Wipers, Pouch, Supplies
-
PROSAT® Sterile™ Polynit Heatseal LE Wipes are made of 100% knitted polyester Polynit Heatseal, presaturated with a blend of 70% isopropanol and 30% water for injection (WFI). Each lot is tested before release and low endotoxin certified to less than <1EU/wipe. The sealed edge…
-
TekniMaxTM DX Nonwoven Microfiber Designed for frequent use on transparent or sensitive surfaces, TekniMax™ DX restores cleanliness by removing haze, fine particles, or oily residue build-up in a single swipe APPLICATIONS Optics & Sensor Cleaning Polishing Surfaces…
-
SilSat™ Silicone Wipes
Micronova ManufacturingMicronova™ SilSat™ Wipe is a polyester wipe impregnated with a blend of medical grade silicone and IPA. Will lubricate gaskets and seals in isolators, refrigerators and cabinets in aseptic processing and support areas. Packaged 8 wipes to a pouch. Irradiated.
-
Contec's PROSAT ® Sterile ™ Polypropylene wipes are presaturated with 70% USP grade isopropanol and 30% deionized water. The meltblown polypropylene wipes provide a consistent release of solvent to thoroughly remove surface contaminants in critical environments. The PROSAT…
-
MiraSAT™ 70/30 Wipers
Foamtec InternationalMiraSAT™ 70/30 is pre-saturated with 70% Semiconductor Grade IPA & 30% Ultrapure Water(UPW) & incorporates Foamtec’s industry-leading MiraWIPE™ Microfiber sealed edge wiper. The unique woven microfiber wiper wetted with only 7.2mL of fluid enables scrubbing like cleaning…
-
9" x 9" 70% IPA Presat Polypropylene Pouches
FG Clean WipesValidated sterile for the most exacting standards, these wipes feature extremely soft polypropylene and pure IPA for wiping delicate, scratch-sensitive surfaces. With high resistance to acids and many chemicals, these wipes are excellent for removing residues from surfaces and general wet wiping.…
-
PolySat incorporates soft, 100% melt-blown polypropylene substrate pre-wetted with a 0.2 µm filtered, 70% isopropyl alcohol/30% deionized water solution. Packaged in a reclosable slider bag, PolySat is convenient for cleaning sensitive surfaces in controlled environments.
-
PHARMA-SAT PLUS™ 70% IPA Sterile Polyester/Cellulose Wipers
Acute Care PharmaceuticalsPharma-Sat Plus™ wipers are low endotoxin, ISO Class 5, non-woven, 45% polyester / 55% cellulose blended wipers that are sterile. Our economical, non-shedding, pre-saturated wipers can be used throughout your cleanroom for cleaning, disinfecting, spill control and wipe down of products.…
-
PROSAT® Sterile™ Polywipe-C Heatseal Wipes are made from a standardweight 100% knitted polyester that is laser cut to bond the fibers at the edges of the wipe. The wipe is chemical resistant and exceptionally low in particles and extractable residue making it ideal for critical cleaning.…
-
Contec’s PROSAT® Sterile™ Polypropylene Low Endotoxin wipes are presaturated with 70% USP grade isopropanol and 30% deionized water. The meltblown polypropylene wipes provide a consistent release of solvent to thoroughly remove surface contaminants in critical environments. …
-
TechniCloth wipers pre-wetted with 70% isopropyl alcohol and sterilized Sterile TechniSat is constructed from a hydroentangled polyester/cellulose blend that is pre-wetted with 70% isopropyl alcohol and packaged in a resealable flexpack. Each package is gamma irradiated to 10‰ÛÒ6 Sterility…
-
Contec's PROSAT® Sterile™ Polypropylene wipes are presaturated with 70% denatured ethanol and 30% deionized water. The meltblown polypropylene wipes provide a consistent release of solvent to thoroughly remove surface contaminants in critical environments. The PROSAT®…
-
TekniClean ™ LX Polyester Knit Wipers Available in cleanliness levels for ISO 4 and higher cleanrooms with edge finishes suitable for a wide range of applications. TekniClean™ LX is made via an Ultra-Clean proprietary manufacturing process that reduces the potential for shedding…
-
TekniCleanTM LX Polyester Knit Wipers Available in cleanliness levels for ISO 3 and higher cleanrooms with edge finishes suitable for a wide range of applications, Teknipure™ LX is made via an Ultra-Clean proprietary manufacturing process that reduces the potential for shedding while e…
-
Decon Clean Wipes, sterile
Veltek AssociatesResidue remover and cleaner RTU wipe, 12×12 DECON-CLEAN saturated wipes are designed to remove residue left behind from disinfecting agents. Use for aseptic and non-aseptic wipe downs of filling and packaging machinery, stainless steel, Lexan, polycarbonate, glass, and any critical…
-
PolySat incorporates soft, 100% melt-blown polypropylene substrate pre-wetted with a 0.2 ë_m filtered, 70% isopropyl alcohol/30% deionized water solution. Packaged in resealable flexpacks or flip-top tubs, PolySat is convenient for cleaning sensitive surfaces in controlled environments. …
-
Sterile TechniSat Presaturated Wipers, 9x11
ITW TexwipeTechniCloth wipers pre-wetted with 70% isopropyl alcohol and sterilized Sterile TechniSat is constructed from a hydroentangled polyester/cellulose blend that is pre-wetted with 70% isopropyl alcohol and packaged in a resealable flexpack. Each package is gamma irradiated to 10‰ÛÒ6 Sterility…
-
HYPO-CHLOR Wipes
Veltek AssociatesHYPO-CHLOR® Wipes are superior saturated sodium hypochlorite wipes used for both aseptic and non-aseptic wipe downs of filling and packaging machinery, surfaces, lexan, polycarbonate, glass, and any critical surfaces that require cleaning. The unique and patented Asepti-Fill system assures…
-
STERI-PEROX 6% Prewetted Wipes, Sterile , 12" x 12"
Veltek AssociatesThe STERI-PEROX Wipe is a superior saturated Hydrogen Peroxide wipe used for both aseptic and non-aseptic wipe downs of filling and packaging machinery, stainless steel surfaces, lexan, polycarbonate, glass, and any critical surfaces that require cleaning. The unique and patented Asepti-Fill system…
-
Extremely soft polypropylene and pure IPA bring wet wiping to delicate, scratch-sensitive surfaces. With high resistance to acids and many chemicals, these wipes are excellent for removing residues from surfaces and general wet wiping. Recommended for ISO 5-8 critical environments. Features …
-
With the benefits of a critically clean nonwoven and the all-purpose concentration of 70% IPA, these wipes are versatile and dependable. Packaged in a convenient resealable pouch, a range of wet wiping tasks become more cost effective and efficient. Recommended for ISO 5-8 controlled environments. …
-
-
TekniZorbTM LXS Meltblown Polypropylene TekniZorbTM LXS o ers a very low-shedding wiping solution to deposit IPA while e ectively removing residue from the surface in your controlled environment. APPLICATIONS Ideal for e cient surface cleaning and sanitization between and during…
-
PROSAT Quiltec® I Wipes
ContecPROSAT®, Quiltec® I wipes, presaturated with 70% IPA/30% DI Water, 12" x 12" (30 x 30cm), sterile Contec, Inc. products are intended for sale/shipment within North America only. International customers should contact their local Contec, Inc. distributor to place orders for…
-
Hypo-Chlor 0.25% Wipe, Sterile
Veltek AssociatesSterile Hypo-Chlor 0.25% Saturated Wipe, residue remover and decontamination wipe. Provide adequate ventilation. Avoid inhalation of vapors/mist and contact with skin and eyes. Wear appropriate personal protective equipment. Handle and open container with care. Change contaminated clothing. Wash…
-
These wipes feature a high concentration of IPA with pure polyester for tough wet wiping in the field. The ultra-low linting substrate resists abrasion and 96% IPA cuts through grease, dirt and other contaminants—perfect for pipeline, gas and other demanding…
-
TekniZorb ™ LXS Meltblown Polypropylene TekniZorbTM LXS offers a very low-shedding wiping solution to deposit IPA while effectively removing residue from the surface in your controlled environment. APPLICATIONS Ideal for efficient surface cleaning and sanitization between…