CAS: 54-21-7 EC No: 200-198-0 MDL No: MFCD00002440 RTECS: VO5075000 Crystalline Molecular Formula: C₇H₅NaO₃ MW: 160.11 Melting Point: >300° Density (g/mL): 0.35

Component of Hanks′ balanced salt solution Component of plant cell-culture media and of culture media for microorganisms Purification of CAP, catabolite gene activator In the preparation of spheroplasts from E. coli K38

Magnesium chloride hexahydrate (MgCl2·6H2O) is an inorganic salt that can be generated from the acid leach solution of magnesite tailings. It is a potential phase change material (PCM) for storing thermal energy in solar cookers. The result of altering poly (vinyl alcohol)(PVA) films with…

Sodium phosphate is a reagent with very high buffering capacity that is widely used in molecular biology, biochemistry, and chromatography. Sodium phosphate occurs in several forms: monobasic (NaH2PO4), dibasic (Na2HPO4), and tribasic (Na3PO4). Most neutral sodium phosphate buffer solutions consist…

CAS: 5970-45-6 EC No: 209-170-2 MDL No: MFCD00066961 RTECS: ZG8750000 UN No: UN3077; Haz Class: 9; Packing Group: III Powder Linear Formula: Zn(CH₃COO)₂·2H₂O MW: 219.50 Melting Point: 237° Density (g/mL): 1.84

Sodium bicarbonate is broadly used as a physiological buffer in cell culture applications. The pKa for bicarbonate <-> carbonic acid reaction is 6.4 The pKa for bicarbonate <-> carbonate reaction is 10.3. Sodum bicarbonate has two pKas, 6.4 and 10.3. The compound can react with both…

Zinc chloride is a widely used reagent in various industrial processes. These include textile finishing, the etching of metals, the manufacture of parchment paper, and the preparation of galvanizing, soldering, and tinning fluxes. Zinc chloride is also used in organic chemical synthesis, such as in…

Potassium phosphate is a reagent with high buffering capacity. It occurs in several forms: monobasic, dibasic, and tribasic (K3PO4). Most pH neutral potassium phosphate buffer solutions consist of mixtures of the monobasic and dibasic forms to varying degrees, depending on the desired pH. …

Potassium phosphate is a reagent with high buffering capacity. It occurs in several forms: monobasic, dibasic and tribasic. Most pH neutral potassium phosphate buffer solutions consist of mixtures of the monobasic and dibasic forms to varying degrees, depending on the desired pH. Potassium…

CAS: 557-05-1 EC No: 209-151-9 MDL No: MFCD00013031 RTECS: WI4390000 Powder Molecular Formula: C₃₆H₇₀O₄Zn MW: 632.33 Melting Point: 128-130° Boiling Point: 135° Density (g/mL): 0.403

Ammonium Molybdate Tetrahydrate is an analgesic.

Potassium Iodide is known as Potassium Salt of Hydriodic Acid [HI], available in white crystalline powder form. It is a mild reducing agent and can be easily oxidized to Iodine by powerful oxidizing agent like chlorine. With elemental iodine it forms I3 (tri iodide), the salts of tri iodide are…

CAS: 127-09-3 EC No: 204-823-8 MDL No: MFCD00012459 RTECS: AJ4300010 Crystalline/Powder Linear Formula: CH₃COONa MW: 82.03 Melting Point: 300° Flash Point: >250°C (>482°F) Density (g/mL): 1.528

Ferric chloride is a moderately strong Lewis acid and it is used as a catalyst in organic synthesis. The vapor-phase co-reductions with other metal halides by hydrogen results in finely divided intermetallics with applications as structural materials or compounds with useful thermoelectric,…

CAS: 194491-31-1 EC No: 200-573-9 MDL No: MFCD00150025 Solid Molecular Formula: C₁₀H₁₂N₂Na₄O₈·xH₂O MW: 380.17 (anhydrous) Melting Point: >300°

CAS: 6381-59-5 EC No: 206-156-8 MDL No: MFCD00150989 Crystalline Molecular Formula: C₄H₄KNaO₆·4H₂O MW: 282.22

Sodium chloride is a commonly used chemical which is found widely in nature. It is considered to be an essential nutrient. Excess amounts of sodium chloride can destroy electrolyte balance and cause death in most animals, including humans. Sodium chloride is used in a wide variety of biochemical…

Sodium chloride is a commonly used chemical which is found widely in nature. It is considered to be an essential nutrient. Excess amounts of sodium chloride can destroy electrolyte balance and cause death in most animals, including humans. Sodium chloride is used in a wide variety of biochemical…

Ammonium acetate is a chemical compound which is derived from the reaction of ammonia and acetic acid. Ammonium acetate is volatile at low pressures. Because of which it has been used to replace cell buffers with non-volatile salts, in preparing samples for mass spectrometry. It is used as a buffer…

Potassium chloride is a salt commonly used in the preparation of phosphate buffered saline and for the extraction and solubilization of proteins. It is a good potassium source. Also used in the hypotonic KCl-propidium iodide protocol for univariate analysis of metaphase chromosomes; dissociation of…

CAS: 557-04-0 EC No: 209-150-3 MDL No: MFCD00036391 RTECS: WI4390000 Powder Molecular Formula: C₃₆H₇₀MgO₄ MW: 591.27 Melting Point: 200°

Cesium chloride , an inorganic compound, is an important source of cesium ions in a variety of applications. Its crystal structure forms a major structural type where each cesium ion is coordinated by 8 chlorine ions. Cesium chloride occurs naturally in mineral waters and as an impurity in…

Potassium phosphate is a reagent with high buffering capacity. It occurs in several forms: monobasic, dibasic and tribasic. Most pH neutral potassium phosphate buffer solutions consist of mixtures of the monobasic and dibasic forms to varying degrees, depending on the desired pH. Potassium…

Benzalkonium Chloride is a quaternary ammonium salt. It is a cationic surface active agent and germicide. It is not effective against gram-negative bacteria or picornaviruses and it is not recommended for treatment of sanitizing critical or semicritical medical instruments. It has been reported…

CAS: 637-12-7 EC No: 211-279-5 MDL No: MFCD00036389 Powder Molecular Formula: C₅₄H₁₀₅AlO₆ MW: 877.42 Melting Point: 105-115°

Potassium chloride is a widely used reagent in biochemistry and molecular biology. Potassium chloride is a salt commonly used in the preparation of phosphate buffered saline and for the extraction and solubilization of proteins. It is a good potassium source. Also used in the hypotonic…

Used as an electrolyte for low temperature dry battery cells and as an oxidation catalyst. It is a solubilizer for polyamides and cellulose when used with amide solvents, and is a chlorinating agent for steroid substrates. Lithium chloride has also been utilized in: Large scale plasmid DNA…

Ammonium bicarbonate is an inorganic salt commonly used in the food industry. It can be generated by the interaction of gaseous carbon dioxide and aqueous ammonia. The addition of ammonium bicarbonate to microbial fuel cells (MFCs) has been reported to improve its functioning by altering the…

Potassium phosphate is a reagent with high buffering capacity. It occurs in several forms: monobasic, dibasic and tribasic (K3PO4). Most pH neutral potassium phosphate buffer solutions consist of mixtures of the monobasic and dibasic forms to varying degrees, depending on the desired pH. …

Polyethylene glycol (PEG) is a condensation polymer of ethylene oxide and water. PEGs are susceptible to oxidative degradation in the presence of air. Minimizing the exposure of PEG to elevated temperatures and/or exposure to oxygen, or addition of an antioxidant can limit the amount of…

Choline chloride is an organic compound and a quaternary ammonium salt. It is a weak acid. Choline chloride is the salt of the naturally occurring choline, the pre-stage of the neurotransmitter acetylcholine, which is important for mnemonic and thought-processes. Choline occurs naturally in fungi,…

Anhydrous, ACS reagent grade, White Crystalline Powder