Chromatography Sample Preparation
-
Quickly and precisely verify flow rates generated by vacuum or pressure before going into the field. These compact, convenient units are ideal for real-time calibration of air flow controllers, passive sampling kits, air canisters, sampling pumps, and more. They measure absolute pressure, mass…
-
Allows sequential sampling of up to 32 thermal desorption tubes (3.5" each) Worry-free, independent operation lets you get more done—simply set up the unit in the field for extended sampling, then retrieve it at the end of the sampling period Reliably collect accurate samples;…
-
Resprep® vacuum manifolds for SPE sample preparation, filtration, and elution are available in 12- and 24-port configurations. These manifolds help in achieving consistent extraction and filtration results. Multiple sample processing with these manifolds simplifies procedures and saves time. The…
-
PEEK Washers for ASE Systems
RestekMeet original equipment manufacturer’s performance Available in various quantities
-
?Proprietary electropolished surface that maintains compound stability. High quality, Bellows-design valve. Now also available with new RAVE valve. U.S. EPA Methods TO-14A and TO-15 regulate the collection, storage, and analysis of volatile organic compounds (VOCs) using treated air…
-
Diskcover-47 Reservoir
RestekThe Diskcover-47 open-top reservoir allows you to pour up to 125 mL of sample directly onto the filter disk holder. It easily installs on top of the Diskcover-47 extraction disk holder. *Must be used with the Diskcover-47 extraction disk holder.
-
Hydrophobic (nonpolar) silica-based adsorbents; used to extract hydrophobic analytes from polar matrices, such as water (e.g., pesticides from water). All cartridges are manufactured using high density polypropylene and have polyethylene frits unless otherwise noted. Cartridges may be…
-
QuEChERS methods are fast, easy, and cost-effective, and Restek Q-sep products make QuEChERS procedures even simpler. All extraction salts, sorbents, and sample tubes are included—no specialized equipment or glassware is required. Prepare samples more efficiently with a complete line of…
-
Ashcroft Test Gauges
RestekHigh-accuracy test gauges are recommended for verifying the vacuum/pressure in canisters before and after sampling. The 6-inch face on the analog gauge allows for easy reading. The digital gauge operates on two AAA batteries and offers an unambiguous readout. Both gauges have an accuracy of +/–…
-
2-inch vacuum/pressure gauges, 316 stainless steel with 1/8" NPT fitting and center back mount. Recommended for use with canisters.
-
Extend the lifetime of air canisters, flow controllers, and other accessories. Serve as a more economical sacrificial connection, protecting more valuable equipment from thread damage. Optional filter frit removes particulates that cause damage, leaks, and valve failure. Standard compression…
-
For ultimate inertness, SilcoCan air sampling canisters feature our unique Siltek treatment technology. Even highly active components, at low parts-per-billion concentrations, can be readily sampled and stored without loss. The RAVE valve is a high-quality, metal-to-metal seal, 2/3-turn valve with…
-
1/4” Diaphragm Valves, RAVE+
RestekExclusive polymer-free construction means no sample contamination from off-gassing or target compound loss due to adsorption. Durable, roller-hardened valve port threads provide superior performance—and every valve is helium leak tested to 1x10 -6 mL/sec. Rugged, work-hardened, proprietary,…
-
Use the CGA-160 inlet connection with 14L Scott/Air Liquide transportable gases. Use the CGA-165 inlet connection with 48L Scott/Air Liquide transportable gases.
-
Easy-VOC Grab Sampler
RestekPerfect for fast and simple grab sampling of small air volumes (50–500mL) directly into sorbent tubes* Easy, instant sample collection with no complicated pumps to calibrate or maintain Convenient to use anywhere, just attach a sorbent tube to the end of the handheld unit and draw a…
-
Resprep SPE Flow Filters
RestekDesigned specifically to improve flow when filtering oil and grease samples Use with Resprep Diskcover-47 reservoir, or any 47 mm glass sample reservoir
-
Diatomaceous earth is used as a filter aid to improve extraction efficiency of densely packed soils, such as clays. By mixing the sample with diatomaceous earth, recoveries can be improved and excess moisture can be absorbed. Packaged in a convenient 1 kg quantity. Improves extraction…
-
Chromatographic Spray
Ace GlassDelivers a true aerosol with no droplets. Enables thorough brushing for uniform development. Spray action begins at .028m3 per minute air flow. Atomization rate approximately 10cc per minute. Easily controlled with thumb pressure on vent hole. Suction stem is 125mm long.
-
-
Can be used for internal or external retaining rings Works to remove retaining ring in all ASE cell caps
-
Celite 503
MilliporeSigmaCAS No.: 68855-54-9 pH: 10 (100 g/l, H2O, 20°C) Solubility: Bulk Density: 300 kg/m3
-
Vacuum Gauges
RestekHigh-quality vacuum gauges with 316 stainless steel wetted surfaces. –30" Hg to 0" Hg. Recommended for use with passive sampling kits. All are rear mount.
-
Swagelok sample cylinders are made of 304L and 316L stainless steel to resist corrosion and DOT rated to 1,800 and 5,000 psig (TPED cylinders rated to 1,450 and 4,350 psig), which allows sampling at gas wellheads as well as on-site refineries. Each cylinder is hydrostatically tested to at least 5/3…
-
Robust, low-flow pump optimized for sampling volatile organic compounds (VOCs) onto thermal desorption (TD) sorbent tubes Small, lightweight, easy to use, and intrinsically safe—ideal for personal monitoring and a wide range of other air and gas sampling applications Compatible with any…
-
Chemker Vacuum Pumps
RestekPTFE wetted parts are highly resistant to corrosive gases Diaphragm-based pump is low maintenance and virtually pollution free Quiet, low-vibration units keep disturbances to a minimum Built-in thermal protector automatically shuts off pump if it overheats and then restarts it once the…
-
Ultra-Clean Resin
RestekEquivalent to XAD-2 Resin—Exclusively from Restek! Ultra-Clean resin typically eliminates the hassle of cleaning and testing resin for air sampling. For adsorbing semivolatiles in air. Cleaned and GC tested. Available in 100 gram quantities.
-
Celite 545 Particle Size 0.02-0.1 mm
MilliporeSigmaCAS No.: 68855-54-9 pH: 10 (100 g/l, H2O, 20°C) Solubility: Bulk Density: 300 kg/m3
-
This unique grab sampler is specifically designed for soil gas sampling by allowing the connection of tubing coming from the soil gas sample port. The innovative design minimizes connections and leaks and houses a critical orifice in the tee fitting. It also incorporates a vacuum gauge and 2…
-
Free-flowing salts transfer easily and completely. Easy-open packets eliminate the need for a second empty tube for salt transfer. Convenient slim packets fit perfectly into tubes to prevent spills. Ready-to-use tubes, no glassware required. Pre-weighed, ultra-pure extraction salts. …
-
Cleaned, assembled, and ready to use Clear or amber glass Caps and PTFE-lined septa included
-
Accelerated solvent extraction is a common technique for fast and reliable extraction of organic materials from solid matrices, using EPA SW-846 Method 3545, Pressurized Fluid Extraction (PFE). Restek offers a wide range of replacement parts to keep your extraction system running smoothly. All…
-
Great value and improved design Eliminates the need for the adaptor fitting on the static and purge valves