Glass Tubing, Tubing, Supplies
-
NMR Tube Carrier
SP Wilmad-LabGlassTry our handy pocket NMR/EPR tube carrier; holds one 5mm O.D., 7 inch length NMR/EPR tube. Pack of 3 white holders. Features a pocket clip that keeps it secure. Made from unbreakable polymer material with a snap-on cap. Protection is provided for the sample and lab personnel during transport.
-
This PYREX® solvent recovery head allows for condensation and collection of solvents while performing concentrations with a Kuderna-Danish concentrator. 96-99% solvent recovery allows for concentrations to be done outside the hood. Unique, simple design allows use with existing condensers and flasks.
-
Pyrex® MAS Rotor Inserts
SP Wilmad-LabGlassDesigned for air-sensitive samples and semi-solid samples such as gels or highly viscous liquids, Pyrex® MAS Rotor Inserts allow samples to be sealed into an NMR rotor by heat-seal or epoxy. Note: A glove box may be required for sealing of air-sensitive samples.
-
Adapter, Feed Tube, Septum
Ace GlassThreaded both ends and with additional #7 threaded side opening for introduction of samples by hypodermic syringe. #7 thread at top is supplied with 5029 Nylon bushing and Fetfe O-ring for use with 5831, 5832 adjustable feed tubes. Size listed is Ace-thred designation which refers to I.D. of tubing…
-
X-Band Precision Brand EPR Quartz Tubes
SP Wilmad-LabGlassWilmad X-Band Precision Brand EPR Quartz tubes are manufactured from naturally occurring quartz with the highest purity to minimize the background signal. Hold 10 to 15 times better tolerances on the inner diameter and 5 times smaller camber and concentricity vs economy brand tubes Ideal…
-
5mm O.D. Thin Walled Quartz NMR Tubes
SP Wilmad-LabGlassWilmad Precision NMR Quartz Tubes have an extremely low thermal expansion rate and high tensile strength which is 14 times more robust during the cooling/heating process than Type 1 Class A glass tubes. Naturally occurring quartz maintains an over 85% transmission rate (10 mm thickness,…
-
SYNTHWARE NMR Tube Washer
Kemtech AmericaWith 24/40 inner joint and 10mm hose connection. For 5mm NMR tube only. The NMR tube is inserted into the tube cleaner with its plastic cap placed on the closed end to provide support and a vacuum seal. The washing solvent is sequentially added through the side tube while a vacuum is applied…
-
3mm O.D. Thin Walled Precision NMR Tubes
SP Wilmad-LabGlassTo maximize SNR, Precision NMR Tubes have minimal paramagnetic impurities that would impact shimming. Tight ID and OD tolerance as small as 0.0065mm accommodates Wilmad inserts. Manufactured in a state-of-the-art ISO 9001:2008 USA facility using a unique precision shrinking and grinding…
-
5mm Micro Cell Assembly
SP Wilmad-LabGlassSample volume can be as little as 18µL 3 different inserts with various shapes (Spherical Bulb, Capillary Tube and Cylindrical Bulb) Outer tube (Precision Thin Walled) must be ordered separately depending on magnetic field strength Not recommended for variable temperature experiments…
-
Rotor and Caps for Bruker® MAS Probe
SP Wilmad-LabGlassManufactured from the highest purity Zirconia, Wilmad MAS Rotors provide the ultimate solution for analysis of solid samples. Caps fitted with O-rings for improved sealing MAS Probe and caps are 100% compatible for most solid state NMR spectrometers Thoroughly inspected before and…
-
Process pipe padded hanger with mounting foot.
-
COLUMN CHROM FRTD 22X300MM
SP Wilmad-LabGlassInside Height 22.0 millimeters Item Weight 1.10 pounds Length 25 millimeters Width 25 millimeters Material Borosilicate Glass
-
5mm O.D. Heavy Walled Precision NMR Tubes
SP Wilmad-LabGlassTo maximize SNR, Precision NMR Tubes have minimal paramagnetic impurities that would impact shimming. Tight ID and OD tolerance as small as 0.0065mm accommodates Wilmad inserts. Manufactured in a state-of-the-art ISO 9001:2008 USA facility using a unique precision shrinking and grinding…
-
Pyrex® NMR Capillary Tubes
SP Wilmad-LabGlassWilmad’s WG-1364 series capillary tubes are sealed at one end and provide a low cost solution for small volume NMR measurement. Made of ASTM Type 1 Class A glass Tested at 400 MHz field
-
Bubbler, No-Air
Ace GlassBubbler with metering valve for precise control of inert gas introduction and features 9mm OD tube-end side arms for use with 3/8in ID vacuum tubing.
-
Reaction Monitoring System
SP Wilmad-LabGlassDesigned to monitor reactions from start to finish, the Wilmad-LabGlass Reaction Monitoring System is a two-chamber borosilicate glass NMR tube that allows for in-tube mixing. The system features an inner chamber with a Teflon® tip that when secured creates a positive seal separating solutions…
-
5mm O.D. Ultra-Thin Walled Precision NMR Tubes
SP Wilmad-LabGlassTo maximize SNR, Precision NMR Tubes have minimal paramagnetic impurities that would impact shimming. Tight ID and OD tolerance as small as 0.0065mm accommodates Wilmad inserts. Manufactured in a state-of-the-art ISO 9001:2008 USA facility using a unique precision shrinking and grinding…
-
Medium Tubing 1.75" X 0.09" X 48.25"
DWK Life Sciences (Kimble)33 expansion borosilicate glass tubing with cut ends. Medium wall precision bore tubing Tubing has a low coefficient of expansion and a high resistance to chemical attack Conforming to USP Type I and ASTM E438, Type I, Class A requirements
-
Truebore, Precision Glass Tubing
Ace GlassInside diameter tolerance of 0.0004", Trubore, a trademark of Ace Glass Incorporated, stands for precision bore tubing of the highest quality, maintained by production techniques, careful selection of raw materials, and step-by-step quality control. Trubore tubing is used in ACE items such as our…
-
Feed Tube, Luer Tip
Ace GlassPermits packing of column without excessive drop impact. Also used for side arm introduction of effluent or may be used for pressurized operation. Used in conjunction with 5029 Nylon bushing. Supplied straight only. Tube is 8 mm O.D. with luer connection.
-
Pressure Vacuum Valve NMR Tubes
SP Wilmad-LabGlassWilmad’s Pressure Vacuum Tube is the most reliable NMR tube on the market for medium range pressure (<300 psi) and ultra vacuum (10-8 torr) experiments. Connect to a 1/8" metal (SST or brass) vacuum line using Swagelok® fittings Pressure vacuum valve is made of PTFE,…
-
-
Coaxial Inserts
SP Wilmad-LabGlassSwitch between three unique sample ratios during external referencing experiments Ideal for variable temperature experiments as materials is the same between the tubes and spacer In the complete set the insert and outer tube are fused together at the bottom. It is recommended for high field…
-
5mm O.D. Medium Walled Precision NMR Tubes
SP Wilmad-LabGlassTo maximize SNR, Precision NMR Tubes have minimal paramagnetic impurities that would impact shimming. Tight ID and OD tolerance as small as 0.0065mm accommodates Wilmad inserts. Manufactured in a state-of-the-art ISO 9001:2008 USA facility using a unique precision shrinking and grinding…
-
10mm O.D. Economy NMR Tubes
SP Wilmad-LabGlassWilmad-LabGlass 10 mm Economy NMR Tubes are manufactured from borosilicate glass that meets the ASTM Type 1 Class B standard and recognized as N51A. Due to its nature, this glass has much less thermal-shock resistance than Class A glass used for our Precision Tubes. It may contain Fe2O3 which is…
-
3mm Economy NMR Tubes
SP Wilmad-LabGlassWith the steady increase of SNR on modern NMR spectrometers, the trend of small volume testing fits in high-throughput NMR to save on solvent costs. Wilmad-LabGlass presents a 3mm OD Economy Sample Tube with the same outstanding quality and performance as our legendary 5mm line. The new 4"…
-
5mm O.D. Quick Pressure Valve (QPV) NMR Sample Tubes
SP Wilmad-LabGlassWilmad Quick Pressure Valve Sample Tubes are specially designed to simplify the work of NMR/EPR studies for catalysis, gas-liquid phase reactions, air sensitive samples and elevated temperature studies using low boiling point solvents. Due to the nature of glass, Extreme Caution should be…
-
Disposable NMR/EPR Tube Caps
SP Wilmad-LabGlassDisposable NMR Tube Caps are manufactured from molded PVC or Polyethylene depending on the tube OD. The different colors help track samples based on various reference solvents. When using Chloroform or Acetone as reference solution, please avoid (1) direct contact between the sample and the…
-
These Capillary Gas Delivery Tubes are replacement parts for the 6949M series of PYREX® microchemistry kits.
-
Susceptibility Matched Shigemi® Tubes
SP Wilmad-LabGlassShigemi tube features a susceptbility matched bottom and plunger for each of the following solvents: CDCL3 CD3OD D2O DMSO-d6 This feature would effectively reduce the boundary gradients at the edges of the coil. Therefore, it is no longer critical to keep the general NMR sample…
-
Feed Tube, Hose Connection
Ace GlassPermits packing of column without excessive drop impact. Also used for side arm introduction of effluent or may be used for pressurized operation. Used in conjunction with 5029 Nylon bushing. Supplied straight or bent. Hose conn. are size C. Tube is 8 mm O.D.
-
15mm O.D. Heavy Walled Precision NMR Tubes
SP Wilmad-LabGlassTo maximize SNR, Precision NMR Tubes have minimal paramagnetic impurities that would impact shimming. Tight ID and OD tolerance as small as 0.0065mm accommodates Wilmad inserts. Manufactured in a state-of-the-art ISO 9001:2008 USA facility using a unique precision shrinking and grinding…