical
Ace GlassFor use with PTFE sleeves; ground slightly undersize so that with 7556 sleeves in place, joint conforms to standard dimensions.
-
Tubes, Connecting, Rotary Evaporator
Ace GlassBorosilicate glass connecting tubes for Model R220 rotary evaporator. These components match various connecting tubes for all the rotary evaporator glass sets. The tubes are used in the upper glass assemblies to connect the various condensers and expansion tanks.
-
Adapter, pH Probe Tube, Pilot Plant
Ace GlasspH probe adapter tube extends the probe deep within large capacity flasks. Fits in 45/50 opening on head and is vertically adjustable along its length. Available with either Chemraz or Fetfe o-rings and in 24 in(61cm), 36 in (91cm), or 48 in (122cm) le
-
Gas Reservoir
Ace GlassGas collecting reservoir, described in Microscale Organic Laboratory, Mayo, Pike, Butcher, as a means of collecting and sampling gaseous products when using 9586 Capillary Gas Delivery Tube. Open-bottom tube has single line graduation at 3 and 4mL level and 20-400 thread at top. Supplied with cap…
-
Distillation Apparatus
Ace GlassWith 10/30 joint for a 25 mm immersion thermometer. All other joints are 14/20. Hose connections project to rear. Round-bottom and pear-shape flasks supplied with complete unit are 25mL capacity. Hose connections on still are size A.
-
Hose Connections, Direct Seal
Ace GlassFour ring connector, (code -03 has three rings), is tooled with flare and exposed for direct sealing to apparatus. Tooled on each end of tubing with approximately 5-6" between connectors. Priced per dozen connectors (i.e., six doubles).
-
Jacketed glass immersion well for use with our 7825 series lamps within our 6962,7863,7864,7865 & 7891 series reactors. Codes -30 & -40 feature a small diameter glass inner feed tube to ensure the flow of coolant from the bottom of the well up to the outlet. Codes -35 & -45 feature a PTFE inner…
-
Glass standard taper and spherical joint adapters featuring a vertical ground glass sidearm. The sidearm is used to make tube compression fitting connection to a wide variety of flexible and rigid tubing using our 12709,12711,12715 & 12716 product families of fittings.
-
Vapor Duct Tube, For Rotary Evaporators
Ace GlassReplacement vapor duct tube for Buchi rotary evaporators. The 45mm length fits V assemblies and the 160mm length fits A assemblies. End joints are available in [ST] 29/32, [ST] 24/40, or [ST] 29/42 inner. The middle joint is tooled to fit the specific rotary evaporator for which it was designed.…
-
Joints, Outer Member, Straight-Sided
Ace GlassO.D. of standard taper joint and tube are approximately same size, allowing for ease in clamping.
-
With the joint at bottom, either a #7, #11, #15 Ace-Thred at top and serrated hose connection.
-
Mineral Oil Bubbler
Ace GlassUsed to make a vent to the atmosphere. May also be used with mercury when adequate ventilation is available. Reservoir head prevents oil from being sucked back into the system. With 8mm O.D. tubing connections. Volume approximately 40mL below side arm.
-
Joints, Outer Member, Straight-Through
Ace GlassTubing is same diameter as reinforcing rings on the standard taper joint. The rings permit penetration by the clamp cushioning material, and permit firm support without the need for excessive pressure on the joint; also, strain on the joint is reduced from expansion due to temperature increase.…
-
Adapters, Joints
Ace GlassA general line of adapters supplied with inner joints to be used in assemblies for distillation, extraction or your own requirements. On codes -14 and -22, please specify capacity and catalog number of item into which the adapter is to be placed. We wi