Sample Preparation, Chromatography

Compare Tool

Select up to 3 products

HomeAll Products

Restek Sample Preparation, Chromatography

1 - 32 of 120
Sort
View
Show
  • Oil-free vacuum pumps are piston powered, so they do not pollute the air and require minimal maintenance Quiet, low-vibration units keep disturbances to a minimum Built-in thermal protector automatically shuts off pump if it overheats and then restarts it once the unit is cool Inlet filter…

  • Sampling bags are a low-cost whole air sampling device for high level VOCs and permanent gases. Several EPA, NIOSH, and OSHA methods exist for bag sampling for a variety of applications: stationary sources emissions; workplace atmospheres; ambient, indoor air quality; and breath analysis. Choose…

  • Swagelok sample cylinders are made of 304L and 316L stainless steel to resist corrosion and DOT rated to 1,800 and 5,000 psig (TPED cylinders rated to 1,450 and 4,350 psig), which allows sampling at gas wellheads as well as on-site refineries. Each cylinder is hydrostatically tested to at least 5/3…

  • Accurately and precisely dispense liquids for QuEChERS extractions with this versatile pump. A quick, simple adjustment lets you set the output volume anywhere from 2.5 mL to 30 mL per stroke, and the included adaptors will accommodate most reagent bottles. Adjustment knob offers 56 output…

  • Use the Resprep sample delivery system to transfer large volumes of low viscosity samples directly from a bottle to a solid phase extraction cartridge, or to a disk on a vacuum manifold system for extraction or cleanup. Each unit consists of six transfer lines with a stainless steel weight on one…

  • Restek’s air canister tripod holds two canisters simultaneously for collocated ambient air sampling. The custom-designed bracket holds most 1, 3, and 6L canisters* securely without any tools. Lightweight (12 lb) and compact for easy storage and transport Extends from 6' to 9'…

  • Polypropylene protein precipitation (PPT) 96-well plates offer highly efficient >99% protein removal Minimum 24-hour drip-free feature for easy in-well protein precipitation—no fear of backflushing or contamination Built-in dual-layer membrane with different porosities in each layer…

  • Feature patented diffusion-locking technology at either end of the sorbent bed to prevent diffusive ingress of atmospheric contaminants outside the pumped sampling period Significantly reduce the risk of contamination from poorly fitted or loose caps Prevent necking and other damage to the…

  • These cartridges have been specifically designed to provide consistent and reproducible results for the method or application stated. All cartridges are manufactured using high density polypropylene and have polyethylene frits unless otherwise noted. Cartridges may be processed by any one or…

  • Great value and improved design Eliminates the need for the adaptor fitting on the static and purge valves

  • New personal air sampling technology designed to meet OSHA and NIOSH requirements for industrial hygiene applications Quiet, robust sampler does not require a pump and manages variations in face velocity, temperature, and humidity better than traditional sampling approaches Easy to…

  • High-accuracy test gauges are recommended for verifying the vacuum/pressure in canisters before and after sampling. The 6-inch face on the analog gauge allows for easy reading. The digital gauge operates on two AAA batteries and offers an unambiguous readout. Both gauges have an accuracy of +/–…

  • Use a luer lock valve adaptor to connect a luer lock fitting to a Rheodyne or Valco valve.

  • This 316 stainless steel filter is designed to collect particles larger than 7 microns. We offer Siltek-treated and stainless steel versions (1/4" compression fitting on both ends). Note: frit is not replaceable.

  • 1/16" fittings, 1mm ID, for "W Type" valves Ideal for samples containing low concentrations of sulfur or other active compounds Sample loop sizes from 5 µL to 5 mL Sulfinert treatment eliminates active sites in the valve or loop for better recovery of active compounds.

  • Sampling bags are a low-cost whole air sampling device for high level VOCs and permanent gases. Several EPA, NIOSH, and OSHA methods exist for bag sampling for a variety of applications: stationary sources emissions; workplace atmospheres; ambient, indoor air quality; and breath analysis. Choose…

  • 47 mm glass fiber disks embedded with specialty bonded silica Meet requirements for EPA Method 1664.* Reduce emulsion formation and amount of solvent required by previous EPA methods No chlorofluorocarbons needed *A sodium sulfate drying tube (cat.# 26207) and a 0.45 µm PTFE…

  • High-quality thermal desorption tubes are suitable for ppt to ppm concentrations of volatile organic compounds (VOCs) in ambient, indoor, personal, and industrial hygiene environments. Fit Markes (ULTRA and UNITY), PerkinElmer, and Shimadzu thermal desorbers. Packed tubes come with a report…

  • Swagelok sample cylinders are made of 304L and 316L stainless steel to resist corrosion and DOT rated to 1,800 and 5,000 psig (TPED cylinders rated to 1,450 and 4,350 psig), which allows sampling at gas wellheads as well as on-site refineries. Each cylinder is hydrostatically tested to at least 5/3…

  • PTFE wetted parts are highly resistant to corrosive gases Diaphragm-based pump is low maintenance and virtually pollution free Quiet, low-vibration units keep disturbances to a minimum Built-in thermal protector automatically shuts off pump if it overheats and then restarts it once the…

  • Restek’s passive air sampling kit incorporates all the hardware necessary to collect air samples and is easy to assemble for field sampling.* Kit includes flow controller, critical orifice, 2 µm frit filter, vacuum gauge, and sample inlet. The gauge and sample inlet are downsized for…

  • Hydrophilic (polar) adsorbents used to extract hydrophilic analytes from nonpolar matrices, such as organic solvents (e.g., polar contaminants from sample extracts). All cartridges are manufactured using high density polypropylene and have polyethylene frits unless otherwise noted. …

  • Single-stage, stainless steel Two pressure gauges and CGA-180 fitting Stainless steel diaphragm and Kel-F seat Accurate pressure control even at low flow rates Individually tested for leaks and impurities

  • Glass fiber disks embedded with C18 or C8 bonded silica Extract semivolatile organic compounds Deep-pore design reduces clogging and allows faster flow rates Meet requirements for EPA Methods 525.1, 506, 550.1, and 549.1 Lower cost than PTFE disks

  • Florisil PR is commonly used to remove polar interferences from pesticide residues. This bulk material is ideal for labs packing their own extraction cartridges for pesticide residue extractions. Pesticide residue grade Packaged in glass containers

  • Allows sequential sampling of up to 32 thermal desorption tubes (3.5" each) Worry-free, independent operation lets you get more done—simply set up the unit in the field for extended sampling, then retrieve it at the end of the sampling period Reliably collect accurate samples;…

  • Alta-Robbins' unique valve design incorporates a fully contained soft seat that provides durability and longer lifetime. Tight shut-off is easily achieved with very low torque, yet the valve is rugged enough to withstand overtightening. Multiple valve configurations are available for both…

  • For ultimate inertness, SilcoCan air sampling canisters feature our unique Siltek treatment technology. Even highly active components, at low parts-per-billion concentrations, can be readily sampled and stored without loss. The RAVE valve is a high-quality, metal-to-metal seal, 2/3-turn valve with…

  • Perfect for fast and simple grab sampling of small air volumes (50–500mL) directly into sorbent tubes* Easy, instant sample collection with no complicated pumps to calibrate or maintain Convenient to use anywhere, just attach a sorbent tube to the end of the handheld unit and draw a…

  • Low-cost option for disk extraction; fits standard 3 3/4" x 7 1/2" glass vacuum chambers Doubles sample capacity—holds six disks, compared to standard 12-port manifolds, which only hold three Individual vacuum control for each port improves reproducibility Collection plate…

  • Cleaned, assembled, and ready to use Clear or amber glass Caps and PTFE-lined septa included

  • Ottawa sand is listed in several U.S. EPA methods as the specified medium for matrix spike and laboratory control blanks. Sample medium for matrix spikes and laboratory control blanks Packaged in convenient 5 kg buckets

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.